35
RAST 2.5 connectors, pitch 2.5/5.0 mm

RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of enhanced locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible
for printed circuit boards of 1 mm thickness
contact pitch 2.5 mm
State: | New |
Technical Data
Environmental conditions
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PBT, V-0 according to UL94 *1
Contact spring: CuSn, tin-plated, with lubricant – 3517-5 (M...)S03V214
1) M12: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
Mechanical data
Mating with: printed circuit board 1.0 ± 0.14 mm
Insertion force/contact: ≤ 7.0 N *1
Withdrawal force/contact: ≥ 0.5 N *2
Retaining force/locking: ≥ 13.4 N *3
1) measured with a polished steel pin, nominal thickness 1.0 mm
2) measured with a polished steel pin, nominal thickness 1.0 mm
3) measured with a polished steel gauge, nominal thickness 1.0 mm
Connectable conductors for IDT area
Construction: discrete conductor, notched flat cable 2.5 mm
Section min.: 0.22 mm²
Section max.: 0.38 mm²
Insulation diameter: ≤ 1.6 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 4 A (Tamb 70 °C)
2 A (Tamb 100 °C)
Rated voltage: 32 V
Accessory
Harnessing Equipment

HZ35
Manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)

HZ-M35
Modular manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)

HZ35-K
Hand tongs for keying of pre-terminated RAST 2.5 connectors according to RAST 2.5 standard

KHP35
Knuckle-joint press for termination of RAST 2.5 connectors in insulation displacement technology (IDT)

HA35e
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine, limited upgrading possible

HA35e-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible

HA35e-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated removal of connector chain interlinks, limited upgrading possible

HA35e-DC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, machine to be adapted to the application's requirements

HA35f
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, individual upgrading possible

HA35f-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated cable color detection, individual upgrading possible

HA35f-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection and keying cutting, individual upgrading possible

HA35f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible

HA35f-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting, keying testing and high-voltage test, individual upgrading possible

HA35f-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for keying cutting, individual upgrading possible

HA35f-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for keying cutting and keying testing, individual upgrading possible

HA35f-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for removal of connector chain interlinks, individual upgrading possible

HA35f-RK-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks and cable color detection, individual upgrading possible

HA35f-RK-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, individual upgrading possible

HA35f-RK-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting and keying testing, individual upgrading possible

HA35f-RK-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, fully eqipped with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, keying testing and high-voltage test

HA35f-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for high-voltage test, individual upgrading possible

HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines

VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-DC-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses combined with additional crimp contacts, for flexible harness configurations, machine to be adapted to the application's requirements
Approved Cables
Approved Cables for 3517-5 Download (PDF)
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3517-5 | 0,14 | 7 x Ø 0,16 mm | 6 ± 0,5 | Sn | 1.25 | Silicone | -50/+180 | Leoni Silitherm | ST0101§ | SIF AWG 26 (0,14) |
3517-5 | 0,22 | 7x Ø 0,202 mm | 9 | Sn | 1,4 ± 0,1 | PVC lead-free | -30/+105 | Leoni | 89460080A | LIYW 0,22 mm² SN AWG 24/7 UL 1569 CSA T1 |
3517-5 | 0,23 | 7 x Ø 0,203 mm | < 8,9 | Sn | 1,50 ± 0,10 | PVC | -10/+80 | Medi | 120247xy | UL/ cUL 1007/ 1569 AWG 24 |
3517-5 | 0,25 | 7 x Ø 0,22 mm | 11 ± 2 | Sn | 1.15 | FEP | -90/+180 | Omerin | Siliflon E6YS, 0,25mm² | 0,25mm² |
3517-5 | 0,34 | 42 x Ø 0,10 mm ± 0,007 | 15 ± 3 | - | 1,30 ± 0,05 | PP | -40/+80 | Wenchang | Style 20549 | AWG 22 |
3517-5 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,1 | PVC | +90 | KWL | 605103.96 | LiYW 0,38 mm² |
3517-5 | 0,38 | 12 x Ø 0,21 | 24 | - | 1,4 ± 0,05 | XLPE | -30/+125 | Leoni | 89300020 | Li2X 1x0,38 |
Approved Cables for 3517-5 S01
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3517-5 S01 | 0,35 | 7 x Ø 0,25 mm | 7,8 | Sn | 1,60 ± 0,10 | Special PVC | +105 | Medi | 120227 | UL Schaltlitze AWG 22 |
3517-5 S01 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,40 ± 0,10 | PVC | -40/+70 | Cablena | 40.070.XXX | LiY 0,35-A Sn |
Approved Cables for 3517-5 S03
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3517-5 S03 | 7 x Ø 0,244 mm | 18 | Sn | 1,50–1,64 | PVC | -40/105 | Coficab | 1569SN22007xy | UL 1569 | |
3517-5 S03 | 0,14 | 7 x Ø 0,16 mm | 6 ± 0,5 | Sn | 1.25 | Silicone | -50/+180 | Leoni Silitherm | ST0101§ | SIF AWG 26 (0,14) |
3517-5 S03 | 0,17 | 7 x Ø 0,18 | 12 | - | 1,05 ± 0,05 | PVC | -40/+70 | Leoni | 88A00216# | LiY 1x0,17 BL CuAg |
3517-5 S03 | 0,17 | 7 x Ø 0,185 mm max. | 12 | - | 1,10 - 0,1 | PVC | -40/+105 | Gebauer & Griller | 120994 | FLCuAg01RY 0,17-A/T105 |
3517-5 S03 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012788A | AWG 24 |
3517-5 S03 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3517-5 S03 | 0,22 | 7 x Ø 0,2 mm | 14–20 | Sn | 1,2 ± 0,10 | PVC | -40/+80 | Cable-Net | UL2464 2C*24# 4.0MM WHE | AWG 24 |
3517-5 S03 | 0,22 | 7 x 0,21 mm | 27 | - | 1,10 - 1,20 | PP | -40/+125 | Coficab | 9YA00228000S | FLR9Y-A, 0,22mm² |
3517-5 S03 | 0,22 | 11 x Ø 0,16 mm ± 0,006 | 18 | Sn | 1,40 ± 0,08 | PVC | 80 | Zhengwei | BXBA2498 | AWG 24 |
3517-5 S03 | 0,22 | 7 x Ø 0,20 ± 0,006 | 8-9 | Sn | 1,30 ± 0,05 | FEP | 200 | Rishun | RS201408030 | UL AWM 1332 AWG24 |
3517-5 S03 | 0,22 | 7 x Ø 0,2 mm | 14–16 | - | 1,15 ± 0,05 | PVC | -40/+105 | Suzhou Cableplus | FLRY-A 0,22mm² | 0,22mm² |
3517-5 S03 | 0,22 | 7 x Ø 0,21 | 9 | Sn | 1,4 ± 0,10 | PVC | -40/+105 | Leoni | 89460080# | LiYW 0,22 SN AWG 24/ 7 |
3517-5 S03 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,2 -0,1 | PVC | -40/+105 | Leoni | 76783002# | FLRY 0,22-A |
3517-5 S03 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,2 ± 0,1 | PVC | +105 | Leoni | 76783002K | FLRY 0,22 -A |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | 9 ± 0,2 | Ni | 1,4 ± 0,1 | Silicone | -40/+180 | Leoni/Silitherm | AWM AWG24 Style 3367 | 0,22 mm² |
3517-5 S03 | 0,22 | 12 x Ø 0,1 mm | 18 | Sn | 1,25 ± 0,10 | PVC | +80 | Leoni | 83200505A | LiYY 6X0,22/ 0,1/4,8 BL |
3517-5 S03 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 0,330,38 | PVC | +105 | Eleteck | 0190082-A | AWG 24 |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | 8 | Sn | 1,30 ± 0,10 | FEP | +180 | Rei Hsing | UL1332 24 AWG | UL1332 Teflon Wire AWG 24 300V |
3517-5 S03 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 1,45 ± 0,05 | PVC | +90 | Pan | UL 1007 24# STR 11/0.160X1C | UL 1007 AWG 24 STR 11/1,160 |
