35
< 3570 >

RAST 2.5 connectors, pitch 2.5/5.0 mm

RAST 2.5 Power connector for direct and indirect mating, insulation displacement technology (IDT), consecutive placement without loss of pitch
contact pitch 5.0 mm

Approvals: VDE, UL
Data Sheet (PDF)

Technical Data

Environmental conditions

Temperature range: -40 °C/+130 °C  *1

1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card

Materials

Insulating body: PBT GF, V-0 according to UL94 – 3570
PA, V-2 according to UL94 – 3570 M09  *1

Contact spring: Cu alloy, silver-plated – 3570
Cu alloy, tin-plated – 3570 V03

1) M09: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)

Mechanical data

Mating with: printed circuit board 1.5 ± 0.14 mm

Insertion force/contact: ≤ 4.0 N

Withdrawal force/contact: ≥ 0.5 N

Connectable conductors for IDT area

Construction: discrete conductor, notched flat cable 5.0 mm

Section min.: 0,35 mm²

Section max.: 0,82 mm²

Insulation diameter: ≤ 2,5 mm

Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.

Electrical data (at Tamb 20 °C)

Contact resistance: ≤ 5 mΩ

Rated current: 3570:
6 A (Tamb 70 °C)
10 A (indirect mating, 2-5 poles)

3570 V03:
6 A (Tamb 70 °C, max. 4 poles under load)

Rated voltage: 400 V AC

Counterparts

Accessory

Harnessing Equipment

Approved Cables

Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!

The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.

03/2023

Downloads

Poles / Product Inquiry

Designation Poles PU
(pieces)
MDQ
(pieces)
RFQ
(pieces)
Request for quote
(notes)
3570 0223,5283,528
3570 0332,3522,352
3570 0441,7641,764
3570 0551,1762,352
3570 0661,1762,352
3570 0778822,646
3570 0888822,646
3570 0995882,352
3570 10105882,352

Product Inquiry

Branch
Name / Company
Address
Contact