36
RAST 5 connectors, pitch 5.0 mm

RAST 5 connector for indirect mating, insulation displacement technology (IDT), with locking on tab, consecutive placement without loss of pitch
Approvals: | VDE, cULus |
Technical Data
Environmental conditions
Temperature range: -40 °C/+125 °C – 3623 01 V01
-40 °C/+130 °C – 3623 01 M08V01
-40 °C/+130 °C – 3623 01 M20V01 *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PA, V-2 according to UL94 – 3623 01 (V01)
PA, V-2 according to UL94 – 3623 01 M08(V01)
PA, V-0 according to UL94 – 3623 01 M20(V01) *1
Contact spring: CuSn, silver-plated
1) M08: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
M20: material halogen-free, GWFI 960 °C (0.75 mm), GWIT 775 °C (0.75 mm)
Mechanical data
Mating with: tab contact 6.3 mm x 0.8 mm according to DIN 46244
Insertion force: ≤ 40 N *1
Withdrawal force: ≥ 15 N *2
1) measured with a polished flat steel pin, nominal thickness 0.8 mm
2) measured with a polished flat steel pin, nominal thickness 0.8 mm
Connectable conductors for IDT area
Construction: discrete conductor, notched flat cable 5.0 mm
Section min.: 0.5 mm²
Section max.: 0.9 mm²
Insulation diameter: ≤ 2.5 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 10 A (0.75 mm², Tamb 70 °C)
Rated voltage: 250 V AC
Counterparts

3641
RAST 5 tab header, upright, with positioning spigot

364199
RAST 5 tab header, upright, with positioning spigot, with pre-mating protective contacts

364197
RAST 5 tab header, upright, with positioning spigot, pottable version

3642
RAST 5 tab header, angular, with topside lock

364299
RAST 5 tab header, angular, with topside lock, with pre-mating protective contacts

3643
RAST 5 tab header, angular, with lower side lock

364399
RAST 5 tab header, angular, with lower side lock, with pre-mating protective contacts

3645
RAST 5 tab header, angular, with lower side lock, higher version

364599
RAST 5 tab header, angular, with lower side lock, higher version, with pre-mating protective contacts

3644
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigots

364499
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigots, with pre-mating protective contacts

3671
RAST 5 tab header, upright, with positioning spigot, free to configure with partitions

3672
RAST 5 tab header, angular, with topside lock, free to configure with partitions

3673
RAST 5 tab header, angular, with lower side lock, free to configure with partitions

3674
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigot, free to configure with partitions

3676
RAST 5 tab header, upright, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)

3677
RAST 5 tab header, angular, with topside lock, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)

3678
RAST 5 tab header, angular, with lower side lock, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)

3679
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigot, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)

3680
Combined RAST 5 tab and socket board, upright, free to configure with partitions, positioning spigot and neutral and/or protective conductor bridge in insulation displacement technology (IDT)

3683
Combined RAST 5 tab and socket board, angular, free to configure with partitions and neutral and/or protective conductor bridge in insulation displacement technology (IDT)

3647
RAST 5 tab header, insulation displacement technology (IDT)

3648
RAST 5 chassis tab header, insulation displacement technology (IDT)

3618
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure opposite to lock

3618-1
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure opposite to lock, with handle latch

3618-2
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure on side of lock

3618-3
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure on side of lock, with handle latch
Harnessing Equipment

HZ-M36
Modular manual tongs for termination of RAST 5 connectors in insulation displacement technology (IDT)

HZ36-K
Hand tongs for keying of pre-terminated RAST 5 connectors according to RAST 5 standard

KHP36
Knuckle-joint press for termination of RAST 5 connectors in insulation displacement technology (IDT)

HA36e
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT)

HA36e-CA
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT), with integrated cable color detection

HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines

VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
Approved Cables
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
03/2023