3517-5 S03 | 0,22 | 11 x Ø 0,16 mm | 14/16 | Sn | 1,43 ± 0,05 | PVC | +105 | LTK | SK-1569-025 | AWM Style 1569 24 AWG |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | 9,4 | Sn | 1,40 | PVC | +105 | Viakon | OW 76 | 24 AWG AWM Style 1007/1569 105C |
3517-5 S03 | 0,22 | 7 x Ø 0,21 mm | 10 | - | ≤ 1,2 | PVC | -40/+100 | NKT | AP010002 | FLRY-A 0,22 mm² |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | 9 ± 0,2 | Sn | 1,4 ± 0,1 | Silicone | -40/+180 | Leoni/Silitherm | SIF 0,22 mm² | 0,22 mm² |
3517-5 S03 | 0,22 | 19 x Ø 0,127 mm | 15 | Sn | 1,45 ± 0,05 | PVC | +105 | Leoni | 89170475M | LiYW 0,22SNAWG 24 |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | 8 | Ni | 1,4 | Silicone | 180 | Omerin | 0,22 mm² | Silicable 0,22 mm² Style 3367 |
3517-5 S03 | 0,22 | 19 x Ø 0,13 | < 17 | Sn | 1,45 ± 0,1 | PVC | -30/+105 | Amokabel | 1608 | AWG 24 UL1569 FT Slits |
3517-5 S03 | 0,22 | 7 x Ø 0,21 mm | ≤ 20 | - | 1,2 -0,1 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,22-A/T125 | FLR9Y 0,22-A |
3517-5 S03 | 0,22 | 19 x Ø 0,127 mm | 7 | Sn | 0,96 | PTFE | +180 | HEW | 18880 | HEW-PTFE/ Silikonltg./ TEHSI-Cu vn 2xAWG24 |
3517-5 S03 | 0,22 | 7 x Ø 0,193 mm | 13.6 | Sn | 1,55 ± 0,1 | PVC | -10/+105 | Vercavi | HJ1X24----S0 | 1xAWG24 Style 1007/ 1569 |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | 16 | Sn | 1.5 | PVC | +105 | BizLink | 10.0785.xxxYYYYY | UL 1569 AWG 24 |
3517-5 S03 | 0,22 | 7 x Ø 0,2 mm | 11 | Sn | 1,45 ± 0,05 | PVC | -25/+105 | KBE | 4100242110200K | AWG 24 |
3517-5 S03 | 0,22 | 7 x Ø 0,2 mm ± 0,005 | 10 ± 3 | - | 1,20 ± 0,1 | FEP | 180 | Mysun | VDE8207 | 24 AWG |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | ≤ 13 | Sn | 1,25 ± 0,07 | PVC | -20/+70 | Sterner | 1000000511 | LiYY 3 x 0,22 mm² |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm ± 0,008 | 0,5" | Sn | 1,0 ± 0,05 | PVC | -30/+80 | LZY | SP-1571/24-001 | AWM 1571 24 AWG |
3517-5 S03 | 0,22 | 7 x Ø 0,20 mm | 15 | Sn | 1,5 ± 0,05 | PVC | +105 (UL)/+80 (CSA)/+90 | Medi | 120247 ... | |
3517-5 S03 | 0,23 | 7 x Ø 0,203 mm | 8.5 | Ag | 1,35 ± 0,05 | FP-PTFE | -190/+200 | Leoni | 13993 | Fp AWG 24 (7sp) |
3517-5 S03 | 0,23 | 7 x Ø 0,203 mm | ca. 7,7 | Ag | 1,26-1,42 | PTFE | -190/+150 | HEW | VE10503 | PTFE AWG 24/7, UL 1164 |
3517-5 S03 | 0,23 | 7 x Ø 0,203 mm | ≤ 8,90 | Sn | 1.2 | SR-PVC | -10/+105 | Klasing | 6019430 | Y-J-UL 2517, 0,23mm² |
3517-5 S03 | 0,24 | 7 x Ø 0,21 mm | 17 | Sn | 1.3 | XPE | -40/+150 | Gebauer & Griller | FLR2X 0,22sn-A/T150-GG#127926 | FLR2x0,22 mm² |
3517-5 S03 | 0,25 | 32 x Ø 0,11 mm | ≤ 19 | - | 1,3 -0,1 | TPE-S | -40/+125 | Coroplast | 8-8500 | FLR31Y 0,25mm²/0,11 |
3517-5 S03 | 0,25 | 14 x Ø 0,15 | 16,62 | - | 1,30 ± 0,05 | PVC | -15/+70 | Arvo | 0040022P | LiYY 2 x 0,25mm² |
3517-5 S03 | 0,25 | 19 x Ø 0,12 ± 0,005 mm | 11 ± 2 | Sn | 1,55 ± 0,05 | FEP | +200 | Shenjiang | SJSPRD817 | AWG 24 UL 1332 |
3517-5 S03 | 0,25 | 32 x Ø 0,11 mm | 16 ± 3 | - | 1,2 | TPE | +125 | Leoni | 88A00076 | LI31Y 1 x 0,25 mm² |
3517-5 S03 | 0,25 | 32 x Ø 0,10 mm | 17.6 | - | 1,27 ± 0,10 | PVC | -20/+105 | ByK | 0113025127400 | FLRY-B 0,25 mm² |
3517-5 S03 | 0,25 | 14 x Ø 0,150 mm | 60 | - | 1,25 ± 0,05 | PVC | -40/+105 | Arvo | 13305 | LiYwYw 4x0,25 sqmm |
3517-5 S03 | 0,25 | 19 x Ø 0,13 mm | 6 | - | 1,30 ± 0,10 | PFA | +180 | Omerin | D1410024 | Silifon Style 1726-CN51YS |
3517-5 S03 | 0,25 | 14 x Ø 0,15 | 60 | - | 1,3 | PVC | -5/+70 | Bruns | 311002502 | LiYCY 2x0,25 |
3517-5 S03 | 0,25 | 7 x Ø 0,199 -0/+0,012 | 8-12 | - | 1,22-1,33 | PVC | -15/+90 | Prysmian | Protodur LiYW 0,25mm² | LiYW 0,25mm², Ince Izole 0,25 |
3517-5 S03 | 0,25 | 19 x Ø 0,127 mm | 8,2 | Ni | 1,16 ± 0,10 | PTFE | +260 | L. Jung | 0231 0090 - 20 | Tefloneinzelader/ AWG24/19 NPC 5Y |
3517-5 S03 | 0,25 | 32 x Ø 0,11 mm | 16 | - | 1,30 ± 0,10 | PVC | +90 | Coroplast | 6-0324 (0,25/16)-A1 | FLRY 0,25mm² |
