35
RAST 2.5 connectors, pitch 2.5/5.0 mm

RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of enhanced locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
Technical Data
Environmental conditions
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
Materials
Insulating body: PBT, V-0 according to UL94 – 3518-4 S03V...
PA, V-2 according to UL94 – 3518-4 M12S03V... *1
Contact spring: CuSn, tin-plated (Sn/Ag) – 3518-4 (M...)S03V03
CuSn, pre-nickel and gold-plated – 3518-4 (M...)S03V102
1) M12: component glow wire resistant (GWT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
Mechanical data
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 4,0 N *1
Withdrawal force/contact: ≥ 0,5 N *2
Retaining force/locking: ≥ 13,4 N *3
1) measured with a polished steel pin, nominal thickness 1.5 mm
2) measured with a polished steel pin, nominal thickness 1.5 mm
3) measured with a polished steel gauge, nominal thickness 1.5 mm
Connectable conductors for IDT area
Construction: discrete conductor, notched flat cable 2.5 mm
Section min.: 0,14 mm²
Section max.: 0,38 mm²
Insulation diameter: ≤ 1,6 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
Electrical data (at Tamb 20 °C)
Contact resistance: ≤ 5 mΩ
Rated current: 4 A (Tamb 60 °C)
2 A (Tamb 100 °C)
Rated voltage: 250 V AC
Harnessing Equipment

HZ35
Manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)

HZ-M35
Modular manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)

HZ35-K
Hand tongs for keying of pre-terminated RAST 2.5 connectors according to RAST 2.5 standard

KHP35
Knuckle-joint press for termination of RAST 2.5 connectors in insulation displacement technology (IDT)

HA35e
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine, limited upgrading possible

HA35e-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible

HA35e-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated removal of connector chain interlinks, limited upgrading possible

HA35e-DC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, machine to be adapted to the application's requirements

HA35f
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, individual upgrading possible

HA35f-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated cable color detection, individual upgrading possible

HA35f-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection and keying cutting, individual upgrading possible

HA35f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible

HA35f-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting, keying testing and high-voltage test, individual upgrading possible

HA35f-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for keying cutting, individual upgrading possible

HA35f-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for keying cutting and keying testing, individual upgrading possible

HA35f-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for removal of connector chain interlinks, individual upgrading possible

HA35f-RK-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks and cable color detection, individual upgrading possible

HA35f-RK-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, individual upgrading possible

HA35f-RK-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting and keying testing, individual upgrading possible

HA35f-RK-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, fully eqipped with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, keying testing and high-voltage test

HA35f-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for high-voltage test, individual upgrading possible

HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines

VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations

VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations

VARICON 7000-DC
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, for flexible harness configurations, machine to be adapted to the application's requirements

