30
Micromodul™ connectors, pitch 1.27 mm
Micromodul™ connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks and toes, with closed sides
| Approvals: | VDE, cULus |
Technical Data
Environmental conditions
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PA GF, V-0 according to UL94 *1
Contact spring: CuSn, pre-nickel and tin-plated – 302299
CuSn, pre-nickel-plated, gold-plated in cotact area, tin-plated in insulation displacement area – 302299 V122
1) component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
Mechanical data
Mating with: printed circuit board 1.6 ± 0.14 mm
Insertion force/contact: < 1.3 N
Withdrawal force/contact: > 0.3 N
Connectable conductors for IDT area
Construction: flat cable 1.27 mm LiYV
Section min.: AWG 28 (0.09 mm²)
Section max.: AWG 26 (0.14 mm²)
Insulation diameter: 1.0 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 1.2 A at Tamb 85 °C
Rated voltage: 125 V AC
40 V (VDE)
50 V AC (UL)
Harnessing Equipment
HZ-M3022
Modular manual tongs for termination of Micromodul™ connectors in insulation displacement technology (IDT)
KHP3022
Knuckle-joint press for termination of Micromodul™ connectors in insulation displacement technology (IDT)
PP3022
Electropneumatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
HA3022e-R
Semiautomatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines
New
VARICON 1000-Eco
Fully automatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
VARICON 1000
Fully automatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
Approved Cables
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
03/2023