3517-5 S03 | 0,25 | 7 x Ø 0,199 -0/+0,012 | 8-12 | - | 1,42-1,48 | PVC | -15/+70 | Prysmian | Protodur LiY 0,25mm² | LiY 0,25mm², Kalm Izole 0,25 |
3517-5 S03 | 0,25 | 32 x Ø 0,11 mm | 12 | - | 1,30 ± 0,10 | PVC | +90 | Coroplast | 6-0324 (0,25/12)-A1 | FLRY 0,25mm² |
3517-5 S03 | 0,3 | 12 x Ø 0,18 mm | 7,5–9,0 | Sn | 1,6 ± 0,10 | Irradiated PE | 135 | Kurabe | PEX-F | 0.3 mm² |
3517-5 S03 | 0,3 | 7 x Ø 0,193 mm | 55 | - | 1,51 ± 0,05 | PVC lead-free | +70 | Condumax | NM 247-3 | Flex Cable 300V 0,30mm2 |
3517-5 S03 | 0,325 | 19 x 0,15 mm | 9.6 | Sn | 1.6 | Varpren | -30/+125 | Omerin | 37850104 | Varpren 125 UL, AWG 22 Style 3266 |
3517-5 S03 | 0,34 | 7 x Ø 0,25 mm | 70 | - | 1,50 ± 0,05 | PVC | 70 | Leoni | 83A00034A | LIYY 2x 0,34 bl |
3517-5 S03 | 0,34 | 17 x Ø 0,16 mm | 18 | Sn | 1,58 ± 0,05 | PVC | -10/+105 | BizLink | 10.0562.xxxYYYY | UL 1569 AWG 22 |
3517-5 S03 | 0,34 | 7 x Ø 0,25 +/- 0,008 | 15 +/- 1,5 | - | 1,5 ± 0,05 | PVC | -40/+105 | Jiangyang | LiYY 2 x 0,34 mm² | 0,34mm² |
3517-5 S03 | 0,34 | 7 x 0,25 mm | 18 | Sn | 1,6 ± 0,05 | PVC | 105 | IRCE | 41HG01000324087K | Style 1569 AWG 22 |
3517-5 S03 | 0,34 | 17 x Ø 0,16 mm | 20 | Sn | 1,56 ± 0,1 | PVC | 105 | 3F | UL 1569220_-17 | AWG 22, UL 1569 |
3517-5 S03 | 0,34 | 7 x Ø 0,25 | 12,6 | Sn | 1,35 | PTFE | +180 | Habia | 700022246 | AWG22 |
3517-5 S03 | 0,34 | 19 x Ø 0,15 mm | 14 | Sn | 1,60 ± 0,05 | PCV | -25/+105 | KBE | 4100230110130K | AWG 23 Style 1569 |
3517-5 S03 | 0,34 | 19 x 0,16 mm | 9.6 | Sn | 1.6 | Varpren | -50/+155 | Omerin | 37060102 | Varpren 155, 0,34 mm² |
3517-5 S03 | 0,34 | 7 x 0,26 mm | 15 | Sn | 1,4 ± 0,1 | PVC | -40/+105 | KBE | 5000340110250A | LiY 0,34 mm² |
3517-5 S03 | 0,34 | 7 x Ø 0,243 mm | 19,05 | Sn | 1,5 ± 0,08 | PVC | +105 | Copperfield | 22021- | 22 7/.0096 TC AWM 1569 or 1007 TR64 or AWM I A/B |
3517-5 S03 | 0,34 | 19 x Ø 0,15 mm | < 15 | Sn | 1,55 + 0,03 | PVC lead-free | +105 | Alstermo | 1341 | PVC-AWG23 Style1569 Litze |
3517-5 S03 | 0,34 | 7 x Ø 0,25 mm | ≤ 13 | Sn | 1,25 ± 0,05 | PVC | -25/+105 | Sterner | 061E000047 | KS-LiYv-T 1x0,34 qmm |
3517-5 S03 | 0,34 | 7 x Ø 0,25 mm | 14 | Sn | 1,4 ± 0,1 | TPE | +120 | Coroplast | 8-0284 | LI31Y 0,34mm² |
3517-5 S03 | 0,34 | 17 x Ø 0,16 mm | ≤ 0,8" | Sn | 1.6 | PE | 125 | Furukawa | Beamex-ER470 | AWG 22 |
3517-5 S03 | 0,34 | 7 x Ø 0,26 mm | 15 | - | 1,40 ± 0,10 | TPE SEBS 55 D | -40/+120 | KBE | 1500340110250S | LI 32Y 0,34 mm² |
3517-5 S03 | 0,34 | 17 x 0,16 mm | 18 | Sn | 1,58 ± 0,05 | PVC | 80 | Leoni | 10.097.999F5007 | AWG 22 |
3517-5 S03 | 0,34 | 19 x Ø 0,15 mm | < 15 | - | 1,55 + 0,3 | PVC | +105 | Alstermo | 1569 105 | AWG 23/Style 1569 |
3517-5 S03 | 0,34 | 7 x Ø 0,25 mm | 17 ± 0,05 | - | 1,50 ± 0,05 | PVC | +105 | WanRong | WR10-01 | 2 x 0,34 mm² 300/300 V |
3517-5 S03 | 0,34 | 17 x Ø 0,16 mm | ≤ 20 | - | 1,60 ± 0,05 | PVC | +105 | Perennial | WL1569E02 | UL1569 22AWG (17/0,16 AS) |
3517-5 S03 | 0,34 | 7 x Ø 0,254 mm | 10,5 | Sn | 1,60 ± 0,05 | PVC lead-free | +105 | KBE | 4100220410245K | UL22AWG AWM Style 1569 |
3517-5 S03 | 0,34 | 7 x Ø 0,254 | 10 +/- 3 | - | 1,5 ± 0,1 | PVC | -40/+105 | Leoni China | LC-10-0587 | LiYY 2 x 0.34 |
3517-5 S03 | 0,34 | 19 x Ø 0,16 | 6,4-10,9 | Sn | 1,60 ± 0,10 | Polyolefin, cross-linked | -30/+120 | Medi | 137229M01 | AWG 22 |
3517-5 S03 | 0,34 | 17 x Ø 0,16 mm | 16/19 | Sn | 1,58 + 0,05 | PVC | +105 | LTK | SK-1569-020 | AWM Style 1569 22 AWG |
3517-5 S03 | 0,34 | 7 x Ø 0,254 +/- 0,007 | 13-15 | - | 1,4-1,6 | PVC | -40/+105 | Rishun | LiYY 2 x 0,34mm² | 0,34mm² |
3517-5 S03 | 0,34 | 7 x Ø 0,26 mm | 10 | Sn | 1,40 ± 0,10 | Silicone | +180 | Coroplast | 9-1130 (VM 9-1125) | LI2G 0,34 mm²/ Shore Härte A80 |
3517-5 S03 | 0,34 | 7 x Ø 0,25 mm | 13-15 | Sn | 1,55 | Polyolefin | -40/ +90 | Nexans | 2PJ983 | AWG 22 |
3517-5 S03 | 0,34 | 7 x Ø 0,255 mm | 18 | - | 1,25 ± 0,1 | PVC | +70 | Kablo Elektro | MY 47003402 | LiYY 2X0,34mm2 |