VARICON 7000-DC-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses combined with additional crimp contacts, for flexible harness configurations, machine to be adapted to the application's requirements
Approved Cables
Approved Cables for 3518-4 Download (PDF)
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3518-4 | 0,14 | 7 x Ø 0,16 mm | 6 ± 0,5 | Sn | 1.25 | Silicone | -50/+180 | Leoni Silitherm | ST0101§ | SIF AWG 26 (0,14) |
3518-4 | 0,14 | 7 x Ø 0,16 mm | 11–13 | Sn | 1 | NHFR | 105 | LTK | E148000 | UL10368 - 26AWG |
3518-4 | 0,14 | 7 x Ø 0,16 | 8,7 | Sn | 1,28 | PVC | +80 (UL)/+90 (CSA) | Sumitomo | CSA Type TR-64 FT1 Sumitomo-x (x= sz, y= m) | AWM1007 LF CSA TR-64 |
3518-4 | 0,17 | 7 x Ø 0,185 mm max. | 12 | - | 1,10 - 0,1 | PVC | -40/+105 | Gebauer & Griller | 120994 | FLCuAg01RY 0,17-A/T105 |
3518-4 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012788A | AWG 24 |
3518-4 | 0,2 | 1 x Ø 0,50 mmribbon cable | Sn | 1,35 ± 0,1 | PVC | +90 | Ernst & Engbring | 115506040173 | FL-5YV 2, 10 x Ø 0,5 mm² | |
3518-4 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 | 0,20 | 1 x Ø 0,50 mm | - | 1,00 ± 0,05 | PVC | -40/+105 | Berne | 704 VU 04 08 RA | Câble Rigide 4 x 0,2 mm² | |
3518-4 | 0,21 | 12 x Ø 0,15 mm ± 0,005 | 8 ± 1,6 | Sn | 1.4 | PVC | 105 | Başoğlu | BC-PVC AWG 24 | UL 1569, AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,2 ± 0,1 | PVC | +105 | Leoni | 76783002K | FLRY 0,22 -A |
3518-4 | 0,22 | 7 x Ø 0,202 mm | 9 | Sn | 0,25 | TPE-S | -40/+125 | Leoni | 88A00007 | LI31xy |
3518-4 | 0,22 | 7 x 0,20 mm ribbon cable | < 18 | Sn | 1,35 ± 0,05 | PVC | -30/+105 | Klasing | 2,5 FL-LiYV 7 x 0,22 mm² ZG, STL 902 06 | 7 x 0,22 mm², grau |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 8,5 | Ag | 1,12 | PFA | +200 | Habia | 548xx2407 | H-A 2407 |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 8,9 | Sn | 1,4 | PVC | +105 | Medi | 524703 ... | FBL LIY/ZGL x AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | ≤ 13 | Sn | 1.25 | PVC | -40/+80 | Sterner | 1000000513 | KS-LiYY 7x0,22qmm |
3518-4 | 0,22 | 7 x Ø 0,2 mm | 11 | Sn | 1,45 ± 0,05 | PVC | -25/+105 | KBE | 4100242110200K | AWG 24 |
3518-4 | 0,22 | 7 x 0,203 mm | 18 | Sn | 1,5 ± 0,1 | PVC | -5/+80 | Helukabel | 620xx | LiY 1 x AWG24 |
3518-4 | 0,22 | 7 x Ø 0,20 | 9 | Sn | 1,0-1,2 | PVC | -40/+120 | Omerin | Q 0108 Indice A, Variante 04 | 0,22mm² AWG24 |
3518-4 | 0,22 | 7 x 0,203 mm | 23 | Sn | 1,2 ± 0,05 | PVC | -30/+80 | Medi | 613240411 | UL/ cUL LiYY 4 x AWG24 grau |
3518-4 | 0,22 | 7 x 0,202 mm | 9 | - | 1,2 ± 0,05 | PVC | -40/+105 | Leoni | 83000002Q | LiYYW 2x0,22 BL |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,4+0,05/-0,1 | PVC | +105 | Monette | 19.312X | 2,5FL - LiYV |
3518-4 | 0,22 | 7 x Ø 0,20 ± 0,006 | 8-9 | Sn | 1,30 ± 0,05 | FEP | 200 | Rishun | RS201408030 | UL AWM 1332 AWG24 |
3518-4 | 0,22 | 7 x Ø 0,193 mm | 13.6 | Sn | 1,55 ± 0,1 | PVC | -10/+105 | Vercavi | HJ1X24----S0 | 1xAWG24 Style 1007/ 1569 |
3518-4 | 0,22 | 7 x Ø 0,21 | 9 | Sn | 1,4 ± 0,10 | PVC | -40/+105 | Leoni | 89460080# | LiYW 0,22 SN AWG 24/ 7 |
3518-4 | 0,22 | 7 x Ø 0,22 mm | 8,6 | Sn | 1,1 ± 0,1 | PVC | UL +80CSA +90 | Leoni | 89440080A | LiYW 0,22 Sn AWG 24/7 SKT |
3518-4 | 0,22 | 7x Ø 0,202 mm | 9 | Sn | 1,4 ± 0,1 | PVC lead-free | -30/+105 | Leoni | 89460080A | LIYW 0,22 mm² SN AWG 24/7 UL 1569 CSA T1 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 9 | Sn | 1,52 ± 0,02 | PVC | +80 | Belden-EIW | BG 6060 | LiY 0,22 mm² |
3518-4 | 0,22 | 19 x Ø 0,13 | < 17 | Sn | 1,45 ± 0,1 | PVC | -30/+105 | Amokabel | 1608 | AWG 24 UL1569 FT Slits |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 35 | Sn | 1 | Silicone | +200 | Omerin | G1009005 | SONDIX MC-CNPFA |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 9,4 | Sn | 1,40 | PVC | +105 | Viakon | OW 76 | 24 AWG AWM Style 1007/1569 105C |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,42 | PVC | +105 | Hamlin | 32743-581216100. | UL1569/24AWG WIRE |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,4+0,05/-0,1 | PVC | +70 | Monette | 19.302X | 2,5FL - LiYV |
3518-4 | 0,22 | 7 x Ø 0,16 mm | 18 | Sn | 1,45 ± 0,05 | PVC | +90 | Pan | UL 1007 Hook-Up Wire | UL 1007 AWG 24 STR 11/0,160 |
3518-4 | 0,22 | 7 x Ø 0,202 mm | 9 | - | 1,15 ± 0,05 | TPE | -5/+125 | Leoni | 88260330# | LI31Y 1x0,22 BL SKT 1,15 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 7,7 | - | 1,12 ± 0,01 | FEP | +180 | HEW/CDT | 2669 | HEW-FEP-TE Cu vz AWG24 |
3518-4 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 16 ± 1,6 | - | 1,4 ± 0,05 | PVC | -5/+90 | Jiangsu Jiangyang | LiYW 0,22 mm² | LiYW 0,22 mm² |
3518-4 | 0,22 | 11 x Ø 0,16 mm ± 0,004 | 8,7 ± 0,87 | Sn | 1,45 ± 0,1 | PVC | 80 | Jiangsu Jiangyang | UL 1007 24AWG | AWM 1007 AWG 24 |
3518-4 | 0,22 | 19 x Ø 0,127 mm | 7 | Sn | 0,96 | PTFE | +180 | HEW | 18880 | HEW-PTFE/ Silikonltg./ TEHSI-Cu vn 2xAWG24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,3 ± 0,1 | TPE | +125 | HEW/CDT | 26613 | HEW-TPE-E-Y Cu vz 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,2 mm | 9 | - | 1,15 ± 0,05 | TPE | -30/+125 | Omerin | Q0507001 | Plastherm 41 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,1 ± 0,05 | FEP | +180 | Monette | 56754 | Li6YV 0,22 mm² |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 18 | Sn | 1,3 ± 0,05 | FEP | +180 | Monette | 60412 | Li6Y 0,22 mm² |
3518-4 | 0,22 | 11 x Ø 0,16 mm | 18 | - | 1,45 ± 0,05 | PVC | 105 | Guru Amardass | UL 1569#24 | UL 1569 AWG 19/ 24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 12,7 | - | 1,4 | PVC | +105 | Cable Tech | 702899 | AWG 24/ UL 1569/1007 |
3518-4 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 1,43 ± 0,05 | PVC | 80 | LTK | E14800 | UL 1007 AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,2 mm ± 0,005 | 10 ± 3 | - | 1,20 ± 0,1 | FEP | 180 | Mysun | VDE8207 | 24 AWG |
3518-4 | 0,22 | 7 x Ø 0,20 mm | 15 | Sn | 1,5 ± 0,05 | PVC | +105 (UL)/+80 (CSA)/+90 | Medi | 120247 ... | |
3518-4 | 0,22 | 11 x Ø 0,16 mm | 10.3 | Sn | 1.42 | PVC | 80 | Sumitomo | E41105 | UL 1007 AWG 24 |
3518-4 | 0,22 | 7 x Ø 0,20 mm ribbon cable | 18 | Sn | 1,35 ± 0,05 | PVC | +105 | Klasing | 50154xx | |
3518-4 | 0,23 | 7 x Ø 0,203 mm | 7,7 ± 0,77 | - | 1,26–1,41 | PTFE | -190/+200 | HEW | VE15757 | AWG 24 UL-Style 1180 |
3518-4 | 0,23 | 7 x Ø 0,203 mm | < 8,9 | Sn | 1,50 ± 0,10 | PVC | -10/+80 | Medi | 120247xy | UL/ cUL 1007/ 1569 AWG 24 |
3518-4 | 0,23 | 7 x Ø 0,203 mm | 8.5 | Ag | 1,35 ± 0,05 | FP-PTFE | -190/+200 | Leoni | 13993 | Fp AWG 24 (7sp) |
3518-4 | 0,23 | 7 x Ø 0,203 mm | ≤ 8,90 | Sn | 1.2 | SR-PVC | -10/+105 | Klasing | 6019430 | Y-J-UL 2517, 0,23mm² |
3518-4 | 0,23 | 7 x Ø 0,203 mm | ca. 7,7 | Ag | 1,26-1,42 | PTFE | -190/+150 | HEW | VE10503 | PTFE AWG 24/7, UL 1164 |
3518-4 | 0,23 | 7 x Ø 0,203 mm ribbon cable | 16 | Sn | 1,35 ± 0,05 | PVC | +105 | Klasing | 50253xx | FL-ZGL XXx0,23 1,35 R2,5 |
3518-4 | 0,23 | 11 x Ø 0,16 mm ribbon cable | 16 | Sn | 1,4 ± 0,1 | PVC | 105 | LTK | SK-2651-202 | PVC-isolierte Flachbandleitung 24 AWG |
3518-4 | 0,24 | 19 x Ø 0,127 mm | 7 ± 0,7 | Ni | 1,19 ± 0,08 | PTFE | -190/+250 | HEW | VE13951 | AWG 24 |
3518-4 | 0,25 | 32 x Ø 0,11 mm | - | 1,2 - 1,3 | PVC | -40/+105 | NKT | AP240502 | FLRY-B 0,25 mm² | |
3518-4 | 0,25 | 14 x Ø 0,15 | 16,62 | - | 1,30 ± 0,05 | PVC | -15/+70 | Arvo | 0040022P | LiYY 2 x 0,25mm² |
3518-4 | 0,25 | 7 x Ø 0,21 mm | 25 | - | 1,35 ± 0,05 | PVC | -10/+90 | IRCE | 41VI01000250087K-27K-J7K | S03V2-R 1 x 0,25 mm² |
3518-4 | 0,25 | 7 x Ø 0,22 mm | 11 ± 2 | Sn | 1.15 | FEP | -90/+180 | Omerin | Siliflon E6YS, 0,25mm² | 0,25mm² |
3518-4 | 0,25 | 7 x Ø 0,208 mm | 10 | - | 1,45 ± 0,03 | PVC | -5/+70 | Leoni | 8800001CA | LiY 1x0,25 SN |
3518-4 | 0,25 | 7 x Ø 0,208 mm | 10 | - | 1,45 ± 0,03 | PVC | -5/+90 | Leoni | 8800001DA | LiYW 1x0,25SN |
3518-4 | 0,25 | 19 x Ø 0,13 mm | 9.5 | Sn | 1,45 ± 0,05 | Polyolefin | -55/+155 | Huber & Suhner | 12583896 - Red | RADOX 155 0,25 mm² |
3518-4 | 0,25 | 14 x Ø 0,15 | 60 | - | 1,3 | PVC | -5/+70 | Bruns | 311002502 | LiYCY 2x0,25 |
3518-4 | 0,25 | 14 x Ø 0,15 mm | 16,6 | - | 1,50 ± 0,1 | PVC | -30/+80 | Klasing | 6100022 | LiYY 4 x 0,25mm² |
3518-4 | 0,25 | 7 x Ø 0,21 mm | 11,1 | - | 1,23 | PVC | +70 | Pirelli, Turkey | 79947 | 05V-K 0,25 300/500 V |
3518-4 | 0,25 | 14 x Ø 0,15 mm | 24 | - | 1,3 | Special PVC | +80 | Helukabel | 18010 | LiYY 6x0,25QMM/ 18033 500V |
3518-4 | 0,25 | 14 x Ø 0,15 mm | 16,62 | - | 1,50 ± 0,08 | PVC | -5/+70 | Arvo | 0040004S | LiYY 4 x 0,25mm² |
3518-4 | 0,25 | 14 x Ø 0,15 | 12,4 | Sn | 1,55 ± 0,1 | Polyolefin copolymer | -55/+155 | Leoni-Studer | 190155 | BETAtherm 155 |
3518-4 | 0,25 | 19 x Ø 0,127 mm | 8,2 | Ni | 1,16 ± 0,10 | PTFE | +260 | L. Jung | 0231 0090 - 20 | Tefloneinzelader/ AWG24/19 NPC 5Y |
3518-4 | 0,25 | 14 x Ø 0,150 mm | 16,62 | - | 1,5 ± 0,05 | PVC | +105 | Arvo | 00440026 | LiYwYw 4 x 0,25 mm² |
3518-4 | 0,25 | 7 x Ø 0,22 mm | 11 | Sn | 1,25 ± 0,10 | FEP | +180 | Omerin | D0108022 | Silifon E6YS 0,25mm² |
3518-4 | 0,34 | 42 x Ø 0,10 mm ± 0,007 | 15 ± 3 | - | 1,30 ± 0,05 | PP | -40/+80 | Wenchang | Style 20549 | AWG 22 |
3518-4 | 0,34 | 7 x Ø 0,25 | 12,6 | Sn | 1,35 | PTFE | +180 | Habia | 700022246 | AWG22 |
3518-4 | 0,34 | 19 x Ø 0,15 mm | < 15 | Sn | 1,55 + 0,03 | PVC lead-free | +105 | Alstermo | 1341 | PVC-AWG23 Style1569 Litze |
3518-4 | 0,34 | 7 x Ø 0,25 +/- 0,008 | 15 +/- 1,5 | - | 1,5 ± 0,05 | PVC | -40/+105 | Jiangyang | LiYY 2 x 0,34 mm² | 0,34mm² |
3518-4 | 0,34 | 7 x Ø 0,254 +/- 0,007 | 13-15 | - | 1,4-1,6 | PVC | -40/+105 | Rishun | LiYY 2 x 0,34mm² | 0,34mm² |
3518-4 | 0,34 | 42 x Ø 0,10 mm | 11–18 | - | 1,5 ± 0,05 | TPE | -25/+80 | WenChang | 173585 | Li9Y11Y 5x0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,25 | 14 | Sn | 1,2-1,45 | PVC | -40/+105 | Omerin | Q 0108 Indice A, Variante 05 | 0,34mm² AWG22 |
