7200
Press-fit contact 0.6 for customer-specific interconnect solutions, according to internal test specifications as per automotive requirements on the basis of IEC 60352-5
Result for: "💡 Treat a wide range of bacterial infections with Bactrim -💎: Order in Online Pharmacy :💚 www.powerpills.net 💚: Cheap Bactrim Price -💎: Buy Sulfamethoxazole/trimethoprim Online :💎- Bactrim For Sale Without Prescription"
600 products
7201
Press-fit contact 0.8 for customer-specific interconnect solutions, according to internal test specifications as per automotive requirements on the basis of IEC 60352-5
733520
SmartSKEDD direct connector, insulation displacement technology (IDT), with keying pins, positioning spigot and locking on the printed circuit board
contact pitch 2.5 mm
New
332100
RAST 1.5 connector for direct and indirect mating, insulation displacement technology (IDT)
733530
SmartSKEDD direct connector, insulation displacement technology (IDT), with keying pins, positioning spigot and locking on the printed circuit board
contact pitch 5.0 mm
733500
SmartSKEDD direct connector, insulation displacement technology (IDT), with keying pins, positioning spigot and double locking on the printed circuit board
contact pitch 2.5 mm
New
331000
RAST 1.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without closed sides
733510
SmartSKEDD direct connector, insulation displacement technology (IDT), with keying pins, positioning spigot and double locking on the printed circuit board
contact pitch 5.0 mm
New
4580 01 SP T0,8
High-current contact bush, in through hole technology (THT), mateable from top, bottom or lateral direction, for tab contacts 0.8 mm, for printed circuit boards
New
4580 01 OP T0,8
High-current contact bush, in surface mount technology (SMT), mateable from top, bottom or lateral direction, for tab contacts 0.8 mm, for printed circuit boards or busbars
New
4580 01 MP T0,8
High-current contact bush with positioning peg, in surface mount technology (SMT), mateable from top, bottom or lateral direction, for tab contacts 0.8 mm, for printed circuit boards or busbars
4580 03 OP T0,8
High-current contact bush, in surface mount technology (SMT), mateable from top or bottom direction, for tab contacts 0.8–1.5 mm, for printed circuit boards or busbars
4580 03 OP T2,0
High-current contact bush, in surface mount technology (SMT), mateable from top or bottom direction, for tab contacts 1.5–2.0 mm, for printed circuit boards or busbars
4580 03 MP T0,8
High-current contact bush with positioning pegs, in surface mount technology (SMT), mateable from top or bottom direction, for tab contacts 0.8–1.5 mm, for printed circuit boards or busbars
4580 03 MP T2,0
High-current contact bush with positioning pegs, in surface mount technology (SMT), mateable from top or bottom direction, for tab contacts 1.5–2.0 mm, for printed circuit boards or busbars
4580 04 OP T1,0
High-current contact bush, for tab contacts 1.0 mm, in surface mount technology (SMT), for printed circuit boards or busbars
4580 04 MP T1,0
High-current contact bush with positioning pegs, in surface mount technology (SMT), for tab contacts 1.0 mm, for printed circuit boards or busbars
3521
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), for individual conductors, daisy chain possible
contact pitch 2.5 mm
3521-2
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), for ribbon cable
contact pitch 2.5 mm
352100
RAST 2.5 plus™ connector for direct and indirect mating, with double-sided keying, insulation displacement technology (IDT) contact pitch 2.5 mm
3523
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT) , for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3523-2
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), for ribbon cable, consecutive placement without loss of pitch
contact pitch 5.0 mm
352300
RAST 2.5 plus™ connector for direct and indirect mating, with double-sided keying, insulation displacement technology (IDT), consecutive placement without loss of pitch
contact pitch 5.0 mm
3520
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), with interior locking, for individual conductors, daisy chain possible
contact pitch 2.5 mm
3520-1
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), with interior locking, for ribbon cable, daisy chain possible contact pitch 2.5 mm
3520-2
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), with interior locking, for ribbon cable
contact pitch 2.5 mm
3522
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), with interior locking, for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3522-1
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), with interior locking, for ribbon cable, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3522-2
RAST 2.5 connector for direct and indirect mating, insulation displacement technology (IDT), with interior locking, for ribbon cable, consecutive placement without loss of pitch
contact pitch 5.0 mm
3510
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible
contact pitch 2.5 mm
3510-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides, for ribbon cable, daisy chain possible
contact pitch 2.5 mm
3510-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides, for ribbon cable
contact pitch 2.5 mm
3511
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3511-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides, for ribbon cable, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3511-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without keying rib and closed sides, for ribbon cable, consecutive placement without loss of pitch
contact pitch 5.0 mm
3512
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of lateral locking hooks, with keying rib, for individual conductors, daisy chain possible
contact pitch 2.5 mm
3512-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of lateral locking hooks, with keying rib, for ribbon cable, daisy chain possible contact pitch 2.5 mm
3512-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of lateral locking hooks, with keying rib, for ribbon cable
contact pitch 2.5 mm
3513
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of lateral locking hooks, with keying rib, for individual conductors, daisy chain possible
contact pitch 5.0 mm
3513-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of lateral locking hooks, with keying rib, for ribbon cable, daisy chain possible contact pitch 5.0 mm
3513-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of lateral locking hooks, with keying rib, for ribbon cable, consecutive placement without loss of pitch
contact pitch 5.0 mm
3515
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible
contact pitch 2.5 mm
3515-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks, alternatively with or without keying rib and closed sides, for ribbon cable, daisy chain possible
contact pitch 2.5 mm
3515-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks, alternatively with or without keying rib and closed sides, for ribbon cable
contact pitch 2.5 mm
3516
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3516-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks, alternatively with or without keying rib and closed sides,for ribbon cable, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3516-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks, alternatively with or without keying rib and closed sides, for ribbon cable, consecutive placement without loss of pitch
contact pitch 5.0 mm
3517
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible
contact pitch 2.5 mm
3517-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, for ribbon cable, daisy chain possible
contact pitch 2.5 mm
3517-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, for ribbon cable
contact pitch 2.5 mm
3517-4
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of enhanced locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible
contact pitch 2.5 mm
New
3517-5
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of enhanced locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible
for printed circuit boards of 1 mm thickness
contact pitch 2.5 mm
New
351700
RAST 2.5 plus™ connector for direct mating, with double-sided keying, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides
contact pitch 2.5 mm
3518
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3518-1
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, for ribbon cable, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
3518-2
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, for ribbon cable, consecutive placement without loss of pitch
contact pitch 5.0 mm
3518-4
RAST 2.5 connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of enhanced locking toes, alternatively with or without keying rib and closed sides, for individual conductors, daisy chain possible, consecutive placement without loss of pitch