3517-5 S03 | 0,34 | 19 x Ø 0,15 mm | 18 ± 3 | Sn | 1,50 ± 0,05 | PVC | -20/+105 | Salcavi | X42650 | AWM Style 1569/ 1007 I A/B AWG 22 |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 -0,2 | PVC | -40/+105 | KBE | 1000350110195A | FLRY 0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +70 | Prysmian, Turkey | 2006-VS-70-035 | 05V-K 0.35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +260 | Omerin | 150.15.01.00K | PFA 1x0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,4 -0,2 | XPE | -40/+150 | Gebauer & Griller | 121350 FLR2X 0,35 A/ T 150-GG#111147 | FLR2X 0,35 mm² |
3517-5 S03 | 0,35 | 7 x 0,26 mm | 25 | - | 1,3 - 0,1 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,35-A/ T125 SW-GG#126364 | FLR9Y 0,35-A/ T125, 0,35mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +90 | Prysmian, Turkey | 2006-VS-90-035 | 05V2-K 0.35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | ≤ 12,60 | Sn | 1,65 ± 0,05 | Soft PVC | -40/+105 | Arvo | 267221 | LiYv AWG 22/7 |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 ± 0,85 | Ag | 1,3 ± 0,1 | TE-100 | -190/+200 | HEW | 3607 | PTFE Litze AWG 22 |
3517-5 S03 | 0,35 | 12 x 0,21 mm | ≤ 27 | - | 1,2-1,4 | XLPE | -40/+125 | Condumex | FLRY-B 0,35mm², blue | 0,35mm² |
3517-5 S03 | 0,35 | 7 x 0,26 mm | 23 | - | 1,3 - 0,1 | ETFE | -65/+180 | Leoni MoCar | 76820010F | Mocar 180E 0,35-A/ 1,25 |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 9,53 | Sn | 1,6 | PVC | +105 | Champlain | 1430 / 22107 | 22 7TC 105C 300V 1430 016 XLPVC CSA REW |
3517-5 S03 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,35 +0,1/-0,05 | PVC | -10/+105 | Vercavi | HH1035----SF | FR 3/2 1 x 0.35mm² |
3517-5 S03 | 0,35 | 7 x 0,26 mm | 22 | - | 1,2-1,3 | PVC | -40/+100 | NKT | AP010003 | FLRY-A 0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +180 | Cet | 150.15.01.00T | PFA 1x0,35 mm² |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 23 ± 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YBSN0035xxyy | FLRY-B |
3517-5 S03 | 0,35 | 7 x Ø 0,25 | 13 | Sn | 1,35 | PFA | +180 | Sami | Q0TA3BPGxx | AWG22 |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 23 ± 3 | - | 1,3 -0,1 | XPE | -40/+150 | Coficab | 2X4A0035XXYY | FLR2X T4 0,35mm² A |
3517-5 S03 | 0,35 | 7 x Ø 0,245 mm | 30 | - | 1,25-1,40 | PVC | 105 | Coficab | C.UN.035MM2 PSA T2 NE | PSA 0,35 mm² IR T2 |
3517-5 S03 | 0,35 | 7 x Ø 0,27 mm | ≤ 27 | - | 1,20-1,40 | PP | -40/+125 | Coficab | A39YA00354055 | A39Y-3TAD |
3517-5 S03 | 0,35 | 19 x Ø 0,16 mm | 15 | - | 1,58 + 0,05 | PE FR | +120 | Amokabel | 1517 | RX 0,35 300 V |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 15 ± 3 | - | 1,45 ± 0,1 | PVC | -40/+70 | Cablena | 40.028.300.2 | LiY 0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | 20 | - | 1.32 | PE | -40/+150 | Acome | T6436H | A4Z 0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 20.5 | - | 1,20–1,30 | PE | -40/+125 | Acome | T5010E | A3BW ZH A 0,35 mm² |
3517-5 S03 | 0,35 | 12 x Ø 0,19 mm | 28 | Sn | 1,40 | PVC | +90 | IRCE | 2277 | S03V2-K 1X0,35 |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 23 ± 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | EFYBSN00358000 | FLRY-B 0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,10 | ETFE | +150 | HEW | 2838 | HEW-ETFE Aderltg. Vz AWG 22 |
3517-5 S03 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2 | Sn | 1,40 ± 0,20 | PVC | -5/+70 | Tele-Fonika | TT1-7266v3 | LiYc 0,35 mm² |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 20 ± 5% | Sn | 1,20–1,30 | PVC | -40/+105 | Cablena | 06.102.xxx.x | FLRY-B 0,35 SN |
3517-5 S03 | 0,35 | 7 x Ø 0,27 mm | 20 | Sn | 1,20-1,40 | PE | -40/+150 | Draka | FLR91X-A hffr 0,35 Sn SWWS | FLR91X-A hffr |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,20-1,30 | PVC | -40/+105 | Coficab | YBF00350540 | YBF |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,3 -0,1 | PVC | -40/+125 | Coficab | DRYWA0035xxyy | FLRYW 0,35-A |