3518-4 | 0,34 | 7 x Ø 0,25 mm | 15 ± 3 | - | 1,50 ± 0,1 | PVC | -40/+105 | Epcos | P-046-CA-004 | LiYY 2 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø AWG 30 | 44.2 | - | 1.27 | PVC | -20/+80 | Alphawire | 1174C | 22 AWG |
3518-4 | 0,34 | 42 x Ø 0,10 mm | 11–18 | - | 1,30 ± 0,05 | PP | -40/+80 | WenChang | TCA_GC-CC-1412 | Li9Y11Y 4x0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,25 mm | ≤ 13 | Sn | 1,25 ± 0,05 | PVC | -25/+105 | Sterner | 061E000047 | KS-LiYv-T 1x0,34 qmm |
3518-4 | 0,34 | 17 x Ø 0,16 mm ± 0,008 | 18 ± 2 | Sn | 1,58 ± 0,05 | PVC | -40/+80 | BizLink Changzhou | 10.097.xxxYYYYY | UL 1007 AWG 22 |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 8 | Sn | 1,40 ± 0,10 | XLPO | 120 | Başoğlu | Li32Y 0,34 mm² | Li32Y 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034046901ZN | Li31YYW 4 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 16 ± 2 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 730034036901ZN | Li31YYW 3 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034066901ZN | Li31YYW 6 x 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,25 mm | 12 | - | 1,3 ± 0,05 | TPE | -30/+125 | Omerin | Q0507002 | Plastherm 41 0,34 mm² |
3518-4 | 0,34 | 7 x Ø 0,25 mm | 14 ± 4 | Sn | 1.35 | FEP | -90/+205 | Omerin | D0108029 | SILIFLON E6YS 0,34 mm² |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 140 ± 15 | - | 1.55 | PVC | 105 | Salcavi | X40349 | LiYYW 4x0,35 |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,10 | ETFE | +150 | HEW | 2838 | HEW-ETFE Aderltg. Vz AWG 22 |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11575 | |
3518-4 | 0,35 | 11 x Ø 0,20 mm ± 0,005 | 14 ± 2,8 | Sn | 1.6 | PVC | 105 | Başoğlu | BC-PVC AWG 22 | UL 1569, AWG 22 |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 8,5 ± 0,85 | Ag | 1,3 ± 0,1 | TE-100 | -190/+200 | HEW | 3607 | PTFE Litze AWG 22 |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 1,35 ± 0,05 | PFA | -60/+180 | Industria Cavel | PF22CSK# | AWG 22 |
3518-4 | 0,35 | 12 x Ø 0,21 mm | 16 | - | 1,4 +0/-0,2 | PVC | -40/+105 | Finolex | 911012312 | FLRY-B |
3518-4 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 16 | - | 1,58 +0,02/-0,03 | PVC | -25/+105 | KBE | 4100220100194K | UL 22 AWG AWM Stylle 1569 |
3518-4 | 0,35 | 7 x Ø 0,25 mm | 15 | Sn | 1,35 ± 0,05 | PFA | -90/+260 | Sipro | SiPFA 0,35 mm² CUSN | SiPFA |
3518-4 | 0,35 | 7 x Ø 0,236 mm | 19 | - | 1.45 | PVC | ≤ +70 | Deka | 2050110313 | LiY/ H05V-K 0,35 mm² |
3518-4 | 0,35 | 7 x Ø 0,245 mm | 13 | Sn | 1,30 ± 0,05 | PVC | -30/+80 | Medi | 122227 | AWG 22 |
3518-4 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 -0,2 | PVC | -40/+105 | KBE | 1000350110195A | FLRY 0,35 mm² |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 8,3 | - | 1,45 ± 0,05 | PVC | +105 | Klasing | 5009484 | FL-ZGL 5 x 0,35/1,45 R5,00 |
3518-4 | 0,35 | 7 x Ø 0,26 mm | 15 | - | 1,45 | PVC | +90 | Ege | 064401XX (90 °C) | |
3518-4 | 0,35 | 12 x Ø 0,194 mm | 15 | Sn | 1,57 ± 0,05 | PVC | -40/+105 | KBE | 4100224010194K | AWG 22 UL/ AWM-Style 1569/ 1007 |
3518-4 | 0,35 | 7 x Ø 0,26 mm | 15 | - | 1,45 | PVC | +70 | Ege | 064401XX (70 °C) | |
3518-4 | 0,35 | 7 x Ø 0,243 mm | 20 ± 2 | Sn | 1,45 ± 0,05 | PVC | -20/+90 | Salcavi | R1xxxx | FR7 S 1 x 0,35mm² |
3518-4 | 0,35 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730857 | LIY 1x0,35 BL 1,4mm |
3518-4 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35-1,90 | PVC | +105 | Deka | E50085 | H05V-K |
3518-4 | 0,35 | 17 x Ø 0,16 mm | ≤ 18 | Sn | 1,58 ± 0,10 | PVC | 105 | Xingda | 156922BC | AWG 22 |
3518-4 | 0,35 | 12 x Ø 0,193 mm | 20.3 | Sn | 1,60 ± 0,1 | PVC | -15/+105 | Vercavi | HJ1x22---S1 | AWG 22 UL 1569 |
3518-4 | 0,35 | 19 x Ø 0,16 | 10 | Sn | 1,25 ± 0,03 | FEP/FEP | -100/+180 | Coroplast | 18-1153 | LI6Y6Y 0,35mm² |
3518-4 | 0,35 | 12 x Ø 0,21 | 23 +/- 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YBSN0035 | FLRY-B 0,35sn |
3518-4 | 0,35 | 7 x Ø 0,26 | 15 | Sn | 1,35 | PVC | +105 | C.E.Cam. | V2035135PCS | AWG22 |
3518-4 | 0,35 | 12 x Ø 0,19 mm | 28 | Sn | 1,40 | PVC | +90 | IRCE | 2277 | S03V2-K 1X0,35 |
3518-4 | 0,35 | 12 x Ø 0,21 mm | - | 1,4 -0,2 | PP | -40/+125 | Leoni | 76860009K | Mocar 125 P 0.35-B | |
3518-4 | 0,35 | 12 x Ø 0,194 ± 0,006 mm | - | 1,4 ± 0,05 | PVC | -5/+70 | Jiangyang | LiY 0,35 | LiY 1x0,35 | |
3518-4 | 0,35 | 45 x Ø 0,11 mm | - | 1,3 - 0,1 | TPE-S | -40/+125 | Gebauer & Griller | K4260 | FLR31Y 0,35 mm² | |
3518-4 | 0,35 | 7 x Ø 0,26 mm | - | 1,25 - 1,40 | PVC | -40/+100 | Coficab | IRT200358000 | IRT2 | |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 32 | Sn | 1,6 ± 0,10 | XLPE | 150 | Baohing | C1307832 | AWG 22 |
3518-4 | 0,35 | 7 x Ø 0,254 | 8 +/- 3 | Sn | 1,35 ± 0,08 | PFA | +250 | Haerkn | HK20130924002E | AWG22 |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R10789 | |
3518-4 | 0,35 | 7 x Ø 0,25 mm | - | 1,2 - 1,3 | PP | -40/+125 | Coficab | 9YA00358000S | FLR9Y-A | |
3518-4 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,1 | PVC TI 2 | -30/+60 | Leoni | 83013161A | S03VV-F 2x0,35/7 BL 4,4 SKT | |
3518-4 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64240615B | L03VV-F 6x0,35 BL | |
3518-4 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64210515# | S03VV-F 4x0,35BL SKT 4,9mm | |
3518-4 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11529 | |
3518-4 | 0,35 | 12 x max. Ø 0,21 mm | 28 | - | 1,301,50 | PVC | -30/+90 | Manex | LiYW 0,35 N | LiYW |
3518-4 | 0,35 | 7 x Ø 0,254 mm | 16 ± 2 | Sn | 1,4 ± 0,1 | PVC | +5/+70 | Salcavi | X65275 | LiYCY |
3518-4 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35 ± 1,90 | PVC | +105 | Deka | E50086 | H05V-K |
3518-4 | 0,35 | 7 x Ø 0,254 | 15 +/- 3 | Sn | 1,35 ± 0,08 | PVC | +105 | Haerkn | HK20130924001E | AWG22 |
3518-4 | 0,35 | 7 x Ø 0,25 mm | 27 | - | 1,25 ± 0,05 | PVC | -40/+105 | Coficab | YA00358000S | FLRY-A |
3518-4 | 0,35 | 7 x Ø 0,245 | 17 +/- 1,7 | Sn | 1,4 ± 0,05 | PVC | -15/+70 | Vercavi | HP 1035----S5 | FR2 1 x 0,35mm² |
3518-4 | 0,35 | 11 x 0,21 mm | 42 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+105 | C.E.Cam. | HT035145 | 1x0,35mm² |
3518-4 | 0,35 | 7 x Ø 0,26 | 20,4 | - | 1,25 ± 0,05 | PE | -40/+150 | Acome | T6510 A4F LH A 0.35mm² | 0,35 mm² (AWG22) |
3518-4 | 0,35 | 7 x Ø 0,25 | 13 | Sn | 1,35 | PFA | +180 | Sami | Q0TA3BPGxx | AWG22 |
3518-4 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 ± 0,05 | PVC | -40/+105 | Leoni | 83000002_ | LiYYW _ x 0,35 BL |
3518-4 | 0,35 | 12 x Ø 0,193 | 16,8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22----S1 | AWG22 |
3518-4 | 0,35 | 7 x Ø 0,254 | 6,5 | Ag | 1,30 ± 0,10 | PTFE | -190/+200 | Leoni | 26168 | Fp AWG22(7sp) 600V |
3518-4 | 0,36 | 7 x Ø 0,254 mm | 8.5 | Ag | 1,17–1,37 | PTFE | -190/+105 | HEW | 45407 | AWG 22 |
3518-4 | 0,36 | 7 x Ø 0,254 mm | 15 | Sn | 1,65 ± 0,10 | PVC | -10/+80 | Medi | 120227xy | UL/ cUL 1007/ 1569 AWG 22 |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 | - | 1,4 ±0,05 | PVC | -15/+70 | KBE | 5000380120198E | LiY 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 16,5 | - | 1,6 ± 0,2 | PVC lead-free | +105 | Gebauer & Griller | 78303 | FLY 0,38-B |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,35 + 0,1 | PVC | +105 | Cablena | 40002 | LiY 0,38 mm2 |
3518-4 | 0,38 | 12 x Ø 0,203 mm | 14,4 ± 10 % | Sn | 1,35 ± 0,05 | TETE-302 | -100/+180 | HEW | 23069 | TETE 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,2 mm | 15 ± 1,5 | - | 1,45 ± 0,15 | PVC | -15/+105 | Cablena | 63.202.001.A | SLiYY 2 x 0,38 |
3518-4 | 0,38 | 12 x Ø 0,194 ± 0,006 mm | 15 | - | 1,40 ± 0,05 | PVC | +5/+70 | Leoni | 88200132Z | LiY 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+105 | Leoni | 88200130 | LIYW |
3518-4 | 0,38 | 19 x Ø 0,16 mm | 8,4 | Sn | 1,911,99 | TE-302 | +150 | HEW | 36247 | HEW-FEP-Aderleitung |
3518-4 | 0,38 | 12 x Ø 0,20 mm | 24,3 | - | 1,35-1,45 | PVC | -30/+90 | Leoni | 88730856# | LIYW 1x0,38 |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,1 | PVC | +90 | KWL | 605103.96 | LiYW 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 16 | - | 0.9 | PVC | -15/+90 | KBE | 5000380120198T | LiYW 0,38 mm² |
3518-4 | 0,38 | 7 x Ø 0,254 mm | 10–18 | Sn | 1,55 ± 0,05 | PVC | +80 | Baohing | ULSBH-254T/3-MZ-A | AWG 22 |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC lead-free | +105 | Leoni, Poland | 88200130M | LiYW 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 | Sn | 1,58 + 0,02/-0,03 | PVC lead-free | +105 | Leoni, Mexico | 89170842A | LIYW 0,38 Sn AWG 22/12 UL1569 CSA T1 |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 21/21,6 | - | 1,4 ± 0,05 | VPE | +110 | Kromberg & Schubert | 352118 | FLR2X 0,38 mm²-B |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,58 ± 0,02 | PVC | -10/+105 | Leoni | 89170840A | LiYW 0,38 BL (AWG 22/ 12) |
3518-4 | 0,38 | 19 x Ø 0,161 mm | ca. 8,4 | Ag | 1.3 | PTFE | -190/+200 | HEW | VE14182 | HEW-PTFE 2xAWG 22 |
3518-4 | 0,38 | 12 x Ø 0,20 mm | 15 ± 1,5 | - | 1,45 ± 0,15 | PVC | -40/+70 | Cablena | 8268 | 2x0,38 mm² LiYY |
3518-4 | 0,38 | 7 x Ø 0,254 mm | 16 ± 4,8 | Sn | 1,3 ± 0,05 | PVC | -10/+105 | Klasing | 6004278 | AWG 22 UL AWM Style 2517 |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730855 | LIY 1x0,38 BL 1,4mm |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -5/+70 | BizLink | 200378 | LiY 0,38 |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +90 | Leoni | 88730856 | LIYW 1x0,38 BL 1,4mm |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+105 | BizLink Changzhou | 20.0379.xxxYYYYY | LiYW 0,38 |
