33
RAST 1.5 connectors, pitch 1.5 mm
RAST 1.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without closed sides
| 国家： | 新 |
| 批准 | cULus (pending), VDE |
技术数据
环境条件
Temperature range: -40 °C/+130 °C *1
1) upper limit temperature (insulating body) RTI (electrical) of the UL Yellow Card
物料
Insulating body: PA GF, V-0 according to UL94 *1
Contact spring: CuSn, tin-plated
1) material halogen-free and ATO-free, component glow wire resistant (GWEPT 750 °C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s)
机械数据
Mating with: printed circuit board 1.5 ± 0.14 mm
Insertion force/contact: ≤ 2.0 N
Withdrawal force/contact: ≥ 0.3 N
IDT区域可连接的导线
Construction: discrete conductor
Section min.: 0.22 mm²
Section max.: 0.22 mm²
Insulation diameter: ≤ 1.2 mm
Note: Most products are available with different IDT contact variants. Please note the section Approved Cables below.
电气数据（Tamb 20 °C）
Rated current: 3 A (Tamb 85 °C, VDE)
Rated voltage: 50 V
批准的电线
批准的电线，用于 331000 S00Download (PDF)
| 导体 | 绝缘 | 制造商 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Typ | 截面积 （mm²） |
结构 | 绞距 （mm） |
表面处理 | 直径 （mm） |
材料 | 温度范围 （°C） |
名称 | 名称 | 描述 |
| 331000 S00 | 0,22 | 7 x Ø 0,21 mm | 9 | - | 1,1 -1,2 | PVC | -40/+105 | Leoni | 76783002# | FLRY 0,22-A |
| 331000 S00 | 0,22 | 7 x Ø 0,2 mm | 7–9 | - | 1,15 ± 0,05 | TPE | -40/+125 | Leoni | 88260330# | LI31Y 1x0,22 BL SKT 1,15 |
| 331000 S00 | 0,22 | 7 x Ø 0,2 mm | 9 | - | 1,15 ± 0,05 | TPE | -30/+125 | Omerin | Q0507001 | PLASTHERM 41 0,22mm² |
| 331000 S00 | 0,22 | 7 x Ø 0,2 mm | 7–9 | - | 1,15 ± 0,05 | PVC | -40/+70 | Leoni | 8800001NA | LIY 1X0,22 BL |
| 331000 S00 | 0,22 | 7 x Ø 0,194 mm ± 0,006 | 7–9 | - | 1,15 ± 0,05 | PVC | -5/+90 | Leoni | 8800001MA | LiYW 1x0,22 BL |
| 331000 S00 | 0,22 | 7 x Ø 0,2 mm | 9 -2,0 | - | 1,15 ± 0,05 | PVC | -5/+105 | Leoni | 8900003IA | LiYW 1 x 0,22 mm² BL UL 11324 |
| 331000 S00 | 0,22 | 7 x Ø 0,21 mm | 16 ± 2 | - | 1,20 -0,1 | PE | -40/+150 | Prysmian | 20273209 | FLR91X-A hffr |
Connector systems with insulation displacement and crimp technology require suitable cables and accurate processing. In order to assure safe function of the connectors they must be processed with Lumberg harnessing equipment (series 97), according to Lumberg processing instructions, using cables approved by Lumberg. Do not hesitate to contact us if you have any questions!
The cables listed here have been tested in the laboratory and have been approved suitable for the specified connector type. Lumberg cannot assume warranty for possible modifications on the part of the cable manufacturer. It is the user’s responsibility to ensure the compatibility of the chosen components and their appropriateness for the intended application.
04/2024