3517-5 S03 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2,0 | Sn | 1,40 ± 0,2 | PVC | -5/+70 | Telefonika | TT1-7266v2 | LiY c 0,35 mm² |
3517-5 S03 | 0,35 | 19 x Ø 0,16 mm | 17 | - | 1,4 -0,2 | XPE | -40/+150 | Gebauer & Griller | GG# 146234 | FLR2X 0,35(0,15) /T150 |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | 12 | Sn | 1.6 | PVC | -5/+70 | Telefonika | TT1-7129 | LiY c 0,35 mm² |
3517-5 S03 | 0,35 | 12 x Ø 0,19 mm | 14 | Sn | 1,30 ± 0,05 | PVC | -40/+105 | Telefonika | TT1-4142 | FLRY-B 0,35mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 17 | - | 1,30 ± 0,10 | TPE-E | +150 | Gebauer & Griller | 68534 | FLR12Y 0,35-A |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | ≤ 27 | - | 1,4 -0,2 | PVC | -40/+105 | Coficab | YB0035XXYY | FLRY-B 0,35 |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 11,5 | - | 1,25 ± 0,05 | Polyolefin | +150 | Huber + Suhner | 12567923 | Radox 155S RW |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 16 ± 2 | - | 1,5 ± 0,1 | PVC | ≤ +90 | Salcavi | R46117 | FR70R90S 2x0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22---S5 | AWG 22 (0,35 mm²) UL1569 |
3517-5 S03 | 0,35 | 12 x Ø 0,193 mm | 20.3 | Sn | 1,60 ± 0,1 | PVC | -15/+105 | Vercavi | HJ1x22---S1 | AWG 22 UL 1569 |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 15 ± 2 | Sn | 1,40 ± 0,10 | PVC | -40/+105 | KBE | 5000350110250A | LiY 0,35 mm² |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 18 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YASN0035xxyy | FLRY-B |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730857 | LIY 1x0,35 BL 1,4mm |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 1,35 ± 0,05 | PFA | -60/+180 | Industria Cavel | PF22CSK# | AWG 22 |
3517-5 S03 | 0,35 | 19 x Ø 0,16 mm | 17 | - | 1,2-1,4 | PP | -40/+125 | Gebauer & Griller | GG# 146238 | FLR9Y 0,35 (0,15)/T125 |
3517-5 S03 | 0,35 | 7 x Ø 0,26 | 20,4 | - | 1,25 ± 0,05 | PE | -40/+150 | Acome | T6510 A4F LH A 0.35mm² | 0,35 mm² (AWG22) |
3517-5 S03 | 0,35 | 19 x Ø 0,16 mm | < 17 | - | 1,58 +0,05/-0,03 | PVC | +105 | Alstermo | 1288 | AWG 22/Style 1569 |
3517-5 S03 | 0,35 | 7 x Ø 0,25 | 30 ± 5 | - | 1,3 ± 0,1 | PVC | -40/+125 | ICC | Cable Fiat 91107/17 | FLR9Y-B 0,35mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,4 | XPE | -40/+150 | Gebauer & Griller | 111147 | FLR2x0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64210515# | S03VV-F 4x0,35BL SKT 4,9mm | |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,30 - 0,10 | Soft-PVC lead-free | -40/+105 | Leoni | 76783010# (K999KPK01) | FLRY 0,35-A (AWG 22) |
3517-5 S03 | 0,35 | 7 x Ø 0,245 mm | 30 | - | 1,25-1,40 | PVC | -40/+125 | Coficab | B300358000S | 0,35 AWG 22 IRT3 |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,5 ± 0,1 | PVC | +90 | Baohing | FBSBH -204/3-SWR | H05V2-K 0,35mm² | |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | Sn | 1,25 ± 0,10 | FEP | -50/+180 | Sontec | BT-6901 | SL-FEP | |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 12-26 | - | 1,5 ± 0,10 | PVC | 70 | Baohing | SWE-FBBH-169-H4WY | H05V-K 0,35mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,25 | 30 | - | 1,3 ± 0,1 | PVC | -40/+105 | ICC | C738000D | FLRY-B 0,35mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 0.4 | Polyolefine | 125 | Nexans | EPX 125 FR | AWG 22 |
3517-5 S03 | 0,35 | 7 x Ø 0,254 ± 0,008 mm | - | 1,30 ± 0,10 | TPE-E | -40/+150 | LTK | ST-FL/YA-130M | FLR13Y-A | |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Cu-ETP1 | 1,30 -0,1 | TPE-S | -40/+125 | Leoni | 76M00141 | MOCAR 125 S 0,35-A Deca BDE free |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,30 - 0,1 | TPE-E | -40/+150 | Leoni | 76M00020 | MOCAR 150C 0,35A |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 25,4 | - | 1,501,70 | PVC | +85 | Dixie | MS7889-22 | MIL 120A, GPT-TW, 22AWG |