3518-4 | 0,38 | 12 x Ø 0,21 mm | 16 | - | 1,60 ± 0,20 | PVC lead-free | +110 | KBE | 1800380000195C | FLYW 0,38 mm² |
3518-4 | 0,38 | 12 x Ø 0,194 mm | 24 | - | 1,40 ± 0,1 | TPE | +110 | Leoni | 89300020A | LI2X 1X0,38/12/1,4 BL |
3518-4 | 0,38 | 12 x Ø 0,20 mm | 27 | - | 1,4 ± 0,1 | PVC lead-free | +70 | Leoni | 88730855A | LIY 1x0,38 BL 70°C |
3518-4 | 0,38 | 12 x Ø 0,21 | 24 | - | 1,4 ± 0,05 | XLPE | -30/+125 | Leoni | 89300020 | Li2X 1x0,38 |
3518-4 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 10 % | - | 1,40 ± 0,05 | PVC | -40/+70 | Cablena | 2336 | LIY 0,38 mm² |
3518-4 | 0,56 | 7 x Ø 0,33 mm | 15.4 | Ni | 1,69 ± 0,07 | PTFE | -40/+200 | Leoni | 8900001DA... | LI5Y AWG20/7 0,320NI |
Approved Cables for 3518-4 S01
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3518-4 S01 | 0,17 | 7 x Ø 0,185 mm max. | 12 | - | 1,10 - 0,1 | PVC | -40/+105 | Gebauer & Griller | 120994 | FLCuAg01RY 0,17-A/T105 |
3518-4 S01 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012788A | AWG 24 |
3518-4 S01 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 S01 | 0,22 | 7 x 0,203 mm | 18 | Sn | 1,5 ± 0,1 | PVC | -5/+80 | Helukabel | 620xx | LiY 1 x AWG24 |
3518-4 S01 | 0,22 | 7 x Ø 0,20 mm | 1517 | Sn | 1,50 ± 0,15 | PVC lead-free | +80 | Rishun | 10072401001-093 | PVC-Litze AWG 24 |
3518-4 S01 | 0,22 | 11 x Ø 0,16 mm | 1517 | Sn | 1,50 ± 0,15 | PVC lead-free | +80 | Rishun | 10072401002-093 | PVC bleifrei |
3518-4 S01 | 0,22 | 7 x Ø 0,21 mm | 8 | - | 1,45 ± 0,1 | Silicone | -60/+180 | Elettro Brescia | IDC-SIL 0,22 mm² | SIL 0,22 mm² |
3518-4 S01 | 0,22 | 7 x Ø 0,193 mm | 8 ± 2 | Sn | 1,5 | Silicone | -60/+180 | Elettrobrescia | 31910223G BI009 | Silicone 0,22 mm² |
3518-4 S01 | 0,22 | 11 x Ø 0,16 mm | 1113 | Sn | 1,43 | PVC | +80 | Xingda | 1007-24# | AWM E187208 XDXLGS 1007 VW-1 AWG 80°C |
3518-4 S01 | 0,23 | 7 x Ø 0,203 mm | ≤ 9 | Sn | 1.5 | PVC | -30/+105 | Klasing | 6047507 | Y - UL 2517, AWG 24 |
3518-4 S01 | 0,23 | 7 x Ø 0,203 mm | 7,7 ± 0,77 | Cu Ag | 1,26-1,41 | PTFE | -190/+200 | HEW CDT | 17851 | AWG 24 UL 1180 |
3518-4 S01 | 0,24 | 19 x Ø 0,133 mm | 8 ± 1 | - | 1,15 ± 0,05 | FEP | -5/+150 | KBE | 660024026000GX | Li6Y 2x0,24 120 Ohm |
3518-4 S01 | 0,24 | 19 x Ø 0,127 mm | 25 ± 3 | - | 1,03 ± 0,05 | FEP | -5/+150 | Leoni | LHTS: 39969 | Li6YB2G 2x0,24 BL (AWG24-19) |
3518-4 S01 | 0,25 | 19 x Ø 0,12 ± 0,005 mm | 11 ± 2 | Sn | 1,55 ± 0,05 | FEP | +200 | Shenjiang | SJSPRD817 | AWG 24 UL 1332 |
3518-4 S01 | 0,33 | 7 x Ø 0,24 mm | 20 | Sn | 1.6 | PVC | -5/+80 | Helukabel | 62101 | AWG 22 Einzelader |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 24 | Sn | 1,38 ± 0,05 | PVC | +105 | Gençler | 312710321520 | G05V2-K 0,35mm² |
3518-4 S01 | 0,34 | 17 x Ø 0,16 mm | 20 | Sn | 1,45 ± 0,05 | PVC | +80 | Pan | UL 1095 Hook-Up Wire | UL 1095 AWG 22 STR 17/0,160 |
3518-4 S01 | 0,34 | 7 x Ø 0,255 mm | 18 | - | 1,25 ± 0,1 | PVC | +70 | Kablo Elektro | MY 47003402 | LiYY 2X0,34mm2 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12 | Sn | 1,6 ± 0,1 | PVC | +105 | Medi | E34722 | UL/CSA Style 1007/1569 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 | 12,6 | Sn | 1,35 | PTFE | +180 | Habia | 700022246 | AWG22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14,3 | Sn | 1,6 ± 0,1 | PVC | +105 | Medi | E194781 | UL/CSA Style 1007/1569 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 15 | - | 1,5 ± 0,1 | PVC | +80 | Epcos | C61063-A2902-C061 | LIYY 2X0,34mm2 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 25 | - | 1,5 ± 0,1 | PVC | +80 | Epcos | C61063-A2902-C051 | LIYY 2X0,34mm2 |
3518-4 S01 | 0,34 | 7 x | ≤ 113 | - | 1,5 | PVC | -5/+70 | Lapp | 28404 | Unitronic LiYY 4 x 0,34 |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 10 | Sn | 1,40 ± 0,10 | Silicone | +180 | Coroplast | 9-1130 (VM 9-1125) | LI2G 0,34 mm²/ Shore Härte A80 |
3518-4 S01 | 0,34 | 19 x Ø 0,15 mm | < 15 | Sn | 1,55 + 0,03 | PVC lead-free | +105 | Alstermo | 1341 | PVC-AWG23 Style1569 Litze |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | - | 1,40 ± 0,10 | TPE SEBS 55 D | -40/+120 | KBE | 1500340110250S | LI 32Y 0,34 mm² |
3518-4 S01 | 0,34 | 7 x 0,254 mm | 21 | Sn | 1,6 +/- 0,1 | PVC | -5/+80 | Helukabel | 621xx | LiY 1 x 22AWG |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14 | Sn | 1,4 ± 0,1 | TPE | +120 | Coroplast | 8-0284 | LI31Y 0,34mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 70 | - | 1,50 ± 0,05 | PVC | 70 | Leoni | 83A00034A | LIYY 2x 0,34 bl |
3518-4 S01 | 0,34 | 17 x Ø 0,16 mm | 10 | Sn | 1,60 ± 0,08 | XLPE | -40/+150 | Leoni | 3398-22-017 | AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12–18 | - | 1,5 ± 0,07 | PVC | -40/+105 | Tri Wire | C61063A2902C090 | LiYY 2 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12–18 | - | 1,5 ± 0,07 | PVC | -40/+105 | Tri Wire | C61063A2902C093 | LiYY 2 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 8 | Sn | 1,40 ± 0,10 | XLPO | 120 | Başoğlu | Li32Y 0,34 mm² | Li32Y 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034066901ZN | Li31YYW 6 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,35 ± 0,05 | PVC | -15/+90 | KBE | 730034026901AJ | LiYWYW 2 x 0,34 mm² |
3518-4 S01 | 0,34 | 19 x Ø 0,15 mm | 18 ± 3 | Sn | 1,50 ± 0,05 | PVC | -20/+105 | Salcavi | X42650 | AWM Style 1569/ 1007 I A/B AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 16 ± 2 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 730034036901ZN | Li31YYW 3 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034046901ZN | Li31YYW 4 x 0,34 mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 12 | Sn | 1,35 ± 0,01 | PVC | +105 | Leoni | 88030761M | LiYW 0,35 mm² vz/SKT |
3518-4 S01 | 0,34 | 17 x Ø 0,16 mm | 17 | Sn | 1,5 ± 0,1 | PVC | +80 | Tongyuan | SP-H03VVH2-F/0.34-002 | H03VVH2-F/ 2X0,34mm² |
3518-4 S01 | 0,34 | 7 x Ø 0,254 mm | 18 | Sn | 1,25 ± 0,05 | PVC | +105 | Leoni | 76753011W | FLRY 0,35 SN-A |
3518-4 S01 | 0,34 | 7 x Ø 0,254 mm | 10,5 | Sn | 1,60 ± 0,05 | PVC lead-free | +105 | KBE | 4100220410245K | UL22AWG AWM Style 1569 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 18 | Sn | 1,35 ± 0,1 | PTFE | +180 | HEW | 12653 | Te-Cu vz/ AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 14,3 | - | 1,50 ± 0,05 | PVC plasticized | +70 | Arvo | 210006 | LIY 0,34 m2/7 |
3518-4 S01 | 0,34 | 7 x Ø 0,254 mm | 12 | Sn | 1,5 + 0,02 | Polyolefin | +125 | Nexans | 449169 | EPX125 FR 22/7 AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 12,7 | - | 1,6 | PVC | +105 | Cable Tech | 702895 | AWG 22/ UL 1569/1007 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | Sn | 1,6 ± 0,05 | PVC | +80 | Coroplast | 1498500 | LiYV 0,34 mm²/AWG 22 | |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | Sn | 1,6 ± 0,05 | PVC | +80 | Coroplast | 10-6002 | PVC-Aderleitung UR AWM 1007/CSA TR-64 22 AWG | |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 18 | Sn | 1,6 ± 0,01 | PVC | +150 | Coroplast | 10-7212 | LiYV 0,35 mm²/AWG 22 |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | 24 | Sn | 1,38 ± 0,05 | PVC | +105 | Gençler | 312710321521 | G05V2-K 0,35mm2 |
3518-4 S01 | 0,34 | 7 x Ø 0,243 mm | 19,05 | Sn | 1,5 ± 0,08 | PVC | +105 | Copperfield | 22021- | 22 7/.0096 TC AWM 1569 or 1007 TR64 or AWM I A/B |
3518-4 S01 | 0,34 | 7 x Ø 0,25 mm | ≤ 20 | Sn | 1,65 ± 0,10 | PVC | +105 | Flamar | 31A22ST01-XXX | PVC isolierte flexible Ltg |
3518-4 S01 | 0,34 | 7 x Ø 0,26 mm | 16 ± 2 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 730034036901ZN | Li31YYW 3 x 0,34 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 30 | Sn | 1,4 ± 0,05 | PVC | +70 | Italian Cable | CA240002F300 | CABLE 1X0,35/ 7X0,25 tinned |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 8,5 | Sn | 1,40 ± 0,10 | TPE-S | +125 | Leoni | 88260310 | LI31Y 0,35/7/ 1,4 MM SN |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 7,8 | Sn | 1,60 ± 0,10 | Special PVC | +105 | Medi | 120227 | UL Schaltlitze AWG 22 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 11 | Sn | 1,35 ± 0,05 | FEP | -55/+150 | Leoni | 89A00019 | LI6Y6Y 1x0,35 SN AWG22 |
3518-4 S01 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 ± 0,05 | PVC | -40/+105 | Leoni | 83000002_ | LiYYW _ x 0,35 BL |
3518-4 S01 | 0,35 | 7 x 0,241 mm | 15 | Sn | 1,35 ± 0,05 | PVC | 70 | Prysmian | 20149750 | LiY Sn 1 x 0,35mm² |
3518-4 S01 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 +/- 0,05 | PVC | -40/+105 | Leoni | 83000002N | LiYYW 2x0,35 BL |
3518-4 S01 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 -0,2 | PVC | -40/+105 | KBE | 1000350110195A | FLRY 0,35 mm² |
3518-4 S01 | 0,35 | 7 x 0,254 mm | 22 | - | 1,35 +/- 0,05 | PVC | -40/+105 | Leoni | 83000002P | LiYYW 4x0,35 BL |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 10 | Sn | 1,55 ± 0,1 | PVC lead-free | +105 | Leoni | 89460100A | LIYW -AWG22- UL1569-R100 |
3518-4 S01 | 0,35 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730857 | LIY 1x0,35 BL 1,4mm |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 30 | Sn | 1,35 ± 0,05 | PFA | -90/+260 | Yapitas | 8231 | FLON PFA-VDE |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 1,35 ± 0,05 | PFA | -60/+180 | Industria Cavel | PF22CSK# | AWG 22 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,40 ± 0,10 | PVC | -40/+70 | Cablena | 40.070.XXX | LiY 0,35-A Sn |
3518-4 S01 | 0,35 | 12 x Ø 0,193 mm | 20.3 | Sn | 1,60 ± 0,1 | PVC | -15/+105 | Vercavi | HJ1x22---S1 | AWG 22 UL 1569 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 11,5 | - | 1,25 ± 0,05 | Polyolefin | +150 | Huber + Suhner | 12567923 | Radox 155S RW |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 9,53 | Sn | 1,6 | PVC | +105 | Champlain | 1430 / 22107 | 22 7TC 105C 300V 1430 016 XLPVC CSA REW |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 8,3 | - | 1,45 ± 0,05 | PVC | +105 | Klasing | 5009484 | FL-ZGL 5 x 0,35/1,45 R5,00 |
