36
RAST 5 connectors, pitch 5.0 mm

RAST 5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without locking on printed circuit board, with or without keying rib and closed sides, consecutive placement without loss of pitch
Approvals: | VDE, UL, CSA |
Technical Data
Environmental conditions
Temperature range: -40 °C/+125 °C – 3636 (S...)
-40 °C/+130 °C – 3636 M08(S...) *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PA, V-2 according to UL94 – 3636 (S...)
PA, V-2 according to UL94 – 3636 M08(S...) *1
Contact spring: CuSn, tin-plated
1) M08: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
Mechanical data
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 4,0 N
Withdrawal force/contact: ≥ 1,0 N
Retaining force/locking: ≥ 6,0 N *1
1) measured with a polished steel gauge, nominal thickness 1.5 mm
Connectable conductors for IDT area
Construction: discrete conductor, notched flat cable 5.0 mm
Section min.: 0,34 mm²
Section max.: 0,82 mm²
Insulation diameter: ≤ 2,5 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 6 A (0.75 mm², Tamb 70 °C) – 3636 (M…)
4 A (0.38 mm², Tamb 70 °C) – 3636 (M…)S01
Rated voltage: 250 V AC
Harnessing Equipment

HZ-M36
Modular manual tongs for termination of RAST 5 connectors in insulation displacement technology (IDT)

HZ36-K
Hand tongs for keying of pre-terminated RAST 5 connectors according to RAST 5 standard

KHP36
Knuckle-joint press for termination of RAST 5 connectors in insulation displacement technology (IDT)

HA36e
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT)

HA36e-CA
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT), with integrated cable color detection

HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines

VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
Approved Cables
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
03/2023