contact pitch 5.0 mm
New
351800
RAST 2.5 plus™ connector for direct mating, with double-sided keying, insulation displacement technology (IDT), with locking on printed circuit board by means of locking toes, alternatively with or without keying rib and closed sides, consecutive placement without loss of pitch
contact pitch 5.0 mm
3551
RAST 2.5 pin header, upright, with positioning spigot, for interior locking, daisy chain possible
contact pitch 2.5 mm
355195
RAST 2.5 plus™ pin header, upright, in surface mount technology (SMT), with one or two positioning spigots, for interior locking, daisy chain possible, with double-sided keying
contact pitch 2.5 mm
3553
RAST 2.5 pin header, upright, with positioning spigot, for interior locking, daisy chain possible
contact pitch 5.0 mm
355395
RAST 2.5 plus™ pin header, upright, in surface mount technology (SMT), with one or two positioning spigots, for interior locking, daisy chain possible, with double-sided keying
contact pitch 5.0 mm
355096
RAST 2.5 pin header, with locking latch (without positioning spigot)
contact pitch 2.5 mm
3550
RAST 2.5 pin header, with locking latch and positioning spigot
contact pitch 2.5 mm
355099
RAST-2.5-plus™ pin header, upright, with locking latch and positioning spigot, with double-sided keying
contact pitch 2.5 mm
355095
RAST 2.5 plus™ pin header, upright, in surface mount technology (SMT), with locking latch and one or two positioning spigots, with double-sided keying
contact pitch 2.5 mm
3552
RAST 2.5 pin header, with locking latch and positioning spigot
contact pitch 5.0 mm
355299
RAST-2.5-plus™ pin header, upright, with locking latch and positioning spigot, with double-sided keying
contact pitch 5.0 mm
355295
RAST 2.5 plus™ pin header, upright, in surface mount technology (SMT), with locking latch and one or two positioning spigots, with double-sided keying
contact pitch 5.0 mm
3555
RAST 2.5 pin header, angular, for interior locking, daisy chain possible
contact pitch 2.5 mm
3557
RAST 2.5 pin header, angular, for interior locking, daisy chain possible
contact pitch 5.0 mm
3554
RAST 2.5 pin header, angular, with locking latch
contact pitch 2.5 mm
3556
RAST 2.5 pin header, angular, with locking latch
contact pitch 5.0 mm
3541
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 2.5 mm
3541-1
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 2.5 mm
3542
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3542-1
RAST 2.5 pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3545
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 2.5 mm
3545-1
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 2.5 mm
3546
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
3546-1
RAST 2.5 chassis pin header, insulation displacement technology (IDT), with locking latch
contact pitch 5.0 mm
83545
RAST 2.5 double chassis pin header, with locking latches contact pitch 2.5 mm
83546
RAST 2.5 double chassis pin header, with locking latches contact pitch 5.0 mm
3570
RAST 2.5 Power connector for direct and indirect mating, insulation displacement technology (IDT), consecutive placement without loss of pitch
contact pitch 5.0 mm
357099
RAST 2.5 Power connector for direct and indirect mating, with double-sided keying, insulation displacement technology (IDT), consecutive placement without loss of pitch
contact pitch 5.0 mm
357000
RAST 2.5 Power plus™ connector for direct and indirect mating, insulation displacement technology (IDT), with double-sided keying, consecutive placement without loss of pitch
contact pitch 5.0 mm
3575
RAST 2.5 Power connector for direct mating, insulation displacement technology (IDT), alternatively with or without locking on printed circuit board, with or without keying rib and closed sides, consecutive placement without loss of pitch
contact pitch 5.0 mm
New
357600
RAST 2.5 Power plus™ connector for direct mating, insulation displacement technology (IDT), with double-sided keying, alternatively with or without locking on printed circuit board, with or without keying rib and closed sides, consecutive placement without loss of pitch
contact pitch 5.0 mm
3501
RAST 2.5 guide frame, for interior locking, daisy chain possible
3500
RAST 2.5 guide frame, with locking latch
3623 01 V01
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with locking on tab, consecutive placement without loss of pitch
3623
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with exterior lock, consecutive placement without loss of pitch
3625 01
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with locking on tab, consecutive placement without loss of pitch
3625
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with exterior locking, consecutive placement without loss of pitch
3625-1
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with exterior locking, consecutive placement without loss of pitch, for use in a higher temperature range
3626
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with interior locking, consecutive placement without loss of pitch
3627
RAST 5 connector for indirect mating, insulation displacement technology (IDT), with interior locking, consecutive placement without loss of pitch
3628
RAST 5 chassis connector for indirect mating, insulation displacement technology (IDT), with interior locking
3628-1
RAST 5 chassis connector for indirect mating, insulation displacement technology (IDT), with interior locking, for use in a higher temperature range
3611
RAST 5 connector for indirect mating, with screw terminal, with lift clamp with protection against misplacing, with interior locking, consecutive placement without loss of pitch
3615
RAST 5 connector for indirect mating, with screw terminal, with lift clamp with protection against misplacing, with test holes and interior locking, consecutive placement without loss of pitch, cable departure opposite to lock
3615-1
RAST 5 connector for indirect mating, with screw terminal, with lift clamp with protection against misplacing, with test holes and interior locking, consecutive placement without loss of pitch, cable departure opposite to lock, with handle latch
3615-2
RAST 5 connector for indirect mating, with screw terminal, with lift clamp with protection against misplacing, with test holes and interior locking, consecutive placement without loss of pitch, cable departure on side of lock
3615-3
RAST 5 connector for indirect mating, with screw terminal, with lift clamp with protection against misplacing, with test holes and interior locking, consecutive placement without loss of pitch, cable departure on side of lock, with handle latch
3633
RAST 5 connector for direct mating, insulation displacement technology (IDT), with exterior locking, consecutive placement without loss of pitch
3636
RAST 5 connector for direct mating, insulation displacement technology (IDT), alternatively with or without locking on printed circuit board, with or without keying rib and closed sides, consecutive placement without loss of pitch
3612
RAST 5 connector for direct mating, with screw terminal, with lift clamp with protection against misplacing, with interior locking, consecutive placement without loss of pitch
3613
RAST 5 connector for direct mating, with screw terminal, with lift clamp with protection against misplacing, with keying rib and closed sides, consecutive placement without loss of pitch
3614
RAST 5 connector for direct mating, with screw terminal, with lift clamp with protection against misplacing, alternatively with or without keying rib and (shorter) closed sides, consecutive placement without loss of pitch
3641
RAST 5 tab header, upright, with positioning spigot
3641 V167
RAST 5 tab header, upright, with positioning spigot, contact tab silvered
364199
RAST 5 tab header, upright, with positioning spigot, with pre-mating protective contacts
364197
RAST 5 tab header, upright, with positioning spigot, pottable version
364197 V167
RAST 5 tab header, upright, with positioning spigot, pottable version, contact tab silvered
3642
RAST 5 tab header, angular, with topside lock
364299
RAST 5 tab header, angular, with topside lock, with pre-mating protective contacts
3642 V167
RAST 5 tab header, angular, with topside lock, contact tab silvered
3643
RAST 5 tab header, angular, with lower side lock
3643 V167
RAST 5 tab header, angular, with lower side lock, contact tab silvered
364399
RAST 5 tab header, angular, with lower side lock, with pre-mating protective contacts
3645
RAST 5 tab header, angular, with lower side lock, higher version
3645 V167
RAST 5 tab header, angular, with lower side lock, higher version, contact tab silvered
364599
RAST 5 tab header, angular, with lower side lock, higher version, with pre-mating protective contacts
3644
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigots
3644 V167
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigots, contact tab silvered