3518-4 S01 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2 | Sn | 1,40 ± 0,20 | PVC | -5/+70 | Tele-Fonika | TT1-7266v3 | LiYc 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 15 | Sn | 1,35 ± 0,05 | PFA | -90/+260 | Sipro | SiPFA 0,35 mm² CUSN | SiPFA |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 15 ± 3 | - | 1,45 ± 0,1 | PVC | -40/+70 | Cablena | 40.028.300.2 | LiY 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 18 | Sn | 1,25 ± 0,1 | PVC | +105 | Coroplast | 1-5010 | LIYW 0,35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 | 13 | Sn | 1,35 | PFA | +180 | Sami | Q0TA3BPGxx | AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 11 | Sn | 1,57+ 0,1/- 0,05 | PVC | +105 | Quinro | 7-208 | |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 13,3 | Sn | 1,35 | PVC | +105 | Pirelli, Turkey | 84111 | FLRY (Sn) 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 13,3 | Sn | 1,35 | PVC | +70 | Pirelli, Turkey | 79716 | 05V-K (Sn) 0,35 300/500 V |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 14,4 | - | 1,5 | PVC lead-free | +90 | Leoni, Turkey | 68440 | LiYW 0,35 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 14,4 | - | 1,5 | PVC lead-free | +70 | Leoni, Turkey | 68436 | LiY 0,35 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,30 + 0,1 | PVC lead-free | +105 | Leoni | 66500 | FLRY-B (Sn) |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 10 | Sn | 1,35 ± 0,05 | PVC | +105 | Leoni | 88030761K | LiYW 1x0,35/ 7/1,35 Sn 105C |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,10 | ETFE | +150 | HEW | 2838 | HEW-ETFE Aderltg. Vz AWG 22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 | 15,2 | - | 1,65 ± 0,10 | PVC | -10/+105 | Klasing | 6016045 | 2xAWG22 UL-Style 2517/ 1569 |
3518-4 S01 | 0,35 | 7 x 0,243 mm | 20 ± 2 | Sn | 1,45 ± 0,05 | PVC | -20/+90 | Salcavi | R13636 | FR7 S 1 x 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +260 | Omerin | 150.15.01.00K | PFA 1x0,35 mm² |
3518-4 S01 | 0,35 | 12 x Ø 0,19 mm | 28 | Sn | 1,40 | PVC | +90 | IRCE | 2277 | S03V2-K 1X0,35 |
3518-4 S01 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35 ± 1,90 | PVC | +105 | Deka | E50086 | H05V-K |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +70 | Prysmian, Turkey | 2006-VS-70-035 | 05V-K 0.35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +90 | Prysmian, Turkey | 2006-VS-90-035 | 05V2-K 0.35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,244 mm | 19 | Sn | 1,35-1,90 | PVC | +105 | Deka | E50085 | H05V-K |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | Sn | 1,35 ± 0,05 | PTFE | +280 | Yapitas | Y26.0.0725.14 | FLON Li51Y |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 18 | Sn | 1,35 ± 0,1 | PVC | +60 | Leoni | 64210515A | L03VV-F 4X0,35/7 BL SKT |
3518-4 S01 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 ± 0,10 | PVC lead-free | +105 | Coroplast | 6-0111 | FLRY 0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 13 | Sn | 1,25 ± 0,05 | PVC | -40/+105 | Tele-Fonika | G-022076 | FLRY-A |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 16 | - | 1,35 ± 0,10 | PVC | +105 | Nursan | K04JG0 | 0,35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 20 | Sn | 1,45 ± 0,05 | PVC | +80 | Pan | H10957S22 | UL 1095 AWG 22/ STR 7x0,254 |
3518-4 S01 | 0,35 | 7 x Ø 0,255 mm | 20 | Sn | 1,6 ± 0,05 | PVC | +90 | Pan | H10077S22 | UL 1007 AWG 22/ STR 7x0,255 |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 17 | Sn | 1,25 | PVC | +90 | Nexans | FK 90 0,35 TINNED | H05V2-R 0,35 VZ (YJ6) |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 8,4 | Sn | 1,5 | FEP | +150 | Radix | FBA22T007 | FBA AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,04 | PTFE | +200 | Habia | 404-21033-040 | PTFE 0.35 Z |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,35 ± 0,05 | PTFE | +180 | Cet | 150.15.01.00R | PTFE 1X0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 | 8 +/- 3 | Sn | 1,35 ± 0,08 | PFA | +250 | Haerkn | HK20130924002E | AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 10 ± 2 | Sn | 1,05 ± 0,05 | PFA | -190/+260 | Salcavi | XF0547 | FR5P AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | - | 1,5 ± 0,1 | PVC | +90 | Baohing | FBSBH -204/3-SWR | H05V2-K 0,35mm² | |
3518-4 S01 | 0,35 | 7 x Ø 0,25 mm | 18 | Sn | 1,35 ± 0,05 | PVC | +60 | Leoni | 83013160A | S03VV-F2X0,35/ 7SN4,4SKT |
3518-4 S01 | 0,35 | 7 x Ø 0,254 | 15 +/- 3 | Sn | 1,35 ± 0,08 | PVC | +105 | Haerkn | HK20130924001E | AWG22 |
3518-4 S01 | 0,35 | 7 x Ø 0,26 | 15 | Sn | 1,35 | PVC | +105 | C.E.Cam. | V2035135PCS | AWG22 |
3518-4 S01 | 0,35 | 45 x Ø 0,1 mm4 conductors | - | 1,4 ± 0,05 | PVC YI 1 | -20/+80 | Leoni | 83200510# | LIFYY 4x0,35 BL 4,6mm | |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64210515# | S03VV-F 4x0,35BL SKT 4,9mm | |
3518-4 S01 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +180 | Cet | 150.15.01.00T | PFA 1x0,35 mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,35 +0,1/-0,05 | PVC | -10/+105 | Vercavi | HH1035----SF | FR 3/2 1 x 0.35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 12-26 | - | 1,5 ± 0,10 | PVC | 70 | Baohing | SWE-FBBH-169-H4WY | H05V-K 0,35mm² |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | Sn | 1,55 ± 0,05 | PVC | +80 | Lonsid | 100722002-11 | AWG 22 | |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 26 | - | 1,3 ± 0,10 | PVC | 90 | Baohing | C1112828 | FB S03V2-R |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | LHL 24" | Sn | 1,551,65 | PVC | +105 | Hubei Aerospace | CASC-10052517 | 1569 22AWG |
3518-4 S01 | 0,35 | 7 x Ø 0,254 mm | 17,78 | Sn | 1,6 | PVC | +105 | Baohing | C0303020 | UL 1569 22AWG |
3518-4 S01 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730855 | LIY 1x0,38 BL 1,4mm |
3518-4 S01 | 0,38 | 12 x Ø 0,20 mm | 27 | Sn | 1,5 ± 0,1 | PVC lead-free | +105 | Leoni | 88730872A | LIYW 1 x 0,38/0,2-S SN SKT |
3518-4 S01 | 0,38 | 12 x Ø 0,20 mm | 27 | Sn | 1,4 ± 0,1 | PVC | +160 | Leoni | 88030850A | LIY 0,38 mm² |
3518-4 S01 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +90 | Leoni | 88730856 | LIYW 1x0,38 BL 1,4mm |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm | 24 | - | 1,40 ± 0,1 | TPE | +110 | Leoni | 89300020A | LI2X 1X0,38/12/1,4 BL |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 | - | 1,4 ±0,05 | PVC | -15/+70 | KBE | 5000380120198E | LiY 0,38 mm² |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+105 | BizLink Changzhou | 20.0379.xxxYYYYY | LiYW 0,38 |
3518-4 S01 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | -40/+70 | BizLink Changzhou | 20.0378.xxxYYYYY | LiY 0,38 |
3518-4 S01 | 0,45 | 45 x Ø 0,10 mm | 21,6 | Sn | 1,55 + 0,10 | PVC | +105 | Leoni | 89170499A | LIFYW 0,35/0,1 SN AWG 22 |
Approved Cables for 3518-4 S02
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3518-4 S02 | 0,13 | 7 x Ø 0,16 | LHL 8" | Ag | 1,05-1,12 | FEP | +200 | Worldful | AF200 0.13-600 | AWG26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm ribbon cable | 8 | Sn | 1,00 ± 0,05 | PVC | -10/+80 | Medi | 122267 | UL/cUL Style 1061/10002 AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 36.3 | Sn | 1,02 ± 0,05 | PVC | -40/+105 | Kabeltronik | 95042609 | LiYY 4 x AWG 26/7 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 ± 0,008 mm | 8–9,5 | Sn | 1,20 ± 0,05 | XLPE | 125 | Rishun | RS201702028 | XLPE 26#TS/2F AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 12 | Sn | 1,30 ± 0,08 | PVC | +105 | LTK | SP-1569-021 | UL 1569 AWG 26 (7/0.16T) |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 11–13 | Sn | 1 | NHFR | 105 | LTK | E148000 | UL10368 - 26AWG |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | Sn | 1.3 | XL-PE | LTK | - | AWG 26 | ||
3518-4 S02 | 0,14 | 7 x Ø 0,158 mm | 12 | - | 1,05 -0,10 | PVC | -40/+105 | Leoni | 76693401# | FLCUAG01RY 0,13-A |
3518-4 S02 | 0,14 | 7 x Ø 0,16 | 7,8-9,5 | Sn | 1,08 | PET | +125 | Sumitomo | UL 3265-B28 AWG26 (7/ 0,16) | AWG 26 |
3518-4 S02 | 0,14 | 7 x 0,16 mm | 11-13 | Sn | 1,3 ± 0,08 | XLPE | 150 | Belden | B3398-607 | AWG 26 |
3518-4 S02 | 0,14 | 7 x 0,16 mm ribbon cable | 7.6 | Sn | 1,35 ± 0,05 | PVC | -30/+105 | Klasing | 5025206 | AWG 26 Style 2651 |
3518-4 S02 | 0,14 | 7 x 0,16 mm ribbon cable | 7.6 | Sn | 1,35 ± 0,05 | PVC | -20/+105 | JST | JFCR26L-06G250-036 | FastCon AWG 26 |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 9,6 | Sn | 1,3 | PVC lead-free | +80 (UL)/+90 (CSA) | Hitachi | SPE-00-1024 | UL1007-LF 26 AWG |
3518-4 S02 | 0,14 | 7 x Ø 0,16 mm | 7,4 | Sn | 0,95 | PVC lead-free | +80 | Hitachi | SP23-90742 | Semi-rigid PVC insulated wire, 1061 AWM LF, AWG 26 |
3518-4 S02 | 0,16 | 19 x Ø 0,102 mm | 8 | Sn | 1 ± 0,05 | PVC | -10/+105 | Medi | 122269 | AWG 26 |
3518-4 S02 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 S02 | 0,22 | 11 x Ø 0,16 mm | 13–15 | Sn | 1,41 ± 0,1 | PVC | 105 | 3F | UL 1569240_-11 | AWG 24 |
3518-4 S02 | 0,24 | 19 x Ø 0,127 mm | 25 ± 3 | - | 1,03 ± 0,05 | FEP | -5/+150 | Leoni | LHTS: 39969 | Li6YB2G 2x0,24 BL (AWG24-19) |
3518-4 S02 | 0,24 | 19 x Ø 0,133 mm | 8 ± 1 | - | 1,15 ± 0,05 | FEP | -5/+150 | KBE | 660024026000GX | Li6Y 2x0,24 120 Ohm |
3518-4 S02 | AWG 24 | 1 x Ø 0,51 mm | - | Sn | PE | -40/+105 | Sumida | Fxx-Pxxx-002 | Panta-Fix Jumper | |
3518-4 S02 | AWG 26 | 7 x Ø 0,16 mm | 6–8 | Ni | 1,15 ± 0,10 | FEP | 200 | Qifurui | UL 1332 AWG 26 00-black/01-white | UL 1332 AWG 26 00-black/01 white |
Approved Cables for 3518-4 S03
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3518-4 S03 | 7 x Ø 0,244 mm | 18 | Sn | 1,50–1,64 | PVC | -40/105 | Coficab | 1569SN22007xy | UL 1569 | |
