35
RAST 2.5 connectors, pitch 2.5/5.0 mm
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, for ribbon cable
contact pitch 2.5 mm
| Approvals: | cULus |
Technical Data
Environmental conditions
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PBT, V-0 according to UL94 – 3517-2 (S...V...)
PA, V-2 according to UL94 – 3517-2 M12(S...V...) *1
Contact spring: CuSn, tin-plated – 3517-2 (M...S...)
CuSn, tin-plated (Sn/Ag), 2-9 poles – 3517-2 (M...S...)V03
CuSn, pre-nickel and gold-plated – 3517-2 (M...S...)V102
1) M12: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
Mechanical data
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 4,0 N *1
Withdrawal force/contact: ≥ 0,5 N *2
Retaining force/locking: ≥ 6,0 N *3
1) measured with a polished steel pin, nominal thickness 1.5 mm
2) measured with a polished steel pin, nominal thickness 1.5 mm
3) measured with a polished steel gauge, nominal thickness 1.5 mm
Connectable conductors for IDT area
Construction: discrete conductor, flat cable 2.5 mm
Section min.: 0,14 mm²
Section max.: 0,38 mm²
Insulation diameter: ≤ 1,6 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 4 A (Tamb 60 °C)
2 A (Tamb 100 °C)
Rated voltage: 32 V AC
Harnessing Equipment
HZ35
Manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ-M35
Modular manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ35-K
Hand tongs for keying of pre-terminated RAST 2.5 connectors according to RAST 2.5 standard
KHP35
Knuckle-joint press for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HA35e
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine, limited upgrading possible
HA35e-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible
HA35e-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated removal of connector chain interlinks, limited upgrading possible
HA35f
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, individual upgrading possible
HA35f-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated cable color detection, individual upgrading possible
HA35f-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection and keying cutting, individual upgrading possible
HA35f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting, keying testing and high-voltage test, individual upgrading possible
HA35f-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for keying cutting, individual upgrading possible
HA35f-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for keying cutting and keying testing, individual upgrading possible
HA35f-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for removal of connector chain interlinks, individual upgrading possible
HA35f-RK-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks and cable color detection, individual upgrading possible
HA35f-RK-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, individual upgrading possible
HA35f-RK-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-RK-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, fully eqipped with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, keying testing and high-voltage test
HA35f-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for high-voltage test, individual upgrading possible
HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines
VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
New
VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
New
VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
New
VARICON 7000-DC
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, for flexible harness configurations, machine to be adapted to the application's requirements
New
VARICON 7000-DC-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses combined with additional crimp contacts, for flexible harness configurations, machine to be adapted to the application's requirements
Approved Cables
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
03/2023