3517-5 S03 | 0,35 | 7 x 0,25 mm | 5-10 | Sn | 1,25 ± 0,03 | PVC | -40/+70 | Leoni | 88030810# | LiY 0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | < 27 | - | 1,21,3 | PVC | -40/+105 | Coficab | YA0035xxyy | FLRY |
3517-5 S03 | 0,35 | 12 x Ø 0,2 mm | 30 ± 10 | - | 1,30 ± 0,1 | PVC | -40/+105 | ICC | C8460004 | FLRY-B |
3517-5 S03 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -40/+90 | Coficab | BLIYW00352500 | LiYW |
3517-5 S03 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Coficab | BLIY00355000 | LiY |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,30 ± 0,1 | TPE-E | -40/+150 | Gebauer & Griller | 68534 | FLR13Y-A 0,35 mm² |
3517-5 S03 | 0,35 | 19 x Ø 0,15 mm | 20 ± 3 | - | 1, 55 ± 1,6 | TPV | -40/+100 | Nexans | 13050017 | SY 0.35 |
3517-5 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11575 | |
3517-5 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11529 | |
3517-5 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R10789 | |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | 16 | - | 1,35 ± 0,10 | PVC | +105 | Nursan | K04JG0 | 0,35mm² |
3517-5 S03 | 0,35 | 12 x Ø 0,194 mm | 20,40 | Sn | 1,35 +0,1/-0,05 | PVC | +105 | Vercavi | HH1035BI00SE | FR3/2 HAT 105 SEZ 1X0,35 |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64240615B | L03VV-F 6x0,35 BL | |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 26 | - | 1,3 ± 0,10 | PVC | 90 | Baohing | C1112828 | FB S03V2-R |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | - | 1,2 - 1,3 | PP | -40/+125 | Coficab | 9YA00358000S | FLR9Y-A | |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 ± 0,10 | PVC lead-free | +105 | Coroplast | 6-0111 | FLRY 0,35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 10 | Sn | 1,35 ± 0,05 | FEP | -25/+180 | Leoni | 89030535A | LI6Y6Y 1x0,35 SN |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | 11 | Sn | 1,35 ± 0,05 | FEP | -55/+150 | Leoni | 89A00019 | LI6Y6Y 1x0,35 SN AWG22 |
3517-5 S03 | 0,35 | 12 x Ø 0,193 | 16,8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22----S1 | AWG22 |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,04 | PTFE | +200 | Habia | 404-21033-040 | PTFE 0.35 Z |
3517-5 S03 | 0,35 | 7 x Ø 0,254 mm | 32 | Sn | 1,6 ± 0,10 | XLPE | 150 | Baohing | C1307832 | AWG 22 |
3517-5 S03 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 16 | - | 1,58 +0,02/-0,03 | PVC | -25/+105 | KBE | 4100220100194K | UL 22 AWG AWM Stylle 1569 |
3517-5 S03 | 0,35 | 12 x Ø 0,20 | 27 | Sn | 1,4 ± 0,1 | PVC | +70 | Leoni | 88730860A | LiY 1x0,35 SN SKT |
3517-5 S03 | 0,35 | 12 x Ø 0,21 mm | 35 | Sn | 1,4 -0,2 | PVC | -40/+105 | Leoni | 76783016K | FLRY-B 0,35SN-B/T105 |
3517-5 S03 | 0,35 | 19 x Ø 0,16 mm | 8,6 | Sn | 1,25 ± 0,05 | ETFE | +150 | Habia | 504-27012-070 | C3 7Y(Z) AWG22/19 ws |
3517-5 S03 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | +70 | Taicheng Tongling | LIY-0.35mm² | LIY 0.35 mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,254 | 8 +/- 3 | Sn | 1,35 ± 0,08 | PFA | +250 | Haerkn | HK20130924002E | AWG22 |
3517-5 S03 | 0,35 | 7 x Ø 0,27 | 25 | - | 1,23 ± 0,04 | XPE, cross-linked | -40/+150 | Gebauer & Griller | 135393 | FLU2X 0,35-A /T150 SW |
3517-5 S03 | 0,35 | 7 x Ø 0,26 | 15 | Sn | 1,35 | PVC | +105 | C.E.Cam. | V2035135PCS | AWG22 |
3517-5 S03 | 0,35 | 7 x Ø 0,26 mm | - | 1,25 - 1,40 | PVC | -40/+100 | Coficab | IRT200358000 | IRT2 | |
3517-5 S03 | 0,35 | 7 x Ø 0,25 mm | 27 | - | 1,25 ± 0,05 | PVC | -40/+105 | Coficab | YA00358000S | FLRY-A |
3517-5 S03 | 0,35 | 19 x Ø 0,16 | 10 | Sn | 1,25 ± 0,03 | FEP/FEP | -100/+180 | Coroplast | 18-1153 | LI6Y6Y 0,35mm² |
3517-5 S03 | 0,35 | 7 x Ø 0,254 | 15 +/- 3 | Sn | 1,35 ± 0,08 | PVC | +105 | Haerkn | HK20130924001E | AWG22 |