3518-4 S03 | 0,14 | 7 x Ø 0,16 mm | 6 ± 0,5 | Sn | 1.25 | Silicone | -50/+180 | Leoni Silitherm | ST0101§ | SIF AWG 26 (0,14) |
3518-4 S03 | 0,17 | 7 x Ø 0,18 | 12 | - | 1,05 ± 0,05 | PVC | -40/+70 | Leoni | 88A00216# | LiY 1x0,17 BL CuAg |
3518-4 S03 | 0,17 | 7 x Ø 0,185 mm max. | 12 | - | 1,10 - 0,1 | PVC | -40/+105 | Gebauer & Griller | 120994 | FLCuAg01RY 0,17-A/T105 |
3518-4 S03 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012788A | AWG 24 |
3518-4 S03 | 0,2 | 19 x Ø 0,127 ± 0,008 | 10,65 ± 1 | Sn | 1,4 ± 0,10 | PVC | +105 | Interelectronix | IX2419012778A | AWG 24 |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm ± 0,004 | 8,7 ± 0,87 | Sn | 1,45 ± 0,1 | PVC | 80 | Jiangsu Jiangyang | UL 1007 24AWG | AWM 1007 AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 11 | Sn | 1,45 ± 0,05 | PVC | -25/+105 | KBE | 4100242110200K | AWG 24 |
3518-4 S03 | 0,22 | 12 x Ø 0,1 mm | 18 | Sn | 1,25 ± 0,10 | PVC | +80 | Leoni | 83200505A | LiYY 6X0,22/ 0,1/4,8 BL |
3518-4 S03 | 0,22 | 7 x Ø 0,193 mm | 13.6 | Sn | 1,55 ± 0,1 | PVC | -10/+105 | Vercavi | HJ1X24----S0 | 1xAWG24 Style 1007/ 1569 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 16 | Sn | 1.5 | PVC | +105 | BizLink | 10.0785.xxxYYYYY | UL 1569 AWG 24 |
3518-4 S03 | 0,22 | 19 x Ø 0,127 mm | 15 | Sn | 1,45 ± 0,05 | PVC | +105 | Leoni | 89170475M | LiYW 0,22SNAWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 9,4 | Sn | 1,40 | PVC | +105 | Viakon | OW 76 | 24 AWG AWM Style 1007/1569 105C |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm | 14/16 | Sn | 1,43 ± 0,05 | PVC | +105 | LTK | SK-1569-025 | AWM Style 1569 24 AWG |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 1,45 ± 0,05 | PVC | +90 | Pan | UL 1007 24# STR 11/0.160X1C | UL 1007 AWG 24 STR 11/1,160 |
3518-4 S03 | 0,22 | 7 x 0,21 mm | 27 | - | 1,10 - 1,20 | PP | -40/+125 | Coficab | 9YA00228000S | FLR9Y-A, 0,22mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm ± 0,008 | 0,5" | Sn | 1,0 ± 0,05 | PVC | -30/+80 | LZY | SP-1571/24-001 | AWM 1571 24 AWG |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm ± 0,005 | 10 ± 3 | - | 1,20 ± 0,1 | FEP | 180 | Mysun | VDE8207 | 24 AWG |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm | 15 | Sn | 0,330,38 | PVC | +105 | Eleteck | 0190082-A | AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | ≤ 20 | - | 1,2 -0,1 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,22-A/T125 | FLR9Y 0,22-A |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | ≤ 13 | Sn | 1,25 ± 0,07 | PVC | -20/+70 | Sterner | 1000000511 | LiYY 3 x 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,2 -0,1 | PVC | -40/+105 | Leoni | 76783002# | FLRY 0,22-A |
3518-4 S03 | 0,22 | 7 x Ø 0,21 | 9 | Sn | 1,4 ± 0,10 | PVC | -40/+105 | Leoni | 89460080# | LiYW 0,22 SN AWG 24/ 7 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 14–16 | - | 1,15 ± 0,05 | PVC | -40/+105 | Suzhou Cableplus | FLRY-A 0,22mm² | 0,22mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 8 | Ni | 1,4 | Silicone | 180 | Omerin | 0,22 mm² | Silicable 0,22 mm² Style 3367 |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 9 ± 0,2 | Sn | 1,4 ± 0,1 | Silicone | -40/+180 | Leoni/Silitherm | SIF 0,22 mm² | 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 9 ± 0,2 | Ni | 1,4 ± 0,1 | Silicone | -40/+180 | Leoni/Silitherm | AWM AWG24 Style 3367 | 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | 10 | - | ≤ 1,2 | PVC | -40/+100 | NKT | AP010002 | FLRY-A 0,22 mm² |
3518-4 S03 | 0,22 | 7 x Ø 0,20 ± 0,006 | 8-9 | Sn | 1,30 ± 0,05 | FEP | 200 | Rishun | RS201408030 | UL AWM 1332 AWG24 |
3518-4 S03 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,2 ± 0,1 | PVC | +105 | Leoni | 76783002K | FLRY 0,22 -A |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 8 | Sn | 1,30 ± 0,10 | FEP | +180 | Rei Hsing | UL1332 24 AWG | UL1332 Teflon Wire AWG 24 300V |
3518-4 S03 | 0,22 | 11 x Ø 0,16 mm ± 0,006 | 18 | Sn | 1,40 ± 0,08 | PVC | 80 | Zhengwei | BXBA2498 | AWG 24 |
3518-4 S03 | 0,22 | 19 x Ø 0,13 | < 17 | Sn | 1,45 ± 0,1 | PVC | -30/+105 | Amokabel | 1608 | AWG 24 UL1569 FT Slits |
3518-4 S03 | 0,22 | 7 x Ø 0,20 mm | 15 | Sn | 1,5 ± 0,05 | PVC | +105 (UL)/+80 (CSA)/+90 | Medi | 120247 ... | |
3518-4 S03 | 0,22 | 19 x Ø 0,127 mm | 7 | Sn | 0,96 | PTFE | +180 | HEW | 18880 | HEW-PTFE/ Silikonltg./ TEHSI-Cu vn 2xAWG24 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 14–20 | Sn | 1,2 ± 0,10 | PVC | -40/+80 | Cable-Net | UL2464 2C*24# 4.0MM WHE | AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,2 mm | 12 ± 2 | Sn | 1,2 ± 0,05 | FEP | -50/+200 | Yangtai | 02305017-TC | AWG 24 |
3518-4 S03 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 16 ± 1,6 | - | 1,4 ± 0,05 | PVC | -5/+90 | Jiangsu Jiangyang | LiYW 0,22 mm² | LiYW 0,22 mm² |
3518-4 S03 | 0,23 | 7 x Ø 0,203 mm | 8.5 | Ag | 1,35 ± 0,05 | FP-PTFE | -190/+200 | Leoni | 13993 | Fp AWG 24 (7sp) |
3518-4 S03 | 0,23 | 7 x Ø 0,203 mm | ≤ 8,90 | Sn | 1.2 | SR-PVC | -10/+105 | Klasing | 6019430 | Y-J-UL 2517, 0,23mm² |
3518-4 S03 | 0,23 | 7 x Ø 0,203 mm | ca. 7,7 | Ag | 1,26-1,42 | PTFE | -190/+150 | HEW | VE10503 | PTFE AWG 24/7, UL 1164 |
3518-4 S03 | 0,24 | 7 x Ø 0,21 mm | 17 | Sn | 1.3 | XPE | -40/+150 | Gebauer & Griller | FLR2X 0,22sn-A/T150-GG#127926 | FLR2x0,22 mm² |
3518-4 S03 | 0,24 | 19 x Ø 0,133 mm | 8 ± 1 | - | 1,15 ± 0,05 | FEP | -5/+150 | KBE | 660024026000GX | Li6Y 2x0,24 120 Ohm |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | ≤ 19 | - | 1,3 -0,1 | TPE-S | -40/+125 | Coroplast | 8-8500 | FLR31Y 0,25mm²/0,11 |
3518-4 S03 | 0,25 | 14 x Ø 0,15 mm | 13 ± 1,3 | - | 1,2–1,4 | PVC | 70 | Jiangsu Jiangyang | LiY 1 x 0,25 mm² | LiY 1 x 0,25 mm² |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | 16 ± 3 | - | 1,2 | TPE | +125 | Leoni | 88A00076 | LI31Y 1 x 0,25 mm² |
3518-4 S03 | 0,25 | 14 x Ø 0,15 | 16,62 | - | 1,30 ± 0,05 | PVC | -15/+70 | Arvo | 0040022P | LiYY 2 x 0,25mm² |
3518-4 S03 | 0,25 | 14 x Ø 0,15 | 60 | - | 1,3 | PVC | -5/+70 | Bruns | 311002502 | LiYCY 2x0,25 |
3518-4 S03 | 0,25 | 14 x Ø 0,150 mm | 60 | - | 1,25 ± 0,05 | PVC | -40/+105 | Arvo | 13305 | LiYwYw 4x0,25 sqmm |
3518-4 S03 | 0,25 | 19 x Ø 0,13 mm | 6 | - | 1,30 ± 0,10 | PFA | +180 | Omerin | D1410024 | Silifon Style 1726-CN51YS |
3518-4 S03 | 0,25 | 19 x Ø 0,127 mm | 8,2 | Ni | 1,16 ± 0,10 | PTFE | +260 | L. Jung | 0231 0090 - 20 | Tefloneinzelader/ AWG24/19 NPC 5Y |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | 12 | - | 1,30 ± 0,10 | PVC | +90 | Coroplast | 6-0324 (0,25/12)-A1 | FLRY 0,25mm² |
3518-4 S03 | 0,25 | 19 x Ø 0,12 ± 0,005 mm | 11 ± 2 | Sn | 1,55 ± 0,05 | FEP | +200 | Shenjiang | SJSPRD817 | AWG 24 UL 1332 |
3518-4 S03 | 0,25 | 7 x Ø 0,199 -0/+0,012 | 8-12 | - | 1,22-1,33 | PVC | -15/+90 | Prysmian | Protodur LiYW 0,25mm² | LiYW 0,25mm², Ince Izole 0,25 |
3518-4 S03 | 0,25 | 7 x Ø 0,199 -0/+0,012 | 8-12 | - | 1,42-1,48 | PVC | -15/+70 | Prysmian | Protodur LiY 0,25mm² | LiY 0,25mm², Kalm Izole 0,25 |
3518-4 S03 | 0,25 | 32 x Ø 0,11 mm | 16 | - | 1,30 ± 0,10 | PVC | +90 | Coroplast | 6-0324 (0,25/16)-A1 | FLRY 0,25mm² |
3518-4 S03 | 0,25 | 32 x Ø 0,10 mm | 17.6 | - | 1,27 ± 0,10 | PVC | -20/+105 | ByK | 0113025127400 | FLRY-B 0,25 mm² |
3518-4 S03 | 0,3 | 12 x Ø 0,18 mm | 7,5–9,0 | Sn | 1,6 ± 0,10 | Irradiated PE | 135 | Kurabe | PEX-F | 0.3 mm² |
3518-4 S03 | 0,3 | 7 x Ø 0,193 mm | 55 | - | 1,51 ± 0,05 | PVC lead-free | +70 | Condumax | NM 247-3 | Flex Cable 300V 0,30mm2 |
3518-4 S03 | 0,325 | 19 x 0,15 mm | 9.6 | Sn | 1.6 | Varpren | -30/+125 | Omerin | 37850104 | Varpren 125 UL, AWG 22 Style 3266 |
3518-4 S03 | 0,33 | 7 x Ø 0,24 mm | 20 | Sn | 1.6 | PVC | -5/+80 | Helukabel | 62101 | AWG 22 Einzelader |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | < 15 | Sn | 1,55 + 0,03 | PVC lead-free | +105 | Alstermo | 1341 | PVC-AWG23 Style1569 Litze |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 6,08–13,3 | Sn | 1,6 ± 0,1 | PVC | 105 | Taicheng | Taicheng AWG22 | UL 1569 AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 60 | Sn | 1,4 ± 0,1 | TPE SEBS | -40/+125 | KBE | 730034066901ZN | Li31YYW 6 x 0,34 mm² |
3518-4 S03 | 0,34 | 7 x 0,26 mm | 15 | Sn | 1,4 ± 0,1 | PVC | -40/+105 | KBE | 5000340110250A | LiY 0,34 mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 70 | - | 1,50 ± 0,05 | PVC | 70 | Leoni | 83A00034A | LIYY 2x 0,34 bl |
3518-4 S03 | 0,34 | 7 x Ø 0,254 +/- 0,007 | 13-15 | - | 1,4-1,6 | PVC | -40/+105 | Rishun | LiYY 2 x 0,34mm² | 0,34mm² |
3518-4 S03 | 0,34 | 17 x 0,16 mm | 18 | Sn | 1,58 ± 0,05 | PVC | 80 | Leoni | 10.097.999F5007 | AWG 22 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | ≤ 0,8" | Sn | 1.6 | PE | 125 | Furukawa | Beamex-ER470 | AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,25 +/- 0,008 | 15 +/- 1,5 | - | 1,5 ± 0,05 | PVC | -40/+105 | Jiangyang | LiYY 2 x 0,34 mm² | 0,34mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 15 | - | 1,40 ± 0,10 | TPE SEBS 55 D | -40/+120 | KBE | 1500340110250S | LI 32Y 0,34 mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | ≤ 13 | Sn | 1,25 ± 0,05 | PVC | -25/+105 | Sterner | 061E000047 | KS-LiYv-T 1x0,34 qmm |
3518-4 S03 | 0,34 | 7 x 0,25 mm | 18 | Sn | 1,6 ± 0,05 | PVC | 105 | IRCE | 41HG01000324087K | Style 1569 AWG 22 |
3518-4 S03 | 0,34 | 19 x 0,16 mm | 9.6 | Sn | 1.6 | Varpren | -50/+155 | Omerin | 37060102 | Varpren 155, 0,34 mm² |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 15 | Sn | 1,40 ± 0,10 | TPE SEBS | -40/+125 | KBE | 1500340119250Z | Li32Y 0,34 mm² verz |
3518-4 S03 | 0,34 | 7 x Ø 0,25 | 12,6 | Sn | 1,35 | PTFE | +180 | Habia | 700022246 | AWG22 |