364499
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigots, with pre-mating protective contacts
3649
Dual row RAST 5 tab header, angular, with lower side lock
3671
RAST 5 tab header, upright, with positioning spigot, free to configure with partitions
367199
RAST 5 tab header, upright, with positioning spigot, free to configure with partitions and pre-mating protective contacts
3672
RAST 5 tab header, angular, with topside lock, free to configure with partitions
367299
RAST 5 tab header, angular, with topside lock, free to configure with partitions and pre-mating protective contacts
3673
RAST 5 tab header, angular, with lower side lock, free to configure with partitions
367399
RAST 5 tab header, angular, with lower side lock, free to configure with partitions and pre-mating protective contacts
3674
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigot, free to configure with partitions
367499
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigot, free to configure with partitions and pre-mating protective contacts
3676
RAST 5 tab header, upright, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)
3677
RAST 5 tab header, angular, with topside lock, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)
3678
RAST 5 tab header, angular, with lower side lock, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)
3679
RAST 5 tab header, angular, with lower side lock, higher version, with positioning spigot, free to configure with partitions, neutral and/or protective conductor bridge in insulation displacement technology (IDT)
3686
RAST 5 socket board, upright, free to configure with partitions, positioning spigot and neutral and/or protective conductor bridge in insulation displacement technology (IDT)
3687
RAST 5 socket board, angular, free to configure with partitions and neutral and/or protective conductor bridge in insulation displacement technique (IDT)
3680
Combined RAST 5 tab and socket board, upright, free to configure with partitions, positioning spigot and neutral and/or protective conductor bridge in insulation displacement technology (IDT)
3683
Combined RAST 5 tab and socket board, angular, free to configure with partitions and neutral and/or protective conductor bridge in insulation displacement technology (IDT)
3647
RAST 5 tab header, insulation displacement technology (IDT)
3647-1
RAST 5 tab header, insulation displacement technology (IDT), for use in a higher temperature range
3648
RAST 5 chassis tab header, insulation displacement technology (IDT)
3618
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure opposite to lock
361899
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure opposite to lock, with pre-mating protective contact
3618-1
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure opposite to lock, with handle latch
361899-1
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure opposite to lock, with handle latch, with pre-mating protective contact
3618-2
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure on side of lock
361899-2
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure on side of lock, with pre-mating protective contact
3618-3
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure on side of lock, with handle latch
361899-3
RAST 5 tab header, with screw terminal, with lift clamp with protection against misplacing, with test holes, cable departure on side of lock, with handle latch, with pre-mating protective contact
3602
RAST 5 guide frame
3723
RAST 7.5 Power™ connector for indirect mating, insulation displacement technology (IDT), with exterior locking, consecutive placement without loss of pitch
3741
RAST 7.5 Power™ tab header, upright, with positioning spigot
MICAL
Micromodul™ solder-in connector, insulation displacement technology (IDT), solder contacts dual row staggered
MICALD
Micromodul™ solder-in connector, insulation displacement technology (IDT), solder contacts dual row parallel
MICA
Micromodul™ connector for indirect mating, insulation displacement technology (IDT), with lock, loose
MICA VP3
Micromodul™ connector for indirect mating, insulation displacement technology (IDT), with lock MICA: loose, on reel
302299
Micromodul™ connector for direct mating, insulation displacement technology (IDT), with locking on printed circuit board by means of locking hooks and toes, with closed sides
MICS
Micromodul™ tab header, upright, with retaining hooks, solder contacts dual row staggered
MICS-D
Micromodul™ tab header, upright, without retaining hooks, solder contacts dual row parallel
MICSW
Micromodul™ tab header, angular, solder contacts dual row staggered
MICS/SMD
Micromodul™ tab header, upright, in surface mount technology (SMT), solder contacts dual row staggered, with press-fit spigots, in bulk, with retaining hooks
MICS/SMD RP
Micromodul™ tab header, upright, in surface mount technology (SMT), solder contacts dual row staggered, with press-fit spigots, on reel, with pick-and-place top
AZ30
Pull-off tongs for Micromodul™ connectors
3114
Empty Minimodul™ housing for reception of crimp contacts, for indirect mating
3111 01 L
Minimodul™ crimp contact, in bulk
3111 01 G
Minimodul™ crimp contact, on reel
3111 03 L
Minimodul™ crimp contact, in bulk
3111 03 G
Minimodul™ crimp contact, on reel
2,5 MSF/O
Minimodul™ pin header, upright, solder contacts single row
2,5 MSFQ/O
Minimodul™ pin header, upright, solder contacts dual row staggered
2,5 MSF
Minimodul™ pin header, upright, with locking latch, solder contacts single row
2,5 MSFQ
Minimodul™ pin header, upright, with locking latch, solder contacts dual row staggered
2,5 MSFW/O
Minimodul™ pin header, angular, solder contacts single row
2,5 MSFW
Minimodul™ pin header, angular, with locking latch, solder contacts single row
Obsolete
2,5 MS
Minimodul™ pin header
3823
Empty Multimodul™ housing for reception of crimp contacts, for indirect mating
3111 01 L
Multimodul™ crimp contact, in bulk
3111 01 G
Multimodul™ crimp contact, on reel
3111 03 L
Multimodul™ crimp contact, in bulk
3111 03 G
Multimodul™ crimp contact, on reel
3850
Multimodul™ pin header, upright, with locking latch, with retaining hooks
3853
Multimodul™ pin header, angular, with locking latch, with retaining hooks
8385 A 01
Double Multimodul™ chassis pin header as feed-through connector, with locking latches and gasket
Phasing out
3851
Multimodul™ pin header, upright, with retaining hooks
Phasing out
3852
Multimodul™ pin header, upright, with locking latch
Phasing out
3855
Multimodul™ pin header, upright, with locking latch, with retaining hooks and cut-outs for 3801
Phasing out
3800
Multimodul™ socket board, angular, with retaining hooks
Phasing out
3801
Multimodul™ socket board, angular, with retaining hooks, with locking nose
4143 01
Shorting link, with test pick-up and handle latch
5116
Socket board for direct mating, with solder pins
contact pitch 2.54 mm
8514 A 03
Socket board for direct mating
contact pitch 5.08 mm
8514 A 01
Socket board for direct mating, with keying rib
contact pitch 5.08 mm
8514 A 02
Socket board for direct mating, with keying rib
contact pitch 5.08 mm
5 RS
Socket board for direct mating with screw terminals, lift clamp without protection against misplacing, with test hole, consecutive placement without loss of pitch
5 RS FK
Socket board for direct mating with screw terminals, lift clamp without protection against misplacing, with test hole and mounted pair of flanges FK
Phasing out
SP 4
Keying insert for socket boards with screw terminals 5 RS and 5 RS FK
KRMC
Micro screw terminal block, clamp with wire protector, upright version, consecutive placement without loss of pitch
contact pitch 3.5 mm
KRESS
Screw terminal block, clamp with wire protector, upright version, consecutive placement without loss of pitch
contact pitch 5.0 mm
Obsolete
KRES
Screw terminal block, clamp with wire protector, upright version, with test hole, consecutive placement without loss of pitch
contact pitch 5.0 mm
KRESW
Screw terminal block, clamp with wire protector, 45° angle version, with test hole, stringable without loss of pitch
contact pitch 5.0 mm
KRESL
Screw terminal block, clamp with wire protector, right angle version, with test hole, consecutive placement without loss of pitch
contact pitch 5.0 mm
KRM
Screw terminal block, clamp with wire protector, upright version, consecutive placement without loss of pitch
contact pitch 5.0 mm
6320
Miniature screw terminal block, with lift clamp without protection against misplacing, upright version, with test hole, consecutive placement without loss of pitch
contact pitch 5.0 mm
6322
Miniature screw terminal block, with lift clamp without protection against misplacing, 35° angle version, with test hole, consecutive placement without loss of pitch
contact pitch 5.0 mm
6324