3517-5 S03 | 0,355 | 7 x Ø 0,245 mm | 17 ± 10 % | Sn | 1,55 +0,02/-0,04 | PCV | -25/+105 | KBE | 4100225110245K | AWG 22 Style 1569 |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | Sn | 1,58 + 0,02/-0,03 | PVC lead-free | +105 | Leoni, Mexico | 89170842A | LIYW 0,38 Sn AWG 22/12 UL1569 CSA T1 |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm | 24 | - | 1,40 ± 0,1 | TPE | +110 | Leoni | 89300020A | LI2X 1X0,38/12/1,4 BL |
3517-5 S03 | 0,38 | 17 x Ø 0,160 mm | 20 | Sn | 1,60 ± 0,10 | PVC | +80 | Future Max | E174587 | UL 1007/HOOK-UP WIRE |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,58 ± 0,02 | PVC | -10/+105 | Leoni | 89170840A | LiYW 0,38 BL (AWG 22/ 12) |
3517-5 S03 | 0,38 | 19 x Ø 0,16 +/- 0,005 | 15 +/- 2 | Sn | 1,55 +/- 0,05 | PVC | 80 | Xin Zheng Heng | 22A0455RS1 | AWG 22 |
3517-5 S03 | 0,38 | 12 x Ø 0,194 | 10-14 | - | 1,4-1,6 | PVC | +80 | Taicheng Tongling | LiY 0,38mm² | LiY 0,38mm² |
3517-5 S03 | 0,38 | 12 x Ø 0,203 mm | 14,4 ± 10 % | Sn | 1,35 ± 0,05 | TETE-302 | -100/+180 | HEW | 23069 | TETE 0,38 mm² |
3517-5 S03 | 0,38 | 19 x Ø 0,16 mm | 8,4 | Sn | 1,911,99 | TE-302 | +150 | HEW | 36247 | HEW-FEP-Aderleitung |
3517-5 S03 | 0,38 | 19 x Ø 0,160 mm | 6/10 | Sn | 1,17 + 0,20 | ETFE | +135 | Draka | 36824 | C3 7Y (Z) 22/19 ws Sp 1500 |
3517-5 S03 | 0,38 | 19 x Ø 0,16 mm | 12,6 | Sn | 1,7 | Special PVC | +105 | Medi | 120229 | |
3517-5 S03 | 0,38 | 12 x Ø 0,20 mm | 27 | Sn | 1,5 ± 0,1 | PVC lead-free | +105 | Leoni | 88730872A | LIYW 1 x 0,38/0,2-S SN SKT |
3517-5 S03 | 0,38 | 12 x Ø 0,194 | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Leoni China | LC-10-0584 | LiY 0,38 |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+105 | Cablena | 1116 | LiYW 0,38 mm² |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+70 | Leoni | 88200132 | LIY |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+70 | Cablena | 2335 | LiY 0,38 mm² |
3517-5 S03 | 0,38 | 12 x 0,203 mm | 14,4 ± 10% | Sn | 1,15 ± 0,1 | FEP | -100/+180 | HEW | 68905 | TE-Aderleitung |
3517-5 S03 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730855 | LIY 1x0,38 BL 1,4mm |
3517-5 S03 | 0,38 | 7 x Ø 0,20 mm | 17 | - | 1,60 ± 0,05 | PVC | +105 | Jiangyang | 9000162431 | RV 1X0,38mm² |
3517-5 S03 | 0,38 | 19 x Ø 0,16 mm | 16 ± 3 | Sn | 1.4 | XLPE | 120 | Kurabe | AESSX 0.3f, SP3521K | 0,38 mm² |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC lead-free | +105 | Leoni, Poland | 88200130M | LiYW 0,38 mm² |
3517-5 S03 | 0,38 | 12 x Ø 0,194 | 15 +/- 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Leoni China | LC-10-0581 | LiY 0,38 mm² |
3517-5 S03 | 0,38 | 19 x Ø 0,16 ± 0,005 | 15 ± 2 | Sn | 1,55 ± 0,05 | PVC | 80 | Xin Zheng Heng | 22A0455BS1 | AWG 22 |
3517-5 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+105 | Leoni | 88200130 | LIYW |
3517-5 S03 | 0,38 | 12 x Ø 0,21 mm | 21/21,6 | - | 1,4 ± 0,05 | VPE | +110 | Kromberg & Schubert | 352118 | FLR2X 0,38 mm²-B |
3517-5 S03 | 0,38 | 12 x Ø 0,21 mm | 16 | - | 1,60 ± 0,20 | PVC lead-free | +110 | KBE | 1800380000195C | FLYW 0,38 mm² |
3517-5 S03 | 0,38 | 12 x Ø 0,194 ± 0,006 mm | 15 | - | 1,40 ± 0,05 | PVC | +5/+70 | Leoni | 88200132Z | LiY 0,38 mm² |
3517-5 S03 | 0,38 | 12 x Ø 0,2 mm | 14 | - | 1,4 | HFFR | -30/+70 | Leoni | 88A00015 | LiH 0,38 |
3517-5 S03 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +90 | Leoni | 88730856 | LIYW 1x0,38 BL 1,4mm |
3517-5 S03 | 0,39 | 19 x Ø 0,17 mm | 15.2 | Sn | 1,60 ± 0,1 | PVC | -30/+105 | Leoni | 89760101A | LiYW 0,39 SN AWG 22 |
3517-5 S03 | 0,5 | 19 x 0,19 mm | 20 | - | 1,6-0,2 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,5-A/ T125 SW-GG#145498 | FLR9Y 0,5-A/ T125, 0,50mm² |
3517-5 S03 | 0,54 | 19 x Ø 0,19 mm | 23 | Sn | 1.6 | XPE | -40/+150 | Gebauer & Griller | FLR2X 0,5sn-A/T150-GG#111603 | FLR2X 0,5 mm² |
Approved Cables for 3517-5 S04
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3517-5 S04 | 0,12 | 7 x Ø 0,16 mm | 8.9 | Sn | 1,05 ± 0,05 | TPE | -40/+125 | Leoni | 88A00142 | Li31Y 1x0,12 SN |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
03/2023