3518-4 S03 | 0,34 | 7 x Ø 0,254 mm | 10,5 | Sn | 1,60 ± 0,05 | PVC lead-free | +105 | KBE | 4100220410245K | UL22AWG AWM Style 1569 |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | 14 | Sn | 1,60 ± 0,05 | PCV | -25/+105 | KBE | 4100230110130K | AWG 23 Style 1569 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | ≤ 20 | - | 1,60 ± 0,05 | PVC | +105 | Perennial | WL1569E02 | UL1569 22AWG (17/0,16 AS) |
3518-4 S03 | 0,34 | 7 x Ø 0,255 mm | 18 | - | 1,25 ± 0,1 | PVC | +70 | Kablo Elektro | MY 47003402 | LiYY 2X0,34mm2 |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | < 15 | - | 1,55 + 0,3 | PVC | +105 | Alstermo | 1569 105 | AWG 23/Style 1569 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 18 | Sn | 1,58 ± 0,05 | PVC | -10/+105 | BizLink | 10.0562.xxxYYYY | UL 1569 AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 13-15 | Sn | 1,55 | Polyolefin | -40/ +90 | Nexans | 2PJ983 | AWG 22 |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 16/19 | Sn | 1,58 + 0,05 | PVC | +105 | LTK | SK-1569-020 | AWM Style 1569 22 AWG |
3518-4 S03 | 0,34 | 19 x Ø 0,16 | 6,4-10,9 | Sn | 1,60 ± 0,10 | Polyolefin, cross-linked | -30/+120 | Medi | 137229M01 | AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,243 mm | 19,05 | Sn | 1,5 ± 0,08 | PVC | +105 | Copperfield | 22021- | 22 7/.0096 TC AWM 1569 or 1007 TR64 or AWM I A/B |
3518-4 S03 | 0,34 | 7 x Ø 0,254 | 10 +/- 3 | - | 1,5 ± 0,1 | PVC | -40/+105 | Leoni China | LC-10-0587 | LiYY 2 x 0.34 |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 14 | Sn | 1,4 ± 0,1 | TPE | +120 | Coroplast | 8-0284 | LI31Y 0,34mm² |
3518-4 S03 | 0,34 | 17 x Ø 0,16 mm | 20 | Sn | 1,56 ± 0,1 | PVC | 105 | 3F | UL 1569220_-17 | AWG 22, UL 1569 |
3518-4 S03 | 0,34 | 19 x Ø 0,15 mm | 18 ± 3 | Sn | 1,50 ± 0,05 | PVC | -20/+105 | Salcavi | X42650 | AWM Style 1569/ 1007 I A/B AWG 22 |
3518-4 S03 | 0,34 | 7 x Ø 0,25 mm | 17 ± 0,05 | - | 1,50 ± 0,05 | PVC | +105 | WanRong | WR10-01 | 2 x 0,34 mm² 300/300 V |
3518-4 S03 | 0,34 | 7 x Ø 0,26 mm | 10 | Sn | 1,40 ± 0,10 | Silicone | +180 | Coroplast | 9-1130 (VM 9-1125) | LI2G 0,34 mm²/ Shore Härte A80 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,20-1,30 | PVC | -40/+105 | Coficab | YBF00350540 | YBF |
3518-4 S03 | 0,35 | 7 x 0,26 mm | 22 | - | 1,2-1,3 | PVC | -40/+100 | NKT | AP010003 | FLRY-A 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 23 ± 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YBSN0035xxyy | FLRY-B |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 10 | Sn | 1,25 ± 0,03 | Soft-PVC | -40/+70 | Leoni | 88030810 | LiY 1 x 0,35 mm² SN |
3518-4 S03 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2 | Sn | 1,40 ± 0,20 | PVC | -5/+70 | Tele-Fonika | TT1-7266v3 | LiYc 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 23 ± 2 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | EFYBSN00358000 | FLRY-B 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | ≤ 20 | Sn | 1,63 ± 0,08 | XLPE | -40/+125 | Champlain | 15-08630-xxx | 3266 AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 15 ± 3 | - | 1,45 ± 0,1 | PVC | -40/+70 | Cablena | 40.028.300.2 | LiY 0,35 mm² |
3518-4 S03 | 0,35 | 7 x 0,26 mm | 23 | - | 1,3 - 0,1 | ETFE | -65/+180 | Leoni MoCar | 76820010F | Mocar 180E 0,35-A/ 1,25 |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 20 | - | 1.32 | PE | -40/+150 | Acome | T6436H | A4Z 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 20 ± 5% | Sn | 1,20–1,30 | PVC | -40/+105 | Cablena | 06.102.xxx.x | FLRY-B 0,35 SN |
3518-4 S03 | 0,35 | 12 x 0,21 mm | ≤ 27 | - | 1,2-1,4 | XLPE | -40/+125 | Condumex | FLRY-B 0,35mm², blue | 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | 20 | Sn | 1,20-1,40 | PE | -40/+150 | Draka | FLR91X-A hffr 0,35 Sn SWWS | FLR91X-A hffr |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | 25 | Sn | 1,3 -0,1 | ETFE | -40/+175 | Gebauer & Griller | 81728 | FLR7Y 0,35 mm² sn-A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 12.6 | - | 1,50–1,60 | PE | -40/+150 | Sumitomo | SEPM FLR91X | 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | 27 | - | 1,20 -0,1 | ETFE | -40/+175 | Gebauer & Griller | 74 876 | FLU7Y 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 16 ± 2 | - | 1,5 ± 0,1 | PVC | ≤ +90 | Salcavi | R46117 | FR70R90S 2x0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,35 +0,1/-0,05 | PVC | -10/+105 | Vercavi | HH1035----SF | FR 3/2 1 x 0.35mm² |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 17 | - | 1,4 -0,2 | XPE | -40/+150 | Gebauer & Griller | GG# 146234 | FLR2X 0,35(0,15) /T150 |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 16.8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22---S5 | AWG 22 (0,35 mm²) UL1569 |
3518-4 S03 | 0,35 | 12 x Ø 0,193 mm | 20.3 | Sn | 1,60 ± 0,1 | PVC | -15/+105 | Vercavi | HJ1x22---S1 | AWG 22 UL 1569 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 15 ± 2 | Sn | 1,40 ± 0,10 | PVC | -40/+105 | KBE | 5000350110250A | LiY 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 20.5 | - | 1,20–1,30 | PE | -40/+125 | Acome | T5010E | A3BW ZH A 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 ± 3 | - | 1,3 -0,1 | XPE | -40/+150 | Coficab | 2X4A0035XXYY | FLR2X T4 0,35mm² A |
3518-4 S03 | 0,35 | 12 x Ø 0,19 mm | 14 | Sn | 1,30 ± 0,05 | PVC | -40/+105 | Telefonika | TT1-4142 | FLRY-B 0,35mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 18 | Sn | 1,4 -0,2 | PVC | -40/+105 | Coficab | YASN0035xxyy | FLRY-B |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 16 | - | 1,2–1,3 | PVC | -40/+105 | Force | P0021996 | FLRY-A 0,35 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 1,35 ± 0,05 | PFA | -60/+180 | Industria Cavel | PF22CSK# | AWG 22 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 17 | - | 1,2-1,4 | PP | -40/+125 | Gebauer & Griller | GG# 146238 | FLR9Y 0,35 (0,15)/T125 |
3518-4 S03 | 0,35 | 12 x Ø 0,2 mm | ≤ 24 | Sn | 1,35 ± 0,04 | PVC | -10/+90 | IRCE | 41V6010003500xxK | S03V2-K 1 x 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 ± 0,85 | Ag | 1,3 ± 0,1 | TE-100 | -190/+200 | HEW | 3607 | PTFE Litze AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 30 | - | 1,25-1,40 | PVC | 105 | Coficab | C.UN.035MM2 PSA T2 NE | PSA 0,35 mm² IR T2 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,40 ± 0,10 | PVC | -40/+70 | Cablena | 40.070.XXX | LiY 0,35-A Sn |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 12 | Sn | 1.6 | PVC | -5/+70 | Telefonika | TT1-7129 | LiY c 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,247 mm | 12 ± 2,0 | Sn | 1,40 ± 0,2 | PVC | -5/+70 | Telefonika | TT1-7266v2 | LiY c 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,4 -0,2 | XPE | -40/+150 | Gebauer & Griller | 121350 FLR2X 0,35 A/ T 150-GG#111147 | FLR2X 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 15 ± 2 | Sn | 1,65 ± 0,1 | XLPE | 125 | Nistar | NS-D 20046 | AWG 22 |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | ≤ 27 | - | 1,40 -0,2 | PP | -40/+125 | Gebauer & Griller | FLR9Y0,35-B/T125 | 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,27 mm | ≤ 27 | - | 1,20-1,40 | PP | -40/+125 | Coficab | A39YA00354055 | A39Y-3TAD |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | ≤ 27 | - | 1,4 -0,2 | PVC | -40/+105 | Coficab | YB0035XXYY | FLRY-B 0,35 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,3 -0,1 | PVC | -40/+125 | Coficab | DRYWA0035xxyy | FLRYW 0,35-A |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | ≤ 12,60 | Sn | 1,65 ± 0,05 | Soft PVC | -40/+105 | Arvo | 267221 | LiYv AWG 22/7 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | < 17 | - | 1,58 +0,05/-0,03 | PVC | +105 | Alstermo | 1288 | AWG 22/Style 1569 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,30 ± 0,1 | TPE-E | -40/+150 | Gebauer & Griller | 68534 | FLR13Y-A 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 9,53 | Sn | 1,6 | PVC | +105 | Champlain | 1430 / 22107 | 22 7TC 105C 300V 1430 016 XLPVC CSA REW |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 12 | Sn | 0.4 | Polyolefine | 125 | Nexans | EPX 125 FR | AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 ± 0,008 mm | - | 1,30 ± 0,10 | TPE-E | -40/+150 | LTK | ST-FL/YA-130M | FLR13Y-A | |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Cu-ETP1 | 1,30 -0,1 | TPE-S | -40/+125 | Leoni | 76M00141 | MOCAR 125 S 0,35-A Deca BDE free |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | - | 1,30 - 0,1 | TPE-E | -40/+150 | Leoni | 76M00020 | MOCAR 150C 0,35A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 25 | Sn | 1,4 | XPE | -40/+150 | Gebauer & Griller | 111147 | FLR2x0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 25,4 | - | 1,501,70 | PVC | +85 | Dixie | MS7889-22 | MIL 120A, GPT-TW, 22AWG |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | < 27 | - | 1,21,3 | PVC | -40/+105 | Coficab | YA0035xxyy | FLRY |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730857 | LIY 1x0,35 BL 1,4mm |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 -0,2 | PVC | -40/+105 | KBE | 1000350110195A | FLRY 0,35 mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,2 mm | 30 ± 10 | - | 1,30 ± 0,1 | PVC | -40/+105 | ICC | C8460004 | FLRY-B |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -40/+90 | Coficab | BLIYW00352500 | LiYW |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Coficab | BLIY00355000 | LiY |
3518-4 S03 | 0,35 | 7 x 0,26 mm | 25 | - | 1,3 - 0,1 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,35-A/ T125 SW-GG#126364 | FLR9Y 0,35-A/ T125, 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 12-26 | - | 1,5 ± 0,10 | PVC | 70 | Baohing | SWE-FBBH-169-H4WY | H05V-K 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +260 | Omerin | 150.15.01.00K | PFA 1x0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 14,5 | Sn | 1,35 ± 0,05 | PFA | +180 | Cet | 150.15.01.00T | PFA 1x0,35 mm² |