Miniature screw terminal block, with lift clamp without protection against misplacing, right angle version, with test hole, consecutive placement without loss of pitch
contact pitch 5.0 mm
KRE
Screw terminal block, with lift clamp with protection against misplacing, upright version, consecutive placement without loss of pitch
contact pitch 5.0 mm
KREG
Screw terminal block, with lift clamp with protection against misplacing, with stronger screw, upright version, consecutive placement without loss of pitch
contact pitch 5.0 mm
KRESS 03/02 - 07/04
Screw terminal block, clamp with wire protector, upright version
contact pitch 10.0 mm
KRESL 03/02 - 05/03
Screw terminal block, clamp with wire protector, right angle version
contact pitch 10.0 mm
KREN
Screw terminal block for mains supply, with lift clamp with protection against misplacing, upright version
contact pitch 10.0 mm
KRENG
Screw terminal block for mains supply, with lift clamp with protection against misplacing, with stronger screw, upright version
contact pitch 10.0 mm
KS
Pluggable screw terminal block, clamp with wire protection, consecutive placement without loss of pitch, without side walls
KSC
Pluggable screw terminal block, clamp with wire protection, consecutive placement without loss of pitch, with side walls
KB
Socket board, upright, solder pins single row, consecutive placement without loss of pitch
KBQ
Socket board, upright, solder pins dual row staggered, consecutive placement without loss of pitch
KBWO
Socket board, angular, solder pins single row, consecutive placement without loss of pitch
KBW
Socket board, angular, solder pins single row, with retaining hooks for printed circuit board edge, consecutive placement without loss of pitch
6770
Pluggable terminal block, insulation displacement technique (IDT), with locking and test hole, cable departure 90° or 180° to plugging direction, consecutive placement without loss of pitch
SV
Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm
SV ...-8
Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 8 mm
New
SV ... C
Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm
New
SV ...-8 C
Plug acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 8 mm
WSV
Plug acc. to IEC 61076-2-106, IP40, right angle version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm
New
WSV ... C
Plug acc. to IEC 61076-2-106, IP40, angular version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm
KV
Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm
KV ...-8
Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, solder terminals and bend protection, for cable diameter up to 8 mm
New
KV ... C
Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm
New
KV ...-8 C
Socket acc. to IEC 61076-2-106, IP40, straight version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 8 mm
WKV
Socket acc. to IEC 61076-2-106, IP40, angular version, with threaded joint, solder terminals and bend protection, for cable diameter up to 6 mm
New
WKV ... C
Socket acc. to IEC 61076-2-106, IP40, angular version, with threaded joint, empty housing for reception of crimp contacts, with bend protection, for cable diameter up to 6 mm
SFV
Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for front mounting
New
SFV ... C
Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for front mounting
SGV
Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for back side mounting
New
SGV ... C
Chassis plug acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for back side mounting
SGR
Chassis plug acc. to IEC 61076-2-106, IP 40, with threaded joint, for printed circuit boards, for back side mounting
KFV
Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for front mounting
New
KFV ... C
Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for front mounting
KGV
Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint and solder terminals, for back side mounting
New
KGV ... C
Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, empty housing for reception of crimp contacts, for back side mounting
KFR
Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, for printed circuit boards, for front mounting
KGR
Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint, for printed circuit boards, for back side mounting
New
030398
Chassis socket acc. to IEC 61076-2-106, IP40, with threaded joint and ground contact, for printed circuit boards, for rear mounting
0331
Plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals
0332
Plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°
0332-1
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°
033200
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly
0365
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, shielded at 360°
036500
Plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and vibration protection, empty housing for reception of crimp contacts, 360° shielded, optimized assembly
0321
Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals
0322
Socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, 360° shielded
0322-1
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, shielded at 360°
032200
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, vibration protection and solder terminals, 360° shielded, optimized assembly
0360
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, shielded at 360°
036000
Socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and vibration protection, empty housing for reception of crimp contacts, 360° shielded, optimized assembly
0314
Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
0314-1
Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
0315
Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting
0315-1
Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting
0316
Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting
0316-1
Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting
0317
Chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting
0317-1
Chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting
031798-1
Chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and ground contact, for printed circuit boards, for back side mounting
0318
Flange chassis plug acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
0318-1
Flange chassis plug acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
0304
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
0304-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
0305
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting
0305-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint and solder terminals, for back side mounting
0362
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for front mounting
0363
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for back side mounting
0306
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting
0306-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for front mounting
0307
Chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting
0307-1
Chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, for printed circuit boards, for back side mounting
030798-1
Chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and ground contact, for printed circuit boards, for back side mounting
0308
Flange chassis socket acc. to IEC 61076-2-106, IP68, with threaded joint and solder terminals, for front mounting
0308-1
Flange chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint and solder terminals, for front mounting
036297
Flange chassis socket acc. to AISG specification and IEC 61076-2-106, IP68, with threaded joint, empty housing for reception of crimp contacts, for front mounting
0369
Crimp contact, contact pin gold-plated
0364
Crimp contact, contact bush gold-plated
0314-2
SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting
0315-2
SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for back side mounting
0316-2
SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for front mounting
0317-2
SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for rear mounting
New
031799-2
SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting, with hexagonal nut
031798-2
SWUM™ chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and ground contact, for printed circuit boards, manual soldering, for back side mounting
0318-2
SWUM™ flange chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting
0304-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting
0305-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for back side mounting
0306-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for front mounting
0307-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting
030799-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint, for printed circuit boards, manual soldering, for back side mounting, with hexagonal nut
030798-2
SWUM™ chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and ground contact, for printed circuit boards, manual soldering, for back side mounting
0308-2
SWUM™ flange chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68/67, with threaded joint and solder terminals, for front mounting
Obsolete
0315-1 U
Chassis plug acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint, cables and potted solder area, for back side mounting
Obsolete
0305-1 U
Chassis socket acc. to IEC 61076-2-106 and AISG specification, IP68, with threaded joint, cables and potted solder area, for back side mounting
0383
Protecting cap, IP68, for plugs, with chain
038399
Protecting cap, IP68, for plugs, without chain
038899
Protecting cap, IP68, for plugs, without chain
0381
Protecting cap, IP68, for sockets, with chain
038199
Protecting cap, IP68, for sockets, without chain
038799
Protecting cap, IP68, for sockets, without chain
0382
Shielding or ground contact ring for chassis plugs and sockets with front mounting
0384
Hexagonal nut for chassis plugs and sockets (spare part)
0385
Slit nut for chassis plugs and sockets (spare part)
0308 C 02
Flat gasket for flange chassis plugs and sockets
0322 C 16
Flat gasket for sockets 030..., 032..., 036... (spare part)
0380
Wrench for plugs and sockets IP68
ZMS 20
Wrench for chassis connectors
Further products on request
Cable assemblies with connectors 0332-1 and 0322-1 acc. to AISG specification
Further products on request
Cable assemblies with connectors 0315-1 U and 0305-1 U acc. to AISG specification and RAST 2.5 direct connector 3517 (RAST 2.5, insulation displacement technology)
0131
DIN plug, straight version, shielded, with metal housing, bend protection and solder terminals
0121
DIN socket, straight version, shielded, with metal housing, bend protection and solder terminals
0137
DIN plug with locking catch, straight version, shielded, with metal housing, bend protection and solder terminals
0103
DIN chassis socket, suitable for locking, shielded, with metal housing, flange and solder terminals
0105
DIN chassis socket, suitable for locking, right angle version, with ground contact, for printed circuit boards
Phasing out
010599
DIN chassis socket, suitable for locking, right angle version, with ground contact, for printed circuit boards
0132
DIN plug with bayonet lock, straight version, shielded, with metal housing, bend protection and solder terminals
0134
DIN plug with bayonet lock, angular version, contact carrier mountable in 0°, 90°, 180° and 270° orientation, shielded, with metal housing, bend protection and solder terminals
0122
DIN socket with bayonet lock, straight version, shielded, with metal housing, bend protection and solder terminals
0107
DIN chassis socket with bayonet lock, shielded, with metal housing, flange and solder terminals
MP-371
Miniature plug, straight version, with bend protection and solder terminals
MJ-372
Miniature socket, straight version, with bend protection and solder terminals
TM 0508 A
Miniature chassis socket, right angle version, shielded, for printed circuit boards
NES/J 135
Power supply plug, straight version, with solder eyes
NES/J 21
Power supply plug, straight version, with solder eyes
1633 02
Power supply plug, straight version, with solder eyes and bend protection
1633 03
Power supply plug, straight version, with fork-shaped contact, solder eyes and bend protection
NES/J 210
Power supply plug, long, straight version, with solder eyes
XNES/J 210
Power supply plug, long, straight version, with solder eyes and bend protection
NES/J 21 W
Power supply plug, angular version, with solder eyes
NES/J 25
Power supply plug, short, straight version, with solder eyes
1634 02
Power supply plug, straight version, with solder eyes and bend protection
1633 04
Power supply plug, straight version, with fork-shaped contact, solder eyes and bend protection
NES/J 250
Power supply plug, long, straight version, with solder eyes
XNES/J 250
Power supply plug, long, straight version, with solder eyes and bend protection
NEK/J 210
Power supply cable socket, straight version, with solder eyes and bend protection
NEK/J 250
Power supply cable socket, straight version, with solder eyes and bend protection
1614 17
Power supply chassis socket, straight version, with solder eyes, for front side mounting
New
1610 06
Power supply chassis socket, straight version, with solder eyes, for snap-in front side mounting
1614 16
Power supply chassis socket, straight version, with solder eyes, for front side mounting
Obsolete
1614 09
Power supply chassis socket, straight version, with solder eyes, for front side mounting
New
1614 23
Power supply chassis socket, straight version, with solder eyes, for printed circuit boards, for front side mounting
Obsolete
1614 14
Power supply chassis socket, straight version, with break contact and solder eyes, for back side mounting
New
1614 19
Power supply chassis socket, straight version, with break contact and solder eyes, for back side mounting
NEB/J 21 C
Power supply chassis socket, straight version, with break contact and solder eyes, for front side mounting
NEB/J 21
Power supply chassis socket, straight version, with fixing flange, break contact and solder eyes
Obsolete
1610 05
Power supply chassis socket, straight version, with solder eyes, for snap-in front side mounting
New
1610 07
Power supply chassis socket, straight version, with solder eyes, for snap-in front side mounting
Obsolete
1614 10
Power supply chassis socket, straight version, with solder eyes, for front side mounting
New
1614 24
Power supply chassis socket, straight version, with solder eyes, for printed circuit boards, for front side mounting
Obsolete
1614 15
Power supply chassis socket, straight version, with break contact and solder eyes, for back side mounting
New
1614 20
Power supply chassis socket, straight version, with break contact and solder eyes, for back side mounting
NEB/J 25 C
Power supply chassis socket, straight version, with break contact and solder eyes, for front side mounting
NEB/J 25
Power supply chassis socket, straight version, with fixing flange, break contact and solder eyes
1613 12
Power supply chassis socket, angular version, with break contact, for printed circuit boards
Obsolete
1613 20
Power supply chassis socket, angular version, with break contact, for printed circuit boards
1614 22
Power supply chassis socket, potted and with sealing towards mounting plate, IPx7, angular version, with break contact, for printed circuit boards
NEB/J 21 R
Power supply chassis socket, angular version, with break contact, for printed circuit boards
Obsolete
NEB 21 R-C
Power supply chassis socket, angular version, with break contact, for printed circuit boards
New
1613 32
Power supply chassis socket, angular version, with break contact, for printed circuit boards
Obsolete
1613 18
Power supply chassis socket, angular version, with break contact, for printed circuit boards
Obsolete
1613 14
Power supply chassis socket, angular version, with break contact, for printed circuit boards, surface mounting technology (SMT)
Obsolete
1613 28
Power supply chassis socket, angular version, with break contact, for printed circuit boards, surface mounting technology (SMT)
New
1613 30
Power supply chassis socket, angular version, with break contact, for printed circuit boards, surface mounting technology (SMT)
1613 21
Power supply chassis socket, angular version, with break contact, for printed circuit boards
New
1613 33
Power supply chassis socket, angular version, with break contact, for printed circuit boards, surface mounting technology (SMT)
1634 01
Power supply plug, straight version, with bayonet lock, with solder eyes
Obsolete
1610 04
Power supply chassis socket, straight version, with bayonet lock, with break contact and solder eyes, for front side mounting
1613 23
Power supply chassis socket, angular version, with bayonet lock, with break contact, for printed circuit boards
NES 1
Power supply plug acc. to DIN 45323, straight version, with solder eyes
NEB 1
Power supply chassis socket acc. to DIN 45323, straight version, with fixing flange and solder eyes
NEB 1 R
Power supply chassis socket acc. to DIN 45323, angular version, with flange and break contact, for printed circuit boards
New
1636 08
Power supply plug acc. to JEITA RC-5320A JSAP1, straight version, with solder eyes and bend protection
1636 02
Power supply plug acc. to JEITA RC-5320A JSAP2, straight version, with solder eyes and bend protection
1636 03
Power supply plug acc. to JEITA RC-5320A JSAP3, straight version, with solder eyes and bend protection
1636 04
Power supply plug acc. to JEITA RC-5320A JSBP4, straight version, with solder eyes and bend protection
1636 05
Power supply plug acc. to JEITA RC-5320A JSBP5, straight version, with solder eyes and bend protection
1636 06
Power supply plug acc. to JEITA RC-5322 JCBP1, straight version, with solder eyes and bend protection
1614 05
Power supply chassis socket acc. to JEITA RC-5320A JSBJ5, straight version, with break contact and solder eyes, for front side mounting