3518-4 S03 | 0,35 | 19 x Ø 0,15 mm | 20 ± 3 | - | 1, 55 ± 1,6 | TPV | -40/+100 | Nexans | 13050017 | SY 0.35 |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +70 | Prysmian, Turkey | 2006-VS-70-035 | 05V-K 0.35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 18 | - | 1,35 ± 0,35 | PVC lead-free | +90 | Prysmian, Turkey | 2006-VS-90-035 | 05V2-K 0.35 mm² |
3518-4 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11575 | |
3518-4 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R11529 | |
3518-4 S03 | 0,35 | 11 x Ø 0,193 mm | 36 | - | 1,60 ± 0,10 | PVC | +70 | Salcavi | R10789 | |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 16 | - | 1,35 ± 0,10 | PVC | +105 | Nursan | K04JG0 | 0,35mm² |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm | 20,40 | Sn | 1,35 +0,1/-0,05 | PVC | +105 | Vercavi | HH1035BI00SE | FR3/2 HAT 105 SEZ 1X0,35 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,04 | PTFE | +200 | Habia | 404-21033-040 | PTFE 0.35 Z |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 16 | - | 1,58 +0,02/-0,03 | PVC | -25/+105 | KBE | 4100220100194K | UL 22 AWG AWM Stylle 1569 |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 8,6 | Sn | 1,25 ± 0,05 | ETFE | +150 | Habia | 504-27012-070 | C3 7Y(Z) AWG22/19 ws |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 26 | - | 1,3 ± 0,10 | PVC | 90 | Baohing | C1112828 | FB S03V2-R |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | Sn | 1,25 ± 0,10 | FEP | -50/+180 | Sontec | BT-6901 | SL-FEP | |
3518-4 S03 | 0,35 | 7 x Ø 0,25 | 13 | Sn | 1,35 | PFA | +180 | Sami | Q0TA3BPGxx | AWG22 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 | 8 +/- 3 | Sn | 1,35 ± 0,08 | PFA | +250 | Haerkn | HK20130924002E | AWG22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 | 20,4 | - | 1,25 ± 0,05 | PE | -40/+150 | Acome | T6510 A4F LH A 0.35mm² | 0,35 mm² (AWG22) |
3518-4 S03 | 0,35 | 7 x Ø 0,25 | 30 ± 5 | - | 1,3 ± 0,1 | PVC | -40/+125 | ICC | Cable Fiat 91107/17 | FLR9Y-B 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,25 | 30 | - | 1,3 ± 0,1 | PVC | -40/+105 | ICC | C738000D | FLRY-B 0,35mm² |
3518-4 S03 | 0,35 | 19 x Ø 0,16 mm | 15 | - | 1,58 + 0,05 | PE FR | +120 | Amokabel | 1517 | RX 0,35 300 V |
3518-4 S03 | 0,35 | 12 x Ø 0,19 mm | 28 | Sn | 1,40 | PVC | +90 | IRCE | 2277 | S03V2-K 1X0,35 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 8,5 | Sn | 1,30 ± 0,10 | ETFE | +150 | HEW | 2838 | HEW-ETFE Aderltg. Vz AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 10 | Sn | 1,35 ± 0,05 | FEP | -25/+180 | Leoni | 89030535A | LI6Y6Y 1x0,35 SN |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 11 | Sn | 1,35 ± 0,05 | FEP | -55/+150 | Leoni | 89A00019 | LI6Y6Y 1x0,35 SN AWG22 |
3518-4 S03 | 0,35 | 12 x Ø 0,193 | 16,8 | Sn | 1,55 ± 0,1 | PVC | -25/+105 | Vercavi | HJ1X22----S1 | AWG22 |
3518-4 S03 | 0,35 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,4 ± 0,05 | PVC | +70 | Taicheng Tongling | LIY-0.35mm² | LIY 0.35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 17 | - | 1,30 ± 0,10 | TPE-E | +150 | Gebauer & Griller | 68534 | FLR12Y 0,35-A |
3518-4 S03 | 0,35 | 12 x Ø 0,20 | 27 | Sn | 1,4 ± 0,1 | PVC | +70 | Leoni | 88730860A | LiY 1x0,35 SN SKT |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 35 | Sn | 1,4 -0,2 | PVC | -40/+105 | Leoni | 76783016K | FLRY-B 0,35SN-B/T105 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 | 15 +/- 3 | Sn | 1,35 ± 0,08 | PVC | +105 | Haerkn | HK20130924001E | AWG22 |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,5 ± 0,1 | PVC | +90 | Baohing | FBSBH -204/3-SWR | H05V2-K 0,35mm² | |
3518-4 S03 | 0,35 | 7 x Ø 0,27 | 25 | - | 1,23 ± 0,04 | XPE, cross-linked | -40/+150 | Gebauer & Griller | 135393 | FLU2X 0,35-A /T150 SW |
3518-4 S03 | 0,35 | 19 x Ø 0,16 | 10 | Sn | 1,25 ± 0,03 | FEP/FEP | -100/+180 | Coroplast | 18-1153 | LI6Y6Y 0,35mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,26 | 15 | Sn | 1,35 | PVC | +105 | C.E.Cam. | V2035135PCS | AWG22 |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | 27 | - | 1,25 ± 0,05 | PVC | -40/+105 | Coficab | YA00358000S | FLRY-A |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | - | 1,25 - 1,40 | PVC | -40/+100 | Coficab | IRT200358000 | IRT2 | |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | 32 | Sn | 1,6 ± 0,10 | XLPE | 150 | Baohing | C1307832 | AWG 22 |
3518-4 S03 | 0,35 | 7 x Ø 0,25 mm | - | 1,2 - 1,3 | PP | -40/+125 | Coficab | 9YA00358000S | FLR9Y-A | |
3518-4 S03 | 0,35 | 7 x 0,25 mm | 5-10 | Sn | 1,25 ± 0,03 | PVC | -40/+70 | Leoni | 88030810# | LiY 0,35 mm² |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64240615B | L03VV-F 6x0,35 BL | |
3518-4 S03 | 0,35 | 7 x Ø 0,254 mm | - | 1,35 ± 0,05 | PVC TI 2 | -30/+60 | Leoni | 64210515# | S03VV-F 4x0,35BL SKT 4,9mm | |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 23 | - | 1,30 - 0,10 | Soft-PVC lead-free | -40/+105 | Leoni | 76783010# (K999KPK01) | FLRY 0,35-A (AWG 22) |
3518-4 S03 | 0,35 | 7 x Ø 0,245 mm | 30 | - | 1,25-1,40 | PVC | -40/+125 | Coficab | B300358000S | 0,35 AWG 22 IRT3 |
3518-4 S03 | 0,35 | 7 x Ø 0,26 mm | 11,5 | - | 1,25 ± 0,05 | Polyolefin | +150 | Huber + Suhner | 12567923 | Radox 155S RW |
3518-4 S03 | 0,35 | 12 x Ø 0,21 mm | 25 | Sn | 1,40 ± 0,10 | PVC lead-free | +105 | Coroplast | 6-0111 | FLRY 0,35 mm² |
3518-4 S03 | 0,355 | 7 x Ø 0,245 mm | 17 ± 10 % | Sn | 1,55 +0,02/-0,04 | PCV | -25/+105 | KBE | 4100225110245K | AWG 22 Style 1569 |
3518-4 S03 | 0,38 | 12 x Ø 0,194 | 10-14 | - | 1,4-1,6 | PVC | +80 | Taicheng Tongling | LiY 0,38mm² | LiY 0,38mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 | 15 ± 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Leoni China | LC-10-0584 | LiY 0,38 |
3518-4 S03 | 0,38 | 19 x Ø 0,16 +/- 0,005 | 15 +/- 2 | Sn | 1,55 +/- 0,05 | PVC | 80 | Xin Zheng Heng | 22A0455RS1 | AWG 22 |
3518-4 S03 | 0,38 | 12 x 0,203 mm | 14,4 ± 10% | Sn | 1,15 ± 0,1 | FEP | -100/+180 | HEW | 68905 | TE-Aderleitung |
3518-4 S03 | 0,38 | 19 x Ø 0,16 ± 0,005 | 15 ± 2 | Sn | 1,55 ± 0,05 | PVC | 80 | Xin Zheng Heng | 22A0455BS1 | AWG 22 |
3518-4 S03 | 0,38 | 12 x Ø 0,203 mm | 14,4 ± 10 % | Sn | 1,35 ± 0,05 | TETE-302 | -100/+180 | HEW | 23069 | TETE 0,38 mm² |
3518-4 S03 | 0,38 | 19 x Ø 0,16 mm | 8,4 | Sn | 1,911,99 | TE-302 | +150 | HEW | 36247 | HEW-FEP-Aderleitung |
3518-4 S03 | 0,38 | 19 x Ø 0,160 mm | 6/10 | Sn | 1,17 + 0,20 | ETFE | +135 | Draka | 36824 | C3 7Y (Z) 22/19 ws Sp 1500 |
3518-4 S03 | 0,38 | 12 x Ø 0,194 | 15 +/- 2 | - | 1,45 ± 0,1 | PVC | -15/+70 | Leoni China | LC-10-0581 | LiY 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 21/21,6 | - | 1,4 ± 0,05 | VPE | +110 | Kromberg & Schubert | 352118 | FLR2X 0,38 mm²-B |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +70 | Leoni | 88730855 | LIY 1x0,38 BL 1,4mm |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 24 | Sn | 1,40 ± 0,05 | PVC | +90 | Leoni | 88730856 | LIYW 1x0,38 BL 1,4mm |
3518-4 S03 | 0,38 | 7 x Ø 0,20 mm | 17 | - | 1,60 ± 0,05 | PVC | +105 | Jiangyang | 9000162431 | RV 1X0,38mm² |
3518-4 S03 | 0,38 | 19 x Ø 0,16 mm | 16 ± 3 | Sn | 1.4 | XLPE | 120 | Kurabe | AESSX 0.3f, SP3521K | 0,38 mm² |
3518-4 S03 | 0,38 | 19 x Ø 0,16 mm | 12,6 | Sn | 1,7 | Special PVC | +105 | Medi | 120229 | |
3518-4 S03 | 0,38 | 12 x Ø 0,2 mm | 14 ± 1,4 | Sn | 1,5 ± 0,1 | PA/PVC | +5/+80 | Leoni | 8900000NA | LiY4Y 1x0,38 SN (AWG22/ 12) |
3518-4 S03 | 0,38 | 12 x Ø 0,2 mm | 14 | - | 1,4 | HFFR | -30/+70 | Leoni | 88A00015 | LiH 0,38 |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+70 | Leoni | 88200132 | LIY |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC | -40/+105 | Leoni | 88200130 | LIYW |
3518-4 S03 | 0,38 | 12 x Ø 0,21 mm | 16 | - | 1,60 ± 0,20 | PVC lead-free | +110 | KBE | 1800380000195C | FLYW 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+70 | Cablena | 2335 | LiY 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 ± 10 | - | 1,4 ± 0,05 | PVC | -40/+105 | Cablena | 1116 | LiYW 0,38 mm² |
3518-4 S03 | 0,38 | 17 x Ø 0,160 mm | 20 | Sn | 1,60 ± 0,10 | PVC | +80 | Future Max | E174587 | UL 1007/HOOK-UP WIRE |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | Sn | 1,58 + 0,02/-0,03 | PVC lead-free | +105 | Leoni, Mexico | 89170842A | LIYW 0,38 Sn AWG 22/12 UL1569 CSA T1 |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm ± 0,006 | 15 ± 1,5 | - | 1,58 ± 0,02 | PVC | -10/+105 | Leoni | 89170840A | LiYW 0,38 BL (AWG 22/ 12) |
3518-4 S03 | 0,38 | 12 x Ø 0,20 mm | 27 | Sn | 1,5 ± 0,1 | PVC lead-free | +105 | Leoni | 88730872A | LIYW 1 x 0,38/0,2-S SN SKT |
3518-4 S03 | 0,38 | 12 x Ø 0,194 mm | 15 | - | 1,4 ± 0,05 | PVC lead-free | +105 | Leoni, Poland | 88200130M | LiYW 0,38 mm² |
3518-4 S03 | 0,38 | 12 x Ø 0,194 ± 0,006 mm | 15 | - | 1,40 ± 0,05 | PVC | +5/+70 | Leoni | 88200132Z | LiY 0,38 mm² |
3518-4 S03 | 0,39 | 19 x Ø 0,17 mm | 15.2 | Sn | 1,60 ± 0,1 | PVC | -30/+105 | Leoni | 89760101A | LiYW 0,39 SN AWG 22 |
3518-4 S03 | 0,5 | 19 x 0,19 mm | 20 | - | 1,6-0,2 | PP | -40/+125 | Gebauer & Griller | FLR9Y 0,5-A/ T125 SW-GG#145498 | FLR9Y 0,5-A/ T125, 0,50mm² |
3518-4 S03 | 0,54 | 19 x Ø 0,19 mm | 23 | Sn | 1.6 | XPE | -40/+150 | Gebauer & Griller | FLR2X 0,5sn-A/T150-GG#111603 | FLR2X 0,5 mm² |
Approved Cables for 3518-4 S04
Conductor | Insulation | Manufacturer | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Typ | Cross Section (mm²) |
Construction | Lenght of Lay (mm) |
Surface finishing |
Diameter (mm) |
Material | Temp. Range (°C) |
Name | Designation | Description |
3518-4 S04 | 0,12 | 7 x Ø 0,16 mm | 8.9 | Sn | 1,05 ± 0,05 | TPE | -40/+125 | Leoni | 88A00142 | Li31Y 1x0,12 SN |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
03/2023