New
1613 25
Power supply chassis socket acc. to JEITA RC-5320A JSAJ11, angular version, with break contact, for printed circuit boards, surface mount technology (SMT)
Obsolete
1613 03
Power supply chassis socket acc. to JEITA RC-5320A JSAJ11, angular version, with break contact, for printed circuit boards
1613 05
Power supply chassis socket acc. to JEITA RC-5320A JSAJ21, angular version, with break contact, for printed circuit boards
Obsolete
1613 04
Power supply chassis socket acc. to JEITA RC-5320A JSAJ21, angular version, with break contact, for printed circuit boards
1613 24
Power supply chassis socket acc. to JEITA RC-5322 JSAJ21, angular version, with break contact, for printed circuit boards, surface mounting technology (SMT)
1613 07
Power supply chassis socket acc. to JEITA RC-5320A JSAJ31, angular version, with break contact, for printed circuit boards
1613 09
Power supply chassis socket acc. to JEITA RC-5320A JSBJ4, angular version, for printed circuit boards
1613 10
Power supply chassis socket acc. to JEITA RC-5320A JSBJ41, angular version, with break contact, for printed circuit boards
1613 11
Power supply chassis socket acc. to JEITA RC-5320A JSBJ51, angular version, for printed circuit boards, with break contact, for printed circuit boards
Obsolete
1613 19
Power supply chassis socket acc. to JEITA RC-5322 JCBJ11, angular version, with break contact, for printed circuit boards
New
1613 31
Power supply chassis socket, angular version, with break contact, for printed circuit boards
1636 07
Power supply plug, straight version, with solder eyes and bend protection
3 pole
1614 21
Power supply chassis socket, straight version, for front side mounting
3 pole
KLS 1
Jack plug acc. to JIS C 6560 JC25P2, 2.5 mm, 2 poles/mono, straight version, ball headed, with bend protection and solder terminals
KLS 10
Jack plug acc. to JIS C 6560 JC25P2, 2.5 mm, 2 poles/mono, straight version, cone headed, with bend protection and solder terminals
KLB 1
Jack chassis socket acc. to JIS C 6560 JC25P2B, 2.5 mm, 2 poles/mono, with break contact and solder eyes, for back side mounting
1501 09
Jack chassis socket acc. to JIS C 6560 JC25P2B, 2.5 mm, 2 poles/mono, angular version, with break contact and solder eyes, for printed circuit boards, for back side mounting
KLS 13
Jack plug acc. to JIS C 6560 JC25P3, 2.5 mm, 3 poles/stereo, straight version, with bend protection and solder terminal
KLB 13
Jack chassis socket acc. to JIS C 6560 JC25J3A, 2.5 mm, 3 poles/stereo, with solder eyes, upright version, for back side mounting
1501 05
Jack chassis socket acc. to JIS C 6560 JC25J3A, 2.5 mm, 3 poles/stereo, angular version, for printed circuit boards, with plastic collar
1501 14
Jack chassis socket acc. to JIS C 6560 JC25J3A, 2.5 mm, 3 poles/stereo, angular version, for printed circuit boards, with plastic collar
1501 04
Jack chassis socket acc. to JIS C 6560 JC25J3A, 2.5 mm, 3 poles/stereo, angular version, with metal collar, for printed circuit boards
1501 13
Jack chassis socket acc. to JIS C 6560 JC25J3A, 2.5 mm, 3 poles/stereo, angular version, with metal collar, for printed circuit boards
1501 02
Jack chassis socket acc. to JIS C 6560 JC25J3B, 2.5 mm, 3 poles/stereo, angular version, with 2 break contacts, for printed circuit boards, surface mounting technology (SMT)
KLS 2
Jack plug acc. to JIS C 6560 JC35P2, 3.5 mm, 2 poles/mono, straight version, ball headed, with bend protection and solder terminals
1532 06
Jack plug acc. to JIS C 6560 JC35P2, 3.5 mm, 2 poles/mono, straight version, cone headed, with bend protection and solder terminals
KLS 22
Jack plug acc. to JIS C 6560 JC35P2, 3.5 mm, 2 poles/mono, straight version, with metal housing, bend protection and solder terminals
WKLS 2
Jack plug acc. to JIS C 6560 JC35P2, 3.5 mm, 2 poles/mono, angular version, with solder terminals
1522 02
Jack socket acc. to JIS C 6560 JC35J2A, 3.5 mm, 2 poles/mono, straight version, with bend protection and solder terminals
1522 03
Jack socket acc. to JIS C 6560 JC35J2A, 3.5 mm, 2 poles/mono, straight version, with metal housing, bend protection and solder terminals
1502 03
Jack chassis socket acc. to JIS C 6560 JC35J2B, 3.5 mm, 2 poles/mono, straight/upright version, with break contact and solder eyes, for printed circuit boards, for back side mounting
1503 22
Jack chassis socket acc. to JIS C 6560 JC35J2B, 3.5 mm, 2 poles/mono, angular version, with break contact and solder eyes, for printed circuit boards, for back side mounting
1532 07
Jack plug insert acc. to JIS C 6560 JC35P3, 3.5 mm, 3 poles/stereo, straight version, with solder terminals
KLS 40
Jack plug acc. to JIS C 6560 JC35P3, 3.5 mm, 3 poles/stereo, straight version, with bend protection and solder terminal
New
1532 10
Jack plug acc. to JIS C 6560 JC35P3, 3.5 mm, 3 poles/stereo, straight version, with bend protection and solder terminal
KLS 44
Jack plug acc. to JIS C 6560 JC35P3, 3.5 mm, 3 poles/stereo, straight version, with metal housing, bend protection and solder terminals
1532 05
Jack plug acc. to JIS C 6560 JC35P3, 3.5 mm, 3 poles/stereo, with threaded joint, straight version, with metal housing, bend protection and solder terminals
WKLS 40
Jack plug acc. to JIS C 6560 JC35P3, 3.5 mm, 3 poles/stereo, angular version, with solder terminals
1520 01
Jack socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, straight version, with bend protection and solder terminals
1520 02
Jack socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, straight version, with metal housing, bend protection and solder terminals
Obsolete
KLB 4
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, with solder eyes, for back side mounting
New
1502 08
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, with solder eyes, for printed circuit boards, for back side mounting
1502 04
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, with threaded joint, with solder eyes, for front mounting
Obsolete
1502 01
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, upright version, for printed circuit boards
Obsolete
1502 06
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, upright version, for printed circuit boards
New
1502 07
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, upright version, for printed circuit boards
1503 18
Jack chassis socket acc. to JIS C 6560 JC35J3Z, 3.5 mm, 3 poles/stereo, upright version, with break contact, for printed circuit boards, with retaining hooks
New
1503 30
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, angular version, for printed circuit boards
Obsolete
1503 08
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, angular version, for printed circuit boards
Obsolete
1503 27
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, angular version, for printed circuit boards
New
1503 29
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, angular version, for printed circuit boards
1503 02
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, angular version, for printed circuit boards, surface mounting technology (SMT), manual soldering only
1503 03
Jack chassis socket acc. to JIS C 6560 JC35J3A, 3.5 mm, 3 poles/stereo, angular version, for printed circuit boards, surface mounting technology (SMT)
KLBR 4
Jack chassis socket, 3.5 mm acc. to JIS C 6560 JC35J3Z, 3 poles/stereo, angular version, with break contact, for printed circuit boards
1503 09
Jack chassis socket acc. to JIS C 6560 JC35J3B, 3.5 mm, 3 poles/stereo, angular version, with 2 break contacts and solder eyes, for printed circuit boards, for back side mounting
1503 17
Jack chassis socket acc. to JIS C 6560 JC35J3B, 3.5 mm, 3 poles/stereo, angular version, with 2 break contacts and solder eyes, for printed circuit boards, for back side mounting
1532 02
Jack plug according to JEITA RC-5325A JC35P4, 3.5 mm, 4 poles/stereo, straight version, with bend protection and solder terminals
1502 02
Jack chassis socket according to JEITA RC-5325A JC35C4A, 3.5 mm, 4 poles/stereo, upright version, with solder eyes, for back side mounting
1503 19
Jack chassis socket according to JEITA RC-5325A JC35J4A, 3.5 mm, 4 poles/stereo, angular version, for printed circuit boards
1503 16
Jack chassis socket according to JEITA RC-5325A JC35J4A, 3.5 mm, 4 poles/stereo, potted IPx7, angular version, for printed circuit boards
1503 15
Jack chassis socket according to JEITA RC-5325A JC35J4A, 3.5 mm, 4 poles/stereo, angular version, for printed circuit boards, surface mount technology (SMT)
Obsolete
1503 13
Jack chassis socket according to JEITA RC-5325A JC35J4A, 3.5 mm, 4 poles/stereo, angular version, for printed circuit boards, surface mount technology (SMT)
New
1503 31
Jack chassis socket according to JEITA RC-5325A JC35J4A, 3.5 mm, 4 poles/stereo, angular version, for printed circuit boards, surface mount technology (SMT)
New
1503 26
Jack chassis socket according to JEITA RC-5325A JC35J4A, 3.5 mm, 4 poles/stereo, potted and with sealing towards mounting plate, IPx7, angular version, for printed circuit boards, surface mount technology (SMT)
1503 28
Jack chassis socket according to JEITA RC-5325A, 3.5 mm, 4 poles/stereo, with two break contacts, angular version, for printed circuit boards, surface mount technology (SMT), for mid-mount placement
KLSM 3
Jack plug acc. to JIS C 6560 JC63P2, 6.35 mm, 2 poles/mono, straight version, with bend protection and solder terminals
KLKM 3
Jack socket acc. to JIS C 6560 JC63J2A, 6.35 mm, 2 poles/mono, straight version, with bend protection and solder terminals
KLBM 3
Jack chassis socket acc. to JIS C 6560 JC63J2A, 6.35 mm, 2 poles/mono, with solder eyes, for back side mounting
KLS 3
Jack plug acc. to JIS C 6560 JC63P3, 6.35 mm, 3 poles/stereo, straight version, with bend protection and solder terminals
KLK 3
Jack socket acc. to JIS C 6560 JC63J3A, 6.35 mm, 3 poles/ stereo, straight version, with bend protection and solder terminals
KLB 3
Jack chassis socket acc. to JIS C 6560 JC63J3A, 6.35 mm, 3 poles/stereo, with solder eyes, for back side mounting
KLBP 3
Jack chassis socket acc. to JIS C 6560 JC63J3A, 6.35 mm, 3 poles/stereo, with solder eyes, for back side mounting
KLBPS 3
Jack chassis socket acc. to JIS C 6560 JC63J3Z, 6.35 mm, 3 poles/stereo, with break contact and solder eyes, for back side mounting
1505 01
Jack chassis socket acc. to JIS C 6560 JC63J3E, 6.35 mm, 3 poles/stereo, with 2 change-over switches and solder eyes, for back side mounting
STO 1
RCA plug acc. to JEITA RC-5231, straight version, with solder terminals
XSTO 1
RCA plug acc. to JEITA RC-5231, straight version, with bend protection and solder terminals
STO 2
RCA plug acc. to JEITA RC-5231, straight version, with metal housing, bend protection and solder terminals
1573 01 V
RCA plug, straight version, with metal housing, bend protection and solder terminals
XKTO 1
RCA socket acc. to JEITA RC-5231, straight version, with bend protection and solder terminals
BTO 1
RCA chassis socket acc. to JEITA RC-5231, with solder eyes, for front side mounting
BTO 1 V
RCA chassis socket acc. to JEITA RC-5231, with solder eyes, for front side mounting
New
1571 01
RCA chassis socket acc. to JEITA RC-5231, upright version, for printed circuit boards
New
1570 01
RCA plug, straight version, with solder terminals
2410 08
USB 2.0 chassis plug type A, angular version, for printed circuit boards
2410 07
USB 2.0 chassis plug type A, angular version, for printed circuit boards, surface mounting technology (SMT)
2410 11
USB 2.0 chassis socket type A, upright version, for printed circuit boards
2410 12
USB 2.0 chassis socket type A, angular version, for printed circuit boards
2410 14
USB 2.0 chassis socket type A, angular version, for printed circuit boards, surface mounting technology (SMT)
2410 13
Double USB 2.0 chassis socket type A, angular version, for printed circuit boards, with ground contacts at the front
2410 05
Double USB 2.0 chassis socket type A, angular version, for printed circuit boards
2411 05
USB 2.0 chassis socket type B, upright version, for printed circuit boards
2411 06
USB 2.0 chassis socket type B, angular version, for printed circuit boards
2411 07
USB 2.0 chassis socket type B, angular version, for printed circuit boards
2486 04
Mini USB 2.0 chassis socket type B, 5 poles, angular version, for printed circuit boards, surface mounting technology (SMT)
2486 02
Mini USB 2.0 chassis socket type AB, 10 poles, angular version, for printed circuit boards, surface mounting technology (SMT)
2420 01
USB 3.0 chassis socket type A, angular version, for printed circuit boards
2436 01
USB 3.1 chassis socket type C, 24 poles, angular version, for printed circuit boards, surface mounting technology (SMT)
2436 02
USB 3.1 chassis socket type C, 24 poles, angular version, for printed circuit boards, surface mounting technology (SMT/THR)
2434 01
USB 3.1 chassis socket type C, 24 poles, with sealing towards mounting plate, angular version, for printed circuit boards, surface mounting technology (SMT/THR)
2436 04
USB 3.1 chassis socket type C, 24 poles, angular version, for printed circuit boards, surface mounting technology (SMT), for mid-mount placement
2436 03
USB 3.1 chassis socket type C, 24 poles, angular version, for printed circuit boards, surface mounting technology (SMT/THR), for mid-mount placement
2483 01
USB 3.0 adapter, type A 3.0 socket to type C 3.1 plug
2417 03
IEEE 1394 socket, 6 poles, angular version, for printed circuit boards, surface mounting technology (SMT)
P 126
Modular plug, 4p4c (RJ10), with locking latch, piercing technology
P 127
Modular plug, 6p4c (RJ14), with locking latch, piercing technology
P 128
Modular plug, 6p6c (RJ12), with locking latch, piercing technology
P 129
Modular plug, 8p8c (RJ45), with locking latch, piercing technology
P 129 S
Modular plug, 8p8c (RJ45), with locking latch and shielding, piercing technology
P 303
Modular plug, 10p10c (RJ50), with locking latch, piercing technology
P 303 S
Modular plug, 10p10c (RJ50), with locking latch and shielding, piercing technology
New
2542 01
Modular plug, Cat. 6a, 8p8c (RJ45), straight version, with protected locking latch and shielding, toolless connection in insulation displacement technology (IDT)
New
2542 02
Modular plug, Cat. 6a, 8p8c (RJ45), straight version, with protected locking latch, shielding and bend protection, toolless connection in insulation displacement technology (IDT)
New
2542 03
Modular plug, Cat. 6a, 8p8c (RJ45), angular version (twistable), with protected locking latch and shielding, toolless connection in insulation displacement technology (IDT)
New
2542 05
Modular chassis socket, Cat. 6a, 8p8c (RJ45), straight version, with shielding, toolless connection in insulation displacement technology (IDT)
New
2542 04
Double modular socket, Cat. 6a, 8p8c (RJ45), straight version, with shielding
P 137 S
Modular chassis socket, 8p8c (RJ45), angular, with shielding, lower side locking and flange, for printed circuit boards
P 136
Modular chassis socket, 8p8c (RJ45), upright, with full shielding and flange, for printed circuit boards
2533 01
Protective cap for modular sockets (RJ45)
4510
Aux-in interface according to automotive standard requirements (USCAR), with jack sockets 3.5 mm, stereo, design and fixing according to customers requirements
4511
Aux-in interface according to automotive standard requirements (USCAR), with jack sockets 3.5 mm, stereo, with optional break contact, design and fixing according to customers requirements
4512
USB 2.0 interface according to automotive standard requirements (USCAR), 360° shielded, design and fixing according to customers requirements
4514
RCA interface for audio/video applications according to automotive standard requirements (USCAR), design and fixing according to customers requirements
CZK03
Manual tongs for termination of crimp contacts for circular connectors, with contact positioning device
CZB03-0364
Manual tongs for termination of crimp contacts for circular connectors, with automatic feeding from reel
CZB03-0369
Manual tongs for termination of crimp contacts for circular connectors, with automatic feeding from reel
CAW03
Processing tool for crimp contacts for circular connectors, for use with suitable operating machines
ZP25-2
Manual tongs for termination of modular plugs, piercing technology, with ratchet, cutter and stripper
ZP25-3
Manual tongs for termination of modular plugs, piercing technology, with ratchet, cutter and stripper
HZ30
Tongs for termination of Micromodul™ connectors in insulation displacement technology (IDT)
HZ-M30
Modular manual tongs for termination of Micromodul™ connectors in insulation displacement technology (IDT)
KHP30
Knuckle-joint press for termination of Micromodul™ connectors in insulation displacement technology (IDT)
PP30
Electropneumatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
HA30e-R
Semiautomatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
HZ-M3022
Modular manual tongs for termination of Micromodul™ connectors in insulation displacement technology (IDT)
KHP3022
Knuckle-joint press for termination of Micromodul™ connectors in insulation displacement technology (IDT)
PP3022
Electropneumatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
HA3022e-R
Semiautomatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
CZ31
Manual tongs for termination of Minimodul™/Multimodul™ crimp contacts
CZK31
Manual tongs for termination of Minimodul™/Multi modul™ crimp contacts, with contact positioning device
CZB31-01
Manual tongs for termination of Minimodul™/-Multimodul™ crimp contacts
CZB31-03
Manual tongs for termination of Minimodul™/Multimodul™ crimp contacts
CAW31-01
Processing tool for Minimodul™/Multimodul™ crimp contacts, for use with suitable operating machines
CAW31-03
Processing tool for Minimodul™/Multimodul™ crimp contacts, for use with suitable operating machines
New
HA33f-CA-KC
Semiautomatic harnessing machine for termination of RAST 1.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection and keying cutting, individual upgrading possible
New
HA33f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 1.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible
New
HA33f-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 1.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting, keying testing and high-voltage test
New
HA33f-KC
Semiautomatic harnessing machine for termination of RAST 1.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for keying cutting, individual upgrading possible
New
HA33f-KC-KT
Semiautomatic harnessing machine for termination of RAST 1.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for keying cutting and keying testing, individual upgrading possible
HZ35
Manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ-M35
Modular manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HZ35-K
Hand tongs for keying of pre-terminated RAST 2.5 connectors according to RAST 2.5 standard
KHP35
Knuckle-joint press for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
HA35e
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine, limited upgrading possible
HA35e-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible
HA35e-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated removal of connector chain interlinks, limited upgrading possible
HA35e-RK-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible
New
HA35e-DC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, machine to be adapted to the application's requirements
HA35f
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, individual upgrading possible
HA35f-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated cable color detection, individual upgrading possible
HA35f-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection and keying cutting, individual upgrading possible
HA35f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting, keying testing and high-voltage test
HA35f-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for keying cutting, individual upgrading possible
HA35f-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for keying cutting and keying testing, individual upgrading possible
HA35f-RK
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for removal of connector chain interlinks, individual upgrading possible
HA35f-RK-CA
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks and cable color detection, individual upgrading possible
HA35f-RK-CA-KC
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, individual upgrading possible
HA35f-RK-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting and keying testing, individual upgrading possible
HA35f-RK-CA-KC-KT-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, fully eqipped with integrated stations for removal of connector chain interlinks, cable color detection, keying cutting, keying testing and high-voltage test
HA35f-HV
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), larger base machine, with integrated station for high-voltage test, individual upgrading possible
HZ354
Manual tongs for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
New
HZ35-V
Tongs for extending RAST 2.5 connector chains
KHP354
Knuckle-joint press for termination of RAST 2.5 connectors in insulation displacement technology (IDT)
New
HA354e-ST
Semiautomatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), with integrated cable color detection
HZ-M357
Modular manual tongs for termination of RAST 2.5 Power connectors in insulation displacement technology (IDT)
KHP357
Knuckle-joint press for termination of RAST 2.5 Power connectors in insulation displacement technology (IDT)
HA357e
Semiautomatic harnessing machine for termination of RAST 2.5 Power connectors in insulation displacement technology (IDT)
HA357e-CA
Semiautomatic harnessing machine for termination of RAST 2.5 Power connectors in insulation displacement technology (IDT), with integrated cable color detection
New
HA357f-CA-KC-KT
Semiautomatic harnessing machine for termination of RAST 2.5 Power connectors in insulation displacement technology (IDT), larger base machine, with integrated stations for cable color detection, keying cutting and keying testing, individual upgrading possible
New
HZ357-V
Tongs for extending RAST 2.5 Power connector chains
KHP35 plus
Knuckle-joint press for termination of RAST 2.5 plus™ connectors in insulation displacement technology (IDT)
HA35 plus
Semiautomatic harnessing machine for termination of RAST 2.5 plus™ connectors in insulation displacement technology (IDT), with integrated cable color detection
KHP357 plus
Knuckle-joint press for termination of RAST 2.5 Power plus™ connectors in insulation displacement technology (IDT)
HA357 plus
Semiautomatic harnessing machine for termination of RAST 2.5 plus™ connectors in insulation displacement technology (IDT), with integrated cable color detection
HZ-M36
Modular manual tongs for termination of RAST 5 connectors in insulation displacement technology (IDT)
HZ36-K
Hand tongs for keying of pre-terminated RAST 5 connectors according to RAST 5 standard
New
HZ3611-K
Hand tongs for keying of RAST 5 connectors with screw clamp termination according to RAST 5 standard
KHP36
Knuckle-joint press for termination of RAST 5 connectors in insulation displacement technology (IDT)
HA36e
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT)
HA36e-CA
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT), with integrated cable color detection
KHP364
Knuckle-joint press for termination of RAST 5 connectors in insulation displacement technology (IDT)
New
HA364e-ST
Semiautomatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT), with integrated cable color detection
KHP369
Knuckle-joint press for termination of RAST 7.5 Power™ connectors in insulation displacement technology (IDT)
New
HA37e
Semiautomatic harnessing machine for termination of RAST 7.5 Power connectors in insulation displacement technology (IDT)
New
HA37e-CA
Semiautomatic harnessing machine for termination of RAST 7.5 Power connectors in insulation displacement technology (IDT), with integrated cable color detection
KHP67
Knuckle-joint press for termination of pluggable terminal blocks in insulation displacement technology (IDT)
HA7335e
Semiautomatic harnessing machine for termination of SmartSKEDD connectors in insulation displacement technology (IDT), small base machine, limited upgrading possible
HA7335e-CA
Semiautomatic harnessing machine for termination of SmartSKEDD connectors in insulation displacement technology (IDT), small base machine with integrated cable color detection, limited upgrading possible
New
PP-STS2,5
Electropneumatic notch press, for end-side punching of ribbon cables
HA3...e
Processing modules for termination of connectors in insulation displacement technology (IDT), for use with suitable fully automatic harnessing machines
New
VARICON 1000-Eco
Fully automatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
VARICON 1000
Fully automatic harnessing machine for termination of Micromodul™ connectors in insulation displacement technology (IDT)
New
VARICON 7000-Unica-35
Fully automatic harnessing machine for termination of RAST 2.5 connectors in insulation displacement technology (IDT), for divers harness configurations
New
VARICON 7000-Unica-357
Fully automatic harnessing machine for termination of RAST 2.5 Power connectors in insulation displacement technology (IDT), for divers harness configurations
New
VARICON 7000-Unica-36
Fully automatic harnessing machine for termination of RAST 5 connectors in insulation displacement technology (IDT), for divers harness configurations
VARICON 7000-Inline
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Inline-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-Eco
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-Eco-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000-RD
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
VARICON 7000-RD-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), combined with additional crimp contacts, for flexible harness configurations
VARICON 7000
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for flexible harness configurations
New
VARICON 7000-DC
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses, for flexible harness configurations, machine to be adapted to the application's requirements
New
VARICON 7000-DC-CR
Versatile, fully automatic harnessing machine for termination of RAST connectors in insulation displacement technology (IDT), for production of daisy chain harnesses combined with additional crimp contacts, for flexible harness configurations, machine to be adapted